Qualitative and quantitative analyses of three bioactive compounds in different parts of Forsythia suspensa by high-performance liquid chromatography-electrospray ionization-mass spectrometry

A high-performance liquid chromatography-electrospray ionization-mass spectrometry (HPLC-ESI-MS) analytical method was developed to simultaneously detect and quantify three main distinctive compounds (forsythiaside, rutin and forsythin) in different parts of Forsythia suspensa (F. suspensa), an herbal medicine. This was the first report on the quantification of bioactive constituents in different parts of F. suspensa by HPLC-ESI-MS analytical method. The calibration curves of the three compounds showed good linearity (R² > 0.9994). The method was reproducible with intra- and inter-day variation less than 1.35% and 2.00%, respectively. The recovery of the assay was in the range of 98.27–101.07%. The results indicated that the developed assay could be considered as a suitable quality control method for this commonly used herbal medicine.     

Inside Cover: Acid-catalyzed Disulfide-mediated Reversible Polymerization for Recyclable Dynamic Covalent Materials (Angew. Chem. Int. Ed. 11/2023)

Poly(1,2-dithiolane)s are a family of intrinsically recyclable polymers due to their dynamic covalent disulfide linkages. Despite the common use of thiolate-initiated anionic ring-opening polymerization (ROP) under basic condition, cationic ROP is still not exploited. Here we report that disulfide bond can act as a proton acceptor, being protonated by acids to form sulfonium cations, which can efficiently initiate the ROP of 1,2-dithiolanes and result in high-molecular-weight (over 1000 kDa) poly(disulfide)s. The reaction can be triggered by adding catalytic amounts of acids and non-coordinating anion salts, and completed in few minutes at room temperature. The acidic conditions allow the applicability for acidic monomers. Importantly, the reaction condition can be under open air without inert protection, enabling the nearly quantitative chemical recycling from bulk materials to original monomers.     

Preparation and characterization of polyaniline/MMT conductive composites

Polyaniline/montmorillonite (PAn/MMT) composite material has been prepared through chemical‐oxidative polymerization by using NH₄S₂O₈ as the oxidant, and it was found that both the composites have inorganic and organic material characteristics and many outstanding performance through the copolymerization coupling of MMT and polyaniline. Infrared spectroscopy (FT‐IR), thermogravimetric analysis (TGA), X‐ray diffraction (XRD), and transmission electron microscopy (TEM) are used to characterize the composition and structures of composite materials, as well as test the conductivity of composite materials through a four‐probe technique. The preparation conditions of PAn/MMT conducting composites are optimized. The optimal conditions have been identified for the reaction time, amount of oxidizer, concentration of HCl, and the amount of MMT. Besides, the results show that when the reaction lasts for 8 hr in the ice bath, the amount of MMT is 0.4 g/5 ml An, the mole ratio of oxidant to aniline is 1, and the concentration of hydrochloric acid is 2 M, the composite had the largest conductivity up to 11.5 S/cm. In addition, we also did an elemental analysis of the composite mechanism of PAn/MMT composites. Copyright © 2008 John Wiley & Sons, Ltd.     

The effect of polymer architecture on the nano self-assemblies based on novel comb-shaped amphiphilic poly(allylamine)

Twelve novel poly(allylamine) (PAA)-based, comb-shaped amphiphilic polymers have been developed. Hydrophobic groups of cetyl, palmitoyl and cholesteryl were randomly grafted to PAA and quaternisation was carried out on some modified polymers. Polymers were characterised using ¹H NMR, elemental analysis and differential scanning calorimetry. All polymers formed nano self-assemblies in the aqueous solution with a positive zeta potential and were able to encapsulate a hydrophobic agent, methyl orange, in the core. The critical aggregation concentration (CAC) and the microviscosity were found to be dependent on the polymer hydrophobicity. Being the most hydrophobic polymer, cholesteryl-grafted PAA had the lowest CAC (0.02 mg mL⁻¹) and the highest microviscosity. They appeared to form dense nanoparticles and were transformed into novel nanostructures in the presence of free cholesterol. Palmitoyl-grafted polymers formed nanoparticles while cetyl-grafted polymers formed polymeric micelles. The flexibility of cetyl chains possibly resulted in the formation of multicore polymeric micelles.     

Microstructural evolution of CeO2 from porous structures to clusters of nanosheet arrays assisted by gas bubbles via electrodeposition

Here we report the preparation of porous CeO2 and clusters of CeO2 nanosheet arrays via a simple, efficient electrochemical approach. Gas bubbles functioning as a dynamic template were utilized in our research for the synthesis of nanosheet array clusters. The Hc and Mr values of porous CeO2 are almost the same as those of CeO2 nanosheet array clusters at 5 K, and they are about 5916 Oe and 8.83 x 10(-4) emu, respectively. However, the saturation magnetization of CeO2 nanosheet array clusters is much larger than that of porous CeO2 structures. The magnetic property of the prepared CeO2 deposits may be caused by the existence of Ce(III), indicating potential interest in the nanodevices because of their electronic and magnetic properties.     

