芴-咔唑新型共聚物/PVK掺杂体系的电致发光特性研究

研究了新型的芴-咔唑共聚物(PFC)与聚乙烯咔唑(PVK)掺杂体系的光致发光和电致发光特性.制备了结构分别为indium-tin-oxide(ITO)/PVK:PFC/bathocuproine(BCP)/tris-(8-hydroxylquinoline)-aluminum (Alq₃) /Mg:Ag，ITO/PFC/BCP/Alq₃/Mg∶Ag和ITO/PVK/BCP/Alq₃/Mg∶Ag的三种有机电致发光器件.对器件的光电特性进行了测试.结果表明，掺杂体系中的PVK有效地抑制了固态膜中PFC激基缔合物的形成.掺杂器件在不同的外加电场作用下发生发光层位置的移动，通过调节外加电场，可以获得从绿光到蓝光的可见光发射.当外加电压大于7V时，掺杂器件的蓝色发光亮度达到1650cd/m²，推测其中可能存在从PVK到PFC的能量传递过程.     

A Novel Way to Prepareγ-A1_2O_3 Supported SO_4~(2-)/ZrO_2 Solid Superacid Catalysts for n-Butane Isomerization

The isomerization of n-butane to isobutane, which is a valuable precursor for theproduction of MTBE and alkylated gasoline, on strong acid catalysts is an importantprocess in refining industry. Solid superacid, especially sulfated zirconia, has highcatalytic activity in n-butane isomerization at comparatively low temperatures andtherefore has attracted more attention of researchers in the past twenty years.' However,from the view point of practice, the activity of SZ needs to be improved fur…     

Complete assignments of 1H and 13C NMR spectroscopic data for three new stigmastane glycosides from Vernonia cumingiana

Three new steroidal saponins, Vernoniosides S1 ( 1 ), Vernoniosides S2 ( 2 ) and Vernoniosides S3 ( 3 ) were isolated from the stem of Vernonia cumingian. Their chemical structures were elucidated on the basis of MS, NMR spectroscopic and chemical analysis. Complete assignment of ¹H and ¹³C NMR spectroscopic data were achieved by 1D and 2D NMR experiments (HMQC, HMBC, ROESY). Copyright © 2008 John Wiley & Sons, Ltd.     

抗磨可靠性寿命的加速试验与预测

在工程实际中，对新机器零件的抗磨可靠性寿命进行评估或预测非常重要，但是，由于磨损是一种受多因素制约的随机过程，目前在实验室广泛采用的模拟磨损试验，不仅周期较长，而且预测误差也比较大。因此，提出了一种在保持磨损机相似的前提下合理选用高ＰＶ值的抗磨可靠性寿命加速试验的新方法。     

Two new eudesmane derivatives from Verbesina virginica

<正>Two new eudesmane derivatives were isolated from the leaves and flowers of Verbesina virginica,along with the known 6-O-β-E -p-coumaroyl-4α-hydroxyeudesmane(1).Their structures were determined as 6-O-β-Z-p-coumaroyl-4α-hydroxyeudesmane(2) and 6-O-α-E-p-coumaroyl-1β-4α-dihydroxyeudesmane(3) by spectroscopic methods.     

Dual-sensitive probe 1-imidazole-2-(5-benzoacridine)-ethanone for the determination of amines in environmental water using HPLC with fluorescence detection and online atmospheric chemical ionization-mass spectrometry identification

Dual-sensitive probe of 1-imidazole-2-(5-benzoacridine)-ethanone (IBAE) for the determination of free amines with fluorescence detection and online highly sensitive atmospheric chemical ionization-mass spectrometry identification (APCI-MS) has been developed. 2-(Benzoacridine)-5-acetic acid (BAAA) reacts with coupling agent N,N′-carbonyldiimidazole (CDI) to form a highly activated amide intermediate 1-imidazole-2-(5-benzoacridine)-ethanone (IBAE), which is dual-sensitive probe. The amide intermediate (IBAE) reacts preferably with amines in dimethylformamide (DMF) solvent to give the high yields of derivatives. IBAE-amine derivatives are not only sensitive to fluorescence but also to MS ionizable efficiency. The percent ionization δ values change from 0 to 57.32% in aqueous acetonitrile and from 0 to 62.14% in aqueous methanol. The relative standard deviations of the peak areas with fluorescence detection for each amine are <1.24% (40 ng/ml, n = 6). The fluorescence detection limits (at a signal-to-noise ratio of 3) are in the range of 0.15-0.50 ng/ml. The online APCI-MS detection limits are in the range of 2.07-8.51 ng/ml (at a signal-to-noise ratio of 3). Therefore, the facile IBAE intermediate derivatization allowed the development of a highly sensitive and specific method for the quantitative analysis of trace levels of amines in environmental water.     

