Synthesis of poly[arylene ether sulfone-b-vinylidene fluoride] block copolymers

A series of α,ω-dihydroxy polyarylene sulfones (PAES) were synthesized comprising bisphenol A (PAES1, M_n=1800, 4900, and 9500 daltons), 4,4^′-biphenol (PAES2, M_n=4100 daltons), and hexafluorobisphenol A (PAES3, M_n=3300 daltons). These were reacted with α,ω-dibromo poly(vinylidene fluoride) (PVDF, M_n=1200 daltons) prepared by telomerization, to yield block copolymers possessing rigid and flexible segments. Block copolymers were characterized by FTIR, NMR, GPC, DSC, TGA and TEM. In several cases the block copolymers exhibited distinct thermal transitions, i.e. T_m and T_g for PVDF and PAES segments, respectively. Where observable, T_g of PAES domains in the block copolymers occurred at a temperature lower than the corresponding PAES homopolymer due to the flexible nature of the surrounding PVDF domains. Block copolymers exhibited a similar thermal stability to the corresponding PAES homopolymers but higher stability than the PVDF homopolymer, and much higher still than α,ω-dibromo PVDF. TEM analyses indicate that phase separation of PAES and PVDF domains occurs on the nanometer scale.     

On the Criteria of Instability for Electrochemical Systems

Both cyclic-voltammetry-based and impedance-based experimental criteria that have been developed recently for the oscillatory electrochemical systems are critically appraised with two typical categories of oscillators.Consistent conclusions can be drawn by the two criteria for the category of oscillators that involve the coupling of charge transfer mainly with surface steps(e.g.ad-and desorption)such as in the electrooxidation of C1 organic molecules.Whereas,impedance-based criterion is not applicable to the category of oscillators that involve the coupling of charge transfer mainly with mass transfer(e.g.diffusion and convection) such as in the Fe(CN)6^3- reduction accompanying periodic hydrogen evolution.The reason is that the negative impedance cannot include the feedback information of convection mass transfer induced by the hydrogen evolution.However,both positive and negative nonlinear feedbacks,i.e., the diffusion-limited depletion and convection-enhanced replenishment of the Fe(CN)6^3- surface concentration,that coexist between the bistability,i.e.,Fe(CN)6^3- reduction with and without hydrogen evolution at lower and higher potential sides respectively,are all reflected in the crossed cyclic voltammogram(CCV).It can be concluded that the voltammetry-based criterion(in time domain)is more intuitive,less time-consuming and has a wider range of applications than the impedancebased one (in frequency domain).     

Dynamics of curved DNA molecules: prediction and experiment

We have developed a quantitative predictive model capable of describing the dynamics of migration of intrinsically curved DNA fragments on polyacrylamide gels. The model takes into account structural features of DNA, end-to-end distance, screening of hydrodynamic interactions, ionic strength of buffer, electrostatic persistence length, structural fluctuations of the macromolecule, counter condensation, and variation of dielectric constant and viscosity of water with MPD. In doing so, we have also addressed a decade old issue on the effect of the organic solvent 2-methyl-2,4-pentanediol on gel migration of phased A-tracts. We show here that A-tract-solvent interactions are less favored compared with A-tract-A-tract and solvent-solvent interactions.     

无亲水基团取代的四苯基卟吩类LB膜的制备与表征

拉制了4种无亲水基团的四苯基卟吩LB膜,用透射电镜、荧光寿命、荧光光谱和紫外-可见光谱测量表征了膜的形貌和结构,发现膜中卟吩主要以聚集体形式存在。     

Precise and accurate determination of the stoichiometry of CuInS2 semiconductor material by electrochemical methods

Summary CuInS₂ is one of the important I–III–VI₂ ternary compounds which has in recent years received increasing interest in semiconductor science. In this study an electrochemical method has been developed based on a limited amount of available sample (0.5–10mg) for the precise and accurate determination of CuInS₂ composition. After decomposition of the sample in concentrated HNO₃ under pressure, copper and indium were sequentially determined by constant potential coulometry, and sulfur (as sulfate) by amperometric titration. Various experimental parameters which ensure high precision and accuracy of the results were carefully evaluated and calibrated. The overall errors for the determination of copper, indium and sulfur in a 10 mg sample were found to be +0.10%, –0.12% and +0.16%, respectively, which fullfills the requirement for accurate stoichiometric assessment.