Protein nanotubes comprised of an alternate layer-by-layer assembly using a polycation as an electrostatic glue

We present the synthesis and structure of various protein nanotubes comprised of an alternate layer-by-layer (LbL) assembly using a polycation as an electrostatic glue. The nanotubes were fabricated by sequential LbL depositions of positively charged polycations and negatively charged proteins into a porous polycarbonate (PC) membrane, followed by release of the cylindrical core by quick dissolution of the template with CH(2)Cl(2). This procedure provides a variety of protein nanotubes without interlayer cross-linking. The three-cycle depositions of poly-L-arginine (PLA) and human serum albumin (HSA, M(w)=66.5 kDa) into the porous PC template (pore diameter, D(p)=400 nm) yielded well-defined (PLA/HSA)(3) nanotubes with an outer diameter of 419+/-29 nm and a wall thickness of 46+/-8 nm, revealed by scanning electron microscopy (SEM) and transmission electron microscopy (TEM) observations. The outer diameter of the tubules can be controlled by the pore size of the template (200-800 nm), whereas the wall thickness is always constant, independent of the D(p) value. The (PEI/HSA)(3) (PEI: polyethylenimine) nanotubes showed a slightly thin wall of 39+/-5 nm. CD spectra of the multilayered (PEI/HSA)(n) film on a flat quartz plate suggested that the secondary structure of HSA between the polycations was almost the same as that in aqueous solution. The three-cycle LbL depositions of PLA and ferritin (M(w)=460 kDa) or myoglobin (Mb, M(w)=1.7 kDa) into the porous PC membrane also gave cylindrical hollow structures. The wall thickness of the (PLA/ferritin)(3) and (PLA/Mb)(3) nanotubes were 55+/-5 nm and 31+/-4 nm; it depends on the globular size of the protein (ferritin>HSA>Mb). The individual ferritin molecule was clearly seen in the tubular walls by SEM and TEM measurements.     

New approach to the synthesis of an organopolymolybdate polymer in aqueous media by linkage of multicarboxylic ligands

The reaction of molybdates with multicarboxylic ligands resulted in the crystalline materials of [Na 8(Mo (VI) 10O 32EDTA)(H 2O) 35] n ( 1) and (NH 4) 8 n [Mo (VI) 10O 32PDTA] n (H 2O) 30 n ( 2) (EDTA = 1,2-diaminoethanetetraacetate; PDTA = 1,3-diaminopropanetetraacetate). In the two compounds, decamolybdate clusters are covalently linked by multicarboxylic ligands to form unusual meso-helical chains. For the first time, the synthesis of an organopolyoxometalate polymer is realized in aqueous media, which opens a green chemical approach to the fabrication of polyoxometalate-based polymers. The photochromic properties of 1 in the poly(vinyl alcohol) film displayed reddish-brown coloration upon UV irradiation, providing a new coloration material for photochromic films.     

Rapid separation and binding configuration prediction of the components in Danshen decoction to endothelin A receptor using affinity chromatography and molecular dynamics simulation

As a famous traditional Chinese formula, Danshen Decoction has the potential to relieve the pain of pulmonary arterial hypertension patients, however, the functional components remain unknown. Herein, we reported a method to screen the functional components in Danshen Decoction targeting endothelin receptor A, an accepted target for the treatment of the disease. The receptor was functionalized on the macroporous silica gel through an epidermal growth factor receptor fusion tag and its covalent inhibitor. Using the affinity gel as the stationary phase, the bioactive compound was identified as salvianolic acid B by mass spectrometry. The binding kinetic parameter (dissociation rate constants k_d) of salvianolic acid B with the receptor was determined via peak profiling. Using the specific ligands of the receptor as probes, the binding configuration prediction of salvianolic acid B with the receptor was performed by molecular dynamics simulation. Our results indicated that salvianolic acid B is a potential bioactive compound in Danshen Decoction targeting the receptor. This work showed that receptor chromatography in combination with molecular dynamics simulation is applicable to predicting the binding kinetics and configuration of a ligand to a receptor, providing crucial insight for the rational design of drugs that recognize functional proteins.     

Mechanistic insights into regioselective polymerization of 1,3‐Dienes catalyzed by a bipyridine‐ligated iron complex: A DFT study

The regioselective polymerizations of isoprene and 3‐methyl‐pentadiene catalyzed by a cationic iron (II) complex bearing bipyridine ligand have been computationally studied. Having achieved an agreement between calculation and experiment, it is found that the open‐shell unpaired 3d‐electrons localize on Fe center rather than partially distribute on the redox‐active bipyridine ligand. The steric effect plays a more important role in controlling the regioselectivity in comparison with electronic factors. The deformation energy is mainly contributed by monomer and Fe‐alkyl moieties rather than the bipyridine ligands themselves, although noncyclopentadienyl ancillary ligands are often deformed in most insertion transition states for selective polymerization of olefin. © 2016 Wiley Periodicals, Inc.     

Highly Efficient Ultrasonic‐Assisted CuCl‐Catalyzed 1,3‐Dipolar Cycloaddition Reactions in Water: Synthesis of Coumarin Derivatives Linked with 1,2,3‐Triazole Moiety

By introducing ultrasound irradiation into “on water” CuCl‐catalyzed 1,3‐dipolar Huisgen cycloaddition, the reaction efficiencies were notably promoted toward a wide variety of applicable azides and alkynes at room temperature, and a series of coumarin derivatives linked with 1,2,3‐triazole moiety were synthesized using the optimized conditions.