2-(5-Benzoacridine)ethyl-p-toluenesulfonate as sensitive reagent for the determination of bile acids by HPLC with fluorescence detection and online atmospheric chemical ionization-mass spectrometric identification

2-(5-Benzoacridine)ethyl-p-toluenesulfonate (BAETS), a dual-sensitive probe, was reacted with bile acids in the presence of K₂CO₃ catalyst in dimethyl sulfoxide (DMSO) solvent to give BAETS–bile acid derivatives. Derivatives exhibited intense fluorescence (FL) with an excitation maximum at λ _ex 270 nm and an emission maximum at λ _em 510 nm. MS analysis using APCI-MS indicated that derivatives had excellent APCI-MS ionizability with percentage ionization δ values changing from 0 to 88.83% in aqueous acetonitrile and from 0 to 89.15% in aqueous methanol. The collision induced dissociation spectra of m/z [M + H]⁺ contained specific fragment ions at m/z [M + H−H₂O]⁺, [M + H−2H₂O]⁺, [M + H−3H₂O]⁺, 347.3, and 290.1. Repeatability was good for LC separation of BAETS–bile acid derivatives with aqueous acetonitrile as mobile phase. The relative standard deviations (RSDs) of retention time and peak area at 6.6 nmol mL⁻¹ levels with fluorescence detection (FL) were from 0.045 to 0.072% and from 2.16 to 2.73%, respectively. Excellent linear responses were observed, with regression coefficients >0.9995. The FL detection limits (S/N = 3) were in the range of 18.0–36.1 fmol. The online APCI-MS detection limits are in the range of 500–790 fmol (at a signal-to-noise ratio of 3).     

Synthesis and Characterizations of Ferrocenyl Carbonyl Chromium and Cobalt Clusters

Two novel bimetallic complexes, [Cr(CO)₃(η ⁶-C₆H₅)–C≡C–C₆H₄–Fc] (Fc = C₅H₅FeC₅H₄] (1) and [Cr(CO)₃(η ⁶-C₆H₅)–C ≡ C–Fc–C(CH₃)₂–Fc] (3), were synthesized by the Sonogashira coupling reaction. By using of (1) and (3) as ligands to react with Co₂(CO)₈, two others novel polymetallic complexes, [Cr(CO)₃(η ⁶-C₆H₅){Co₂(CO)₆-η ²-μ ²-C≡C–}–C₆H₄–Fc] (2) and [Cr(CO)₃(η ⁶-C₆H₅){Co₂(CO)₆-η ²-μ ²-C≡C–}Fc–C(CH₃)₂–Fc] (4) were obtained. Four carbonyl complexes were characterized by elemental analysis, FT-IR, NMR and MS. The molecular structures of complexes (1), (2) and (4) were determined by single crystal X-ray diffraction. The interactions among the ferrocenyl, Cr(CO)₃ and Co₂(CO)₆-η ²-μ ²-C≡C– units were investigated by cyclic voltammetry.     

New implementations of MRCI in semiempirical frameworks

Multireference configuration interaction with single and double excitations (MRCISD) as well as its analytic CI gradients has been implemented in the semiempirical framework. The hole‐particle symmetry and a mixed driven model for computing coupling coefficients have been used in the new code that allows us to perform MRCI and gradient calculations with higher efficiency and less storage requirements. © 2010 Wiley Periodicals, Inc. J Comput Chem, 2010     

Preparation of solution-based YBCO films with BaSnO3 particles

The YBCO films with BaSnO₃ (BSO) particles were prepared on LAO (0 0 1) substrates by metal organic deposition using trifluoroacetates (TFA-MOD) via introducing SnCl₄ powders into the YBCO precursor solution. It was found that with the increase of the SnCl₄ contents, the slower decomposition and higher temperature for nucleation during the reaction were requested compared to that of pure YBCO film. The YBCO films with different contents of Sn with dense surface and well c-alignment were obtained under optimized heat treatment, and the BaSnO₃ phases were detected by XRD analysis. Litter effect of BSO particles on the T_c and J_c values of YBCO films was found. All YBCO films with BSO particles had T_c values over 90 K and J_c values over 1 MA/cm². A significant enhancement of J_c was observed for YBCO films with BSO particles compared to that of pure YBCO film by the field dependence of J_c values. The best property was obtained for YBCO film with 6 mol.% Sn at 77 K under magnetic field. The results showed that the J_c value of YBCO film with 6 mol.% Sn was enhanced by a factor of 2 in 2 T, and over a factor of 10 beyond 4 T compared to that of pure YBCO film.