Thermoelectric properties and electronic structure of Al-doped ZnO

Impure ZnO materials are of great interest for high temperature thermoelectric application. In this work, we present the effects of Al-doping on the thermoelectric properties and electronic structures of a ZnO system. We find that, with increasing Al concentrations, the electrical conductivity increases and the thermal conductivity decreases significantly, whereas, the Seebeck coefficient decreases slightly. Nevertheless, the figure of merit (ZT) increases owing to high electrical conductivity and low thermal conductivity. On the other hand, the electronic band structures show that the position of the Fermi level is moved upwards and the bands split near the valence-band top and conduction-band bottom. This is due to the interaction between the Al3p and Zn4s orbitals, which drive the system towards semimetal. Besides, the Density Of States (DOS) analysis shows that the introduction of Al atom obviously reduces the slope d(DOS)/dE near the Fermi level. Based on the calculated band structures, we are able to explain qualitatively the measured transport properties of the Al-doped ZnO system.     

Luminescent properties of La2LiTaO6:Mn4+ and its application as red emission LEDs phosphor

A novel phosphor, Mn⁴⁺ doped La₂LiTaO₆, was developed by solid-state reaction method. The luminescent spectra and emission efficiencies of La₂LiTaO₆:Mn _x ⁴⁺ (x = 0.001, 0.003, 0.005 and 0.01) were discussed. The effects of co-doped charge compensation ions, M = Mg²⁺, Ca²⁺, Na⁺, were investigated, respectively. The excitation spectra indicated that La₂LiTaO₆:Mn⁴⁺ could be effectively excited by both NUV light and blue light. The emission spectra of the phosphor exhibit a broadband ranging from 670 to 720 nm with the maximum at about 709 nm in deep red region. The co-doping of Mg²⁺ could significantly improve the luminescent properties of La₂LiTaO₆:Mn⁴⁺. Thus, phosphor La₂LiTaO₆:Mn⁴⁺, Mg²⁺ can serve as a key component to improve color rendering of blue-chip white-LEDs.     

Quantum confinement in graphene quantum dots

By performing density functional theory calculations, we studied the quantum confinement in charged graphene quantum dots (GQDs), which is found to be clearly edge and shape dependent. It is found that the excess charges have a large distribution at the edges of the GQD. The resulting energy spectrum shift is very nonuniform and hence the Coulomb diamonds in the charge stability diagram vary irregularly, in good agreement with the observed nonperiodic Coulomb blockade oscillation. We also illustrate that the level statistics of the GQDs can be described by a Gaussian distribution, as predicted for chaotic Dirac billiards.

     

荧光法研究左氧氟沙星与人血清白蛋白作用机理及含量测定

利用荧光及紫外光谱法研究了水溶液体系中左氧氟沙星(LVFX)与人血清白蛋白(HSA)的相互作用机制。结果表明左氧氟沙星对人血清白蛋白的荧光有较强的猝灭作用,其猝灭类型主要为静态猝灭。在不同温度下求得了左氧氟沙星与人血清白蛋白的结合常数k,发现随反应温度上升k值下降。由热力学参数,确定了左氧氟沙星与人血清白蛋白的结合作用主要为色散力。用同步荧光技术考察了左氧氟沙星对人血清白蛋白构象的影响,又根据Foerster理论,测得了左氧氟沙星与人血清白蛋白结合的能量转移效率,相互结合距离。进一步证明了该反应是单一静态猝灭过程,阐述了其猝灭机理是通过能量转移产生的。研究发现人血清白蛋白荧光猝灭程度的对数与左氧氟沙星含量有良好的线性关系,25℃时线性范围为:2.0×10-6—2.4×10-5mol·L-1,检出限为1.2×10-7mol·L-1。用于片剂中左氧氟沙星含量的测定结果满意,相对标准偏差为:1.5%—2.1%,回收率为:94.8%—97.7%。     

High order harmonic generation by non-linear reflection of a pedestal-free intense laser pulse on a plasma

We demonstrate the influence of the prepulses and ASE of ultrashort pulses interacting with a solid target by addressing the direct comparison of the harmonic spectra generated by reflection onto a solid target with and without the introduction of a plasma mirror system. Harmonics up to the 20th of the fundamental of the Ti-Sa laser are clearly visible in a situation free from any plasma expansion. PACS 42.65. Ky; 52.38.-r; 52.38.Ph; 52.50.Jm     

