Identification of novel PfDHODH inhibitors as antimalarial agents via pharmacophore-based virtual screening followed by molecular docking and in vivo antimalarial activity

Plasmodium falciparum dihydroorotate dehydrogenase (PfDHODH) catalyses the fourth reaction of de novo pyrimidine biosynthesis in parasites, and represents an important target for the treatment of malaria. In this study, we describe pharmacophore-based virtual screening combined with docking study and biological evaluation as a rational strategy for identification of novel hits as antimalarial agents. Pharmacophore models were established from known PfDHODH inhibitors using the GALAHAD module with IC₅₀ values ranging from 0.033 μM to 142 μM. The best pharmacophore model consisted of three hydrogen bond acceptor, one hydrogen bond donor and one hydrophobic features. The pharmacophore models were validated through receiver operating characteristic and Günere–Henry scoring methods. The best pharmacophore model as a 3D search query was searched against the IBS database. Several compounds with different structures (scaffolds) were retrieved as hit molecules. Among these compounds, those with a Q_FIT value of more than 81 were docked in the PfDHODH enzyme to further explore the binding modes of these compounds. In silico pharmacokinetic and toxicities were predicted for the best docked molecules. Finally, the identified hits were evaluated in vivo for their antimalarial activity in a parasite inhibition assay. The hits reported here showed good potential to become novel antimalarial agents.     

Ionic liquid coated iron nanoparticles are promising peroxidase mimics for optical determination of H<Subscript>2</Subscript>O<Subscript>2</Subscript>

Ionic liquid coated nanoparticles (IL-NPs) consisting of zero-valent iron are shown to display intrinsic peroxidase-like activity with enhanced potential to catalyze the oxidation of the chromogenic substrate 3,3′,5,5′-tetramethylbenzidine (TMB) in the presence of hydrogen peroxide. This results in the formation of a blue green colored product that can be detected with bare eyes and quantified by photometry at 652 nm. The IL-NPs were further doped with bismuth to enhance its catalytic properties. The Bi-doped IL-NPs were characterized by FTIR, X-ray diffraction and scanning electron microscopy. A colorimetric assay was worked out for hydrogen peroxide that is simple, sensitive and selective. Response is linear in the 30–300 μM H₂O₂ concentration range, and the detection limit is 0.15 μM.

Open image in new window

Graphical abstract Schematic of ionic liquid coated iron nanoparticles that display intrinsic peroxidase-like activity. They are capable of oxidizing the chromogenic substrate 3,3′,5,5′-tetramethylbenzidine (TMB) in the presence of hydrogen peroxide. This catalytic oxidation generated blue-green color can be measured by colorimetry. Response is linear in the range of 30–300 μM H₂O₂ concentration, and the detection limit is 0.15 μM.

     

Trace Element Evaluation of Different Varieties of Chewing Gum by Radiochemical Neutron Activation Analysis

Extensive use of chewing gums, by children in particular, entails the evaluation of trace element contents in them. Radiochemical neutron activation analysis (RNAA) was successfully employed to determine the concentration of 35 trace elements (essential, toxic and nonessential) in eight different brands of chewing gum generally consumed in Rawalpindi/Islamabad area. Comparison of trace element data of our work with literature has been presented. None of the elements detected in the brands of chewing gum examined was found to be present at a level representing a substantial contribution to the total dietary intake of the element.     

Extraction and preconcentration of selenium from aqueous solutions and its determination in water and hair samples by atomic-absorption spectrophotometry

Several organic solvents, including benzene, xylene, toluene, nitrobenzene, chloroform, carbon tetrachloride, chlorobenzene and high molecular-weight pyridines such as 4-(5-nonyl)pyridine, 2-hexyl-pyridine and benzylpyridine have been investigated as components of systems for the extraction and preconcentration of selenium from nitric acid solutions containing iodide. The results are discussed in terms of choice of reagents and the acid and iodide concentrations, and of several other parameters affecting the extraction. The utility of the method for separation of selenium from aqueous solution has been evaluated. The method has been used for preconcentration of trace levels of selenium from water and hair samples for determination by atomic-absorption spectrophotometry.     

