Two simultaneous mechanisms causing glass transition temperature reductions in high molecular weight freestanding polymer films as measured by transmission ellipsometry

We study the glass transition in confined polymer films and present the first experimental evidence indicating that two separate mechanisms can act simultaneously on the film to propagate enhanced mobility from the free surface into the material. Using transmission ellipsometry, we have measured the thermal expansion of ultrathin, high molecular-weight (MW), freestanding polystyrene films over an extended temperature range. For two different MWs, we observed two distinct reduced glass transition temperatures (T(g)'s), separated by up to 60 K, within single films with thicknesses h less than 70 nm. The lower transition follows the expected MW dependent, linear T(g)(h) behavior previously seen in high MW freestanding films. We also observe a much stronger upper transition with no MW dependence that exhibits the same T(g)(h) dependence as supported and low MW freestanding polymer films.     

An eigenvector‐based linear reconstruction approach for time stepping in discontinuous Galerkin scheme used to solve shallow water equations

Discontinuous Galerkin (DG) methods have shown promising results for solving the two‐dimensional shallow water equations. In this paper, the classical Runge–Kutta (RK) time discretisation is replaced by the eigenvector‐based reconstruction (EVR) that allows the second‐order time accuracy to be achieved within a single time‐stepping procedure. Moreover, the EVRDG approach yields stable solutions near drying and wetting fronts, whereas the classical RKDG approach yields instabilities. The proposed EVRDG technique is compared with the original RKDG approach on various test cases with analytical solutions. The EVRDG solutions are shown to be as accurate as those obtained with the RKDG scheme. Besides, the EVRDG scheme is 1.6 times faster than the RKDG method. Simulating dambreaks involving dry beds confirms that EVRDG scheme gives correct solutions, whereas the RKDG method yields instabilities. Copyright © 2012 John Wiley & Sons, Ltd.     

A Mixed Integer Formulation for Multiple-Route Transit Network Design

We consider the design of multiple transit lines in a network and present a mixed integer formulation for this multiple-route transit network design problem (MRTNDP). With the introduction of node labels, the formulation can exploit the route structure and hence attains efficiency in obtaining a cost minimizing transit network design. This revised version was published online in July 2006 with corrections to the Cover Date.     

High-spin nuclear states and persistent currents in mesoscopic rings

An analogy is presented between periodic persistent currents in mesoscopic rings and staggerings of gamma energy transitions from some nuclear high-spin states. Various sources of damping of the expected periodic structures in both physical systems are compared. This discussion provides, in the nuclear case, a tentative explanation of the scarcity of such staggerings, their appearance near ¹⁵⁰Gd and the existence of a spin-window for their observation. Received: 21 July 1997 / Revised version: 13 October 1997     

Tailoring of carboxyl‐decorated magnetic latex particles using seeded emulsion polymerization

In this research, submicron and carboxyl‐functionalized magnetic latex particles were elaborated by using seeded emulsion polymerization technique in presence of oil‐in‐water (o/w) magnetic emulsion as seed. The polymerization conditions were optimized in order to get well‐defined latex particles with magnetic core and polymer shell bearing carboxylic (–COOH) functionality. Starting from (o/w) magnetic emulsion as seed, synthesis process was performed by copolymerization of styrene (St) monomer with the cross‐linker divinylbenzene (DVB) in presence of 4,4′‐azobis(4‐cyanopentanoic acid) (ACPA) as a carboxyl‐bearing initiator. The prepared magnetic latex particles were first characterized in terms of particle size, chemical composition, morphology, magnetic properties, magnetic content, and colloidal stability using various techniques, e.g. particle size analyzer using dynamic light scattering (DLS) technique, Fourier transform infrared, transmission electron microscopy, vibrating sample magnetometer, thermogravimetric analysis, and zeta potential measurements as a function of pH of the dispersion media, respectively. The prepared magnetic latex particles were then used as second seed for further functionalization with methacrylic acid (MAA) in order to enhance carboxylic groups on the magnetic particle's surface. The results showed that final magnetic latex particles possessed spherical morphology with core‐shell structure and enriched carboxylic acid functionality. More importantly, they exhibited superparamagnetism with high magnetic content (58.42 wt%) and high colloidal stability, which considered as the main requirements for their application in the biomedical diagnostic domains. Copyright © 2017 John Wiley & Sons, Ltd.     