Parity-violating electron deuteron scattering and the proton's neutral weak axial vector form factor

We report on a new measurement of the parity-violating asymmetry in quasielastic electron scattering from the deuteron at backward angles at Q2=0.038 (GeV/c)2. This quantity provides a determination of the neutral weak axial vector form factor of the nucleon, which can potentially receive large electroweak corrections. The measured asymmetry A=-3.51+/-0.57 (stat)+/-0.58 (syst) ppm is consistent with theoretical predictions. We also report on updated results of the previous experiment at Q2=0.091 (GeV/c)2, which are also consistent with theoretical predictions.     

Film forming kinetics and reaction mechanism of γ-glycidoxypropyltrimethoxysilane on low carbon steel surfaces

The film forming kinetics and reaction mechanism of γ-GPS on low carbon steel surfaces was investigated by FTIR-ATR, AFM, NSS and theoretical calculation method. The results from experimental section indicated that the reaction of γ-GPS on low carbon steel surfaces followed the conventional reaction mechanism, which can be described as reaction (I) (Me (Metal)-OH + HO-Si → Me-O-Si + H₂O) and reaction (II) (Si-OH + Si-OH → Si-O-Si + H₂O). During film forming process, the formation of Si-O-Fe bond (reaction (I)) exhibited oscillatory phenomenon, the condensation degree of silanol monomers (reaction (II)) increased continuously. The metal hydroxyl density had significant influence on the growth mechanisms and corrosion resisting property of γ-GPS films. The results from theoretical calculation section indicated that the patterns of reaction (I) and reaction (II) were similar, involving a nucleophilic attack on the silicon center. The formation of Si-O-Fe bond (reaction (I)) was kinetically and thermodynamically preferred, which had catalytic effect on its condensation with neighboring silanol monomers (reaction (II)). Our DFT calculations were good consistent with the experimental measurements.     

Fiber Sagnac π-shifted interferometer for a polarization-independent PMNT high-speed electro-optic switch

We propose and analyze experimentally a high-speed polarization-independent lead magnesium niobate titanate (PMNT) electro-optic switch using a π-shifted fiber Sagnac interferometer (FSI). In the proposed switch, the PMNT high-speed electro-optic ceramic is used as a phase retarder for two counterpropagating waves, which can switch the energy between the reflection and transmission ports of the FSI. Because of an initial π shift introduced into the FSI by actively adjusting the polarization controller, the power response of the switch is independent of the polarization orientation of the incident light, which induces the polarization-independent characteristic of the switch. An optical switch with cross talk lower than -25 dB and a switching time of less than 200 ns is experimentally investigated. The insertion loss and electric hysteresis property are also demonstrated. Finally, a scheme to form the n × n switch matrix is proposed.     

氢化物原子荧光光谱法测定土壤中砷的不确定度评定

本文介绍了氢化物原子荧光光谱法测定土壤中砷的不确定度评定方法,分析和识别测定过程中不确定度的来源,归纳提出了影响土壤中砷含量测定不确定度的主要因素.通过不确定度评定证明不确定度分量的主要来源为样品制备过程所带来的不确定度,其中,消解样品所引入的不确定度贡献最大;根据最小二乘法拟合校准曲线计算的标准不确定度次之,而标准储备液校准稀释以及重复性实验所带来的不确定度相对于前两者小很多.     

Investigation on laser brazing AA6056 Al alloy to XC18 low-carbon steel

Based on the studies of influence of YAG laser heating conditions for Al alloy melt and steel on wettability,the mechanics of the laser overlap braze welding of 6056 Al and XC18 steel sheet has been investigated.Under the temperature range which is above the melting point of the Al alloy and below the melting point of the steel, two dissimilar metals can be joined by means of laser braze welding. There is no crack observed in the joining area, i.e. Al-Fe intermetallic phase (Fe3Al/FeAl/FeAl3/Fe2Al5) layer formed by solution and diffusion between liquid-solid interface. The temperature range can be defined as the process temperatures of laser braze welding of Al-Fe materials. Selecting a higher laser heating temperature can improve the wettability of Al melt to steel surface, but the intermetallic phase layer is also thicker. When the laser heating temperature is so high that the joining surface of steel is melted, there is a crack trend in the joining area.