Oxygen‐barrier properties of oriented and heat‐set poly(ethylene terephthalate)

The improvement in the oxygen‐barrier properties of poly(ethylene terephthalate) (PET) by orientation and heat setting was examined. Orientation was carried out at 65 °C by constrained uniaxial stretching to a draw ratio of about 4. Heat setting was performed at temperatures from 90 to 160 °C with the specimen taut. Orientation decreased the permeability of PET to almost one‐third that of the unoriented, amorphous polymer because of decreases in both the diffusion coefficient and the solubility coefficient. The proposed two‐phase model for oriented PET consisted of a permeable isotropic amorphous phase (density = 1.335 g/cm³) with ethylene linkages predominately in the gauche conformation and an impermeable oriented phase (density = 1.38 g/cm³) with ethylene linkages that had transformed from the gauche conformation to the trans conformation during stretching. Chain segments in the trans conformation did not possess crystalline order; instead, they were viewed as forming an ordered amorphous phase. Crystallization by heat setting above the glass‐transition temperature did not dramatically affect the permeability. However, a decrease in the diffusion coefficient, offset by an increase in the solubility coefficient, indicated that crystallization affected the barrier properties of the permeable amorphous phase. Analysis of the barrier data, assuming a two‐phase model with variable density for both the permeable and impermeable phases, revealed that the impermeable phase density increased during crystallization, approaching a value of 1.476 g/cm³. This value is consistent with previous measurements of the density of the defective crystalline phase in PET. The density of the permeable amorphous phase decreased concurrently to about 1.325 g/cm³, indicating the appearance of additional free volume. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1679–1686, 2000     

Extraction of molybdenum(VI) by 4-(5-nonyl)pyridine in benzene from aqueous mineral acid solutions containing thiocyanate ions

Extraction of Mo(VI) by 4-(5-nonyl)pyridine (NPy) in benzene from mineral acid solutions containing thiocyanate ions has been investigated at room temperature (23±2°C). From mineral acid (HCl, HNO₃, and H₂SO₄) solutions alone Mo(VI) is not extracted quantitatively while the presence of small amounts of KSCN in the system augments the extraction by a large factor. Stoichiometric studies indicate that ion-pair type complexes (NPyH)₂·[MoO₂(SCN)₄] are responsible for the extraction. Separation factors determined at fixed extraction conditions (0.1M Npy/C₆H₆–0.1M acid +0.2M KSCN) reveal that Ag(I), Cu(II), Co(II), Zn(II), Hg(II) and U(VI) are co-extracted while a clean separation from alkali metals, alkaline earths and some transition metals like Ln(III), Zr(IV), Hf(IV), Cr(III), Cr(VI) and Ir(III) is possible. Some of the complexing anions like oxalate, citrate, acetate, thiosulfate or ascorbate do not affect the degree of extraction of Mo(VI) allowing it to be recovered from diverse matrices.     

Impact of Pb substitution on the formation of high <Emphasis Type=Italic>T</Emphasis><Subscript>c</Subscript> superconducting phase in BSCCO system derived through sol-gel process

Sol-gel process was employed to synthesize the Pb-BSCCO system having general composition Bi_2−xPb_xSr₂Ca₂Cu₃O_10−δ, where x=0.2, 0.4 and 0.8. Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), dilatometry and vibrating sample magnetometer (VSM) were employed to study the materials produced at different stages. Two-stage heating firstly at 300 and then 800°C was adopted in order to avoid the burning of the materials and formation of carbonates. The carbonate formation was avoided by heating the materials firstly at 300°C for 2 h and without intermediate cooling moved to the furnace having temperature 800°C and hold for 2 h. The sintering behaviour of samples was studied by dilatometry and the results revealed that the sample having x=0.4 was stabled up to a temperature of 700°C while samples having x=0.2 and 0.8 to a temperature of 625°C. The maximum shrinkage was observed at 850°C in all the samples. On the basis of dilatometry results, the samples were sintered at 845°C for 60 h to observe the superconducting phases. The highest volume fraction of high superconducting phase (2223) was noticed in the sample containing x=0.4 having onset T _c=110 K.     

Behavioral effects of a four-wing attractor with circuit realization: a cryptographic perspective on immersion

In this paper, we propose an innovative chaotic system, combining fractional derivative and sine-hyperbolic nonlinearity with circuit execution. The study of this system is conducted via an analog circuit simulator, using two anti-parallel semiconductor diodes to provide hyperbolic sine nonlinearity, and to function as operational amplifiers. The multi-stability of the system is also enhanced with the help of multi-equilibrium points for distinct real orders of system. The system explores the generation of a four-wing attractor in different phases, both numerically and electronically. By changing the input parameters of the system, different graphs are generated for current flow in state, phase, and space, to confirm the precision of the fractional order derivatives. A reasonable simulation shows that the deliberate circuit provides effective chaos in terms of speed and accuracy, which is comensurate with the numerical simulation. This nonlinear chaotic behavior is utilized to encrypt sound (.wav), images (.jpg), and animated (.gif) data which are a major requirement for the security of communication systems. The proposed circuit performs chaos and cryptographic tasks with high-effective analog computation, and constitutes a novel approach to this area of research.     

Fast mecury removal from industrial effluent

The use of a naturally available Lateritic Soil (LS) for the removal of mercury from industrial effluents has been investigated. Adsorption of Hg on LS from aqueous solution is reported, describing the effect of equilibration time, hydrogen ions, adsorbent and adsorbate concentration. The contact time required is less than two minutes and adsorption capacity is 15 g/kg.