Effect of Oxyethylete Units on Adsorption and Micellization Properties of Novel Benzene Sulfonate Surfactants

The surface tension and fluorescence spectra of sodium octyl-[ω-octyloxy-poly(oxyethylene)]-yl-benzene sulfonates (APE_nBS) aqueous solutions have been investigated by Wilhelmy plate method and intrinsic probe methods, respectively to study the effect of EO units on their properties. It was discovered that the surface performance of these surfactants was greatly outstanding: the values of critical micelle concentration (CMC) reached to be of the order of magnitude of 10^?5 mol/L, the values of surface tension at CMC, γ_CMC, were between 25.79 to 31.02 mN/m, and the effectiveness and efficiency of surface tension reduction were excellent. The introduction of oxyethylene units to the surfactant molecule evidently improved the solubility of APE_nBS. With the increase in EO units, the CMC slightly changed after the first decreased. On the other hand, the surface excess concentration at saturation, Γ _max, decreased after the first increased and γ_CMC increased after the first decreased accordingly. The CMC determined by fluorescence spectra of intrinsic probe method were accorded with the CMC measured by surface tension method. The aggregation number N, characterized by quenching the fluorescence spectra with methyl viologen (MV²⁺) as the extrinsic quencher, gradually decreased first (from 0 to1) and then slightly changed (from 1 to 4) with increasing EO chain length. So we concluded that the appropriate number of EO units was the key factor to get the best physicochemical properties of APE_nBS.     

新的α/β水解酶W14和W15的三维结构模建及分子对接研究

利用同源模建和分子动力学模拟方法, 模建了两个新发现的α/β水解酶超家族成员W14和W15的三维结构, 并通过与α-醋酸萘酯的对接研究, 从理论上提出Gly82和Val13为形成“氧洞”的关键残基,有利于稳定水解过程中的带负电的过渡态, 以及其它对复合物形成起到重要作用的氨基酸残基.     

Influence of wavelength,irradiance, and the buffer gas pressure on high irradiance laser ablation and ionization source coupled with an orthogonal Time of Flight Mass Spectrometer

Influence of laser wavelength, laser irradiance and the buffer gas pressure were studied in high irradiance laser ablation and ionization source coupled with an orthogonal time-of-flight mass spectrometer. Collisional cooling effects of energetic plasma ions were proved to vary significantly with the elemental mass number. Effective dissociation of interferential polyatomic ions in the ion source, resulting from collision and from high laser irradiance, was verified. Investigation of relative sensitivity coefficients (RSC) of different elements performed on a steel standard GBW01396, which was ablated at 1064 nm, 532 nm, 355 nm, and 266 nm, has demonstrated that the thermal ablation mechanism could play a critical role with the first three wavelengths, while 266 nm induces non-thermal ablation principally. Experimental results also indicated that there is no evident discrepancy for most metal elements on RSCs and LODs among four wavelengths at high irradiance, except that high boiling point elements like Nb, Mo, and W have higher RSCs at higher irradiance regions of 1064 nm, 532 nm, and 355 nm due to thermal ablation. A geological standard and a garnet stone were also used in the experiment subsequently, and their RSCs and LODs for metal elements show nonsignificant dependence on wavelength at designated irradiances. All results reveal that relatively uniform sensitivity can be achieved at any wavelength for metal elements in the solids used in our experiments at an appropriate irradiance for the low pressure high irradiance laser ablation and ionization source.     

Heat capacity,third-law entropy,and low-temperature physical behavior of bulk hematite (α-Fe2O3)

The constant pressure heat capacity of a bulk hematite powder was measured using a Quantum Design physical properties measurement system (PPMS). The results of two series showed good precision and agreed well with measurements reported by Westrum and Grønvold. The standard molar entropy at T = 298.15 K was calculated to be (87.32 ± 2) J · mol^?1 · K^?1 for Series 1 and (87.27 ± 2) J · mol^?1 · K^?1 for Series 2, which are in good agreement with the value of (87.40 ± 0.2) J · mol^?1 · K^?1 (originally 20.889 cal · deg^?1 · mole^?1) calculated by Westrum and Grønvold. No anomaly was observed for the Morin transition, and theoretical fits below T = 15 K required a ferromagnetic T^3/2 term.     

Synthesis of methyl N-phenyl carbamate from dimethyl carbonate and 1,3-diphenyl urea under mild conditions

Synthesis of methyl N-phenyl carbamate from dimethyl carbonate and 1,3-diphenyl urea was investigated under atmospheric pressure. The results showed that homogenous catalyst sodium methoxide had the excellent activity to efficiently catalyze the synthesis of methyl N-phenyl carbamate under atmospheric pressure.     