Energy transfer between conjugated polyelectrolytes in layer-by-layer assembled films

We present a study of Fo?rster resonance energy transfer (FRET) between two emissive conjugated polyelectrolytes (CPEs) in layer-by-layer (LbL) self-assembled films as a means of examining their organization and architecture. The two CPEs are a carboxylic acid functionalized polyfluorene (PFl-CO(2)) and thienylene linked poly(phenylene ethynylene) (PPE-Th-CO(2)). The PFl-CO(2) presents a maximum emission at 418 nm, while the PPE-Th-CO(2) has an absorption λ(max) centered at 431 nm, in sufficient proximity for effective FRET. Several LbL films have been constructed using varied concentrations of the deposition solutions and identity of the buffer layers separating the two emissive layers, using a system of either weak polyelectrolytes, poly(allylamine hydrochloride) (PAH)/poly(sodium methacrylate) (PMA), or strong polyelectrolytes, poly(diallylammonium chloride) (PDDA)/poly(styrene sulfonate) sodium (PSS). The efficiency of FRET has been monitored using fluorescence spectroscopy. Initially, the fluorescence of the PFl-CO(2) (E(g) ～ 3.0 eV), which emits at 420 nm, is quenched by the lower band gap PPE-Th-CO(2) (E(g) ～ 2.5 eV). For films using the PAH/PMA system as buffer bilayers and deposited from 1 mM solutions, the PFl-CO(2) fluorescence is progressively recovered as the number of intervening buffer bilayers is increased. Ellipsometry measurements indicate that energy transfer between the two emissive layers is efficient to a distance of ca. 7 nm.     

Electron affinity of Al13: a correlated electronic structure study

Neutral and anionic 13-atom aluminum clusters are studied with high-level, fully ab initio methods: second-order perturbation theory (MP2) and coupled cluster theory with singles, doubles, and perturbative triples (CCSD(T)). Energies and vibrational frequencies are reported for icosahedral and decahedral isomers, and are compared with density functional theory results. At the MP2 level of theory, with all of the basis sets employed, the icosahedral structure is energetically favored over the decahedral structure for both the neutral and anionic Al(13) clusters. Hessian calculations imply that only the icosahedral structures are potential energy minima. The CCSD(T)/aug-cc-pVTZ adiabatic electron affinity of Al(13) is found to be 3.57 eV, in excellent agreement with experiment.     

Rhodium(I)-catalyzed addition of arylboronic acids to (benzyl-/arylsulfonyl)acetonitriles: efficient synthesis of (Z)-β-sulfonylvinylamines and β-keto sulfones

An efficient rhodium(I)-catalyzed addition of arylboronic acids to (benzyl-/arylsulfonyl)acetonitrile is described. Novel β-sulfonylvinylamine products are formed in a stereoselective fashion (Z-alkene). Upon hydrolysis, useful β-keto sulfones are obtained with a broad scope of aryl and sulfonyl substituents.     

Improving Physical Properties via C?H Oxidation: Chemical and Enzymatic Approaches

Physicochemical properties constitute a key factor for the success of a drug candidate. Whereas many strategies to improve the physicochemical properties of small heterocycle‐type leads exist, complex hydrocarbon skeletons are more challenging to derivatize because of the absence of functional groups. A variety of C H oxidation methods have been explored on the betulin skeleton to improve the solubility of this very bioactive, yet poorly water‐soluble, natural product. Capitalizing on the innate reactivity of the molecule, as well as the few molecular handles present on the core, allowed oxidations at different positions across the pentacyclic structure. Enzymatic oxidations afforded several orthogonal oxidations to chemical methods. Solubility measurements showed an enhancement for many of the synthesized compounds.