---

Reproduzierbare und genaue Bestimmung der Stöchiometrie von CuInS₂-Halbleitermaterial mit Hilfe elektrochemischer Verfahren

---

Presented at the 10th International Symposium on Microchemical Techniques, August 25–29, 1986, Antwerp, Belgium     

Predicting adsorption isotherms of low-volatile compounds by temperature programmed desorption: iodine on carbon

Equilibrium adsorption isotherms for low-volatile compounds are extremely difficult to measure. A simple technique using temperature programmed desorption (TPD) is proposed. It is demonstrated that the two parameters needed for constructing the Langmuir isotherm can be derived with data from the TPD technique alone. Thus, the Langmuir isotherms of iodine on AX-21 super-activated carbon were obtained with this technique. A series of TPD experiments for samples with different initial loadings of iodine were carried out by varying the heating rates which resulted in different peak desorption temperatures. The peak desorption temperature decreased as the initial loading was increased because of the re-adsorption effect. The Langmuir constant was derived from kinetic theory with the activation energy for desorption obtained from the experiment. The activation energy for desorption was 12.3 kcal/mol. The Langmuir constants determined by this technique were in comparable order of magnitude to the reported values for iodine on activated carbon. The saturation capacity of AX-21 for iodine could also be determined from the TPD data obtained from samples with different initial loadings. The estimated saturation capacity from the TPD experiment was 2.96 g I(2)/g AX-21, which was close to the experimentally measured saturation capacity of 3.25 g I(2)/g AX-21 for the same system.     

Pseudo[n,m]rotaxanes of Cucurbit[7/8]uril and Viologen‐Naphthalene Derivative: A Precise Definition of Rotaxane

Rotaxane is a kind of classic supramolecule, which is usually constructed from a number of macrocycles and one axis molecule. Herein, we have expanded the supramolecular structure of [n]rotaxane to offer a precise definition of (pseudo)[n,m]rotaxane for accurately describing the two kinds of (pseudo)rotaxanes structures, which are self‐assembled from cucurbit[7/8]uril (CB[7/8]) and viologen‐naphthalene derivative, respectively. Furthermore, these CB‐based pseudorotaxanes exhibit varied photophysical properties, stimuli‐responsive behavior triggered by competitive guest, and self‐sorting behavior.     

Study of Six Polycyclic Aromatic Hydrocarbons by Chemical Deoxygenation Microemulsion-Stabilized Room Temperature Phosphorimetry

Six polycyclic aromatic hydrocarbons (PAHs) are studied by chemical deoxygenation microemulsion-stabilized room temperature phosphorimetry with sodium sulfite as an oxygen scavenger and thallous nitrate as a heavy atom perturber in sodium dodecyl sulfate medium. Several factors influencing room temperature phosphorescence such as the concentration of sodium dodecyl sulfate, the heavy atom concentration, the pH, and the concentration of sodium sulfite are discussed and the quenching effect of NO₂⁻on room temperature phosphorimetry of PAHs was compared in the microemulsion and micelle media.     

活性炭自溶液吸附锌(II)离子及其配合物

近年来，有人提出通过表面处理提高活性炭表面电荷，加强对无机离子吸附力等观点，但活性炭对无机离子的吸附活性点，表面含氧基团及配体对吸附的影响等重要问题仍众说纷经[1－4]为此，本文提出用氧化一负离子化法处理活性炭，以表面酸度表征表面含氧基团的量，探讨活性炭对Zn（Ⅱ）及其配合物的吸附特性．1试验（1）试验材料活性发由北京光华木材厂出品，分析纯．过20－30目，BET法测得比表面为1316m2·g-1．在2．5×10－2mlo·dm－3的NaNO3中，测得等电点pHIEP为7．75[5]，元素含量（质量分数）为C（83．9％），N（0．07％），H（1…     

Chemical composition of the volatile oil from Cynanchum stauntonii and its activities of anti-influenza virus

The volatile oil of the roots of Cynanchum stauntonii was examined by gas chromatography–mass spectrometry (GC–MS). Thirty-eight constituents were identified. (E,E)-2,4-Decadienal, 3-efhyl-4-methypentanol, 5-pentyl-3H-furan-2-one, (E,Z)-2,4-decadienal and 2(3H)-furanone,dihydro-5-pentyl were found to be the major components. The volatile oil exhibited the activities against influenza virus in vitro (IC₅₀s = 64 μg/ml). In in vivo experiment, it prevented influenza virus-induced deaths in a dose-dependent manner.