A Simple and Versatile Amide Directing Group for C−H Functionalizations

Achieving selective C?H activation at a single and strategic site in the presence of multiple C?H bonds can provide a powerful and generally useful retrosynthetic disconnection. In this context, a directing group serves as a compass to guide the transition metal to C?H bonds by using distance and geometry as powerful recognition parameters to distinguish between proximal and distal C?H bonds. However, the installation and removal of directing groups is a practical drawback. To improve the utility of this approach, one can seek solutions in three directions: 1) Simplifying the directing group, 2) using common functional groups or protecting groups as directing groups, and 3) attaching the directing group to substrates via a transient covalent bond to render the directing group catalytic. This Review describes the rational development of an extremely simple and yet broadly applicable directing group for Pd^II, Rh^III, and Ru^II catalysts, namely the N‐methoxy amide (CONHOMe) moiety. Through collective efforts in the community, a wide range of C?H activation transformations using this type of simple directing group have been developed.     

Hydrogen fluoride adsorption and reaction on the α-Al2O3(0001) surface: a density functional theory study

The adsorption and reaction behaviors of HF on the α-Al(2)O(3)(0001) surface are systematically investigated using density functional theory method. By increasing the number of HF molecules in a p(2 × 1) α-Al(2)O(3)(0001) slab, we find that HF is chemically dissociated at low coverage; while both physical and dissociative adsorption occurs at a 3/2 monolayer (ML) coverage. At the same coverage (1.0 ML), diverse configurations of the dissociated HF are obtained in the p(2 × 1) model; while only one is observed in the p(1 × 1) slab due to its smaller surface area compared with the former one. Preliminary fluorination reaction study suggests that the total energy of two dissociated HF in the p(2 × 1) slab increases by 1.00 and 0.72 eV for the formation and desorption of water intermediate, respectively. The coadsorption behaviors of HF and H(2)O indicate that the pre-adsorbed water is unfavorable for the fluorination of Al(2)O(3), which is well consistent with the experimental results. The calculated density of states show that the peak of σ(H-F) disappears, while the peaks of σ(H-O) and σ(Al-F) are observed at -8.4 and -5 to -3 eV for the dissociated HF. Charge density difference analysis indicates that the dissociated F atom attracts electrons, while no obvious changes on electrons are observed for the surface Al atoms.     

Design,synthesis and biological evaluation of novel 6,7,8,9‐tetrahydro‐2‐(2‐aryloxypyrimidin‐4‐yl)‐2H‐[1,2,4]triazolo[4,3‐a]azepin‐3(5H)‐ones

A series of novel 6,7,8,9‐tetrahydro‐2‐(2‐aryloxypyrimidin‐4‐yl)‐2H‐[1,2,4]triazolo[4,3‐a]azepin‐3(5H)‐ones were designed and efficiently synthesized. Their structures were determined by IR, ¹³C and ¹H NMR, mass spectroscopy, and elemental analysis. These compounds were screened for herbicidal activities against rape and barnyard grass. Compounds 5a‐5f and 5m exhibited moderate herbicidal activity against rape. In addition, the synthesis of the intermediate 1‐(azepan‐2‐ylidene)‐2‐(2‐chloropyrimidin‐4‐yl)‐hydrazine ( 3 ) was studied and the reason for the low yield in the initial procedure is discussed as well.     

TiO2–carbon nanotube heterojunction arrays with a controllable thickness of TiO2 layer and their first application in photocatalysis

TiO₂–carbon nanotube (CNT) heterojunction arrays on Ti substrate were fabricated by a two-step thermal chemical vapor deposition (CVD) method. CNT arrays were first grown on Ti substrate vertically, and then a TiO₂ layer, whose thickness could be controlled by varying the deposition time, was deposited on CNTs. Measured by electrochemical impedance spectroscopy (EIS), the thickness of the TiO₂ layer could affect the photoresponse ability significantly. About 100 nm thickness of the TiO₂ layer proved to be best for efficient charge separation among the tested samples. The optimized TiO₂–CNT heterojunction arrays displayed apparently higher photoresponse capability than that of TiO₂ nanotube arrays which was confirmed by surface photovoltage (SPV) technique based on Kelvin probe and EIS. In the photocatalytic experiments, the kinetic constants of phenol degradation with TiO₂–CNT heterojunctions and TiO₂ nanotubes were 0.75 h⁻¹ (R² = 0.983) and 0.39 h⁻¹ (R² = 0.995), respectively. At the same time, 53.7% of total organic carbon (TOC) was removed with TiO₂–CNT heterojunctions, while the removal of TOC was only 16.7% with TiO₂ nanotubes. These results demonstrate the super capability of the TiO₂–CNT heterojunction arrays in photocatalysis with comparison to TiO₂-only nanomaterial.