不同类型细胞穿膜肽二级结构特征研究

细胞穿膜肽是一类能以受体依赖或非受体依赖方式介导胞吞作用的小分子短肽,能够携带不同分子穿过细胞膜,这一特性使细胞穿膜肽成为一种有效的运输载体,为药物靶向治疗提供了新希望.本文从生物信息角度针对不同长度区间、运输不同类型分子细胞穿膜肽之间的异同二级结构特征进行了系统研究,同时进一步对不同穿膜方式对应的细胞穿膜肽二级结构特征进行了对比研究,结果表明不同类型细胞穿膜肽之间在二级结构组成上具有不同程度差异特征,为今后揭示细胞穿膜肽相关分子结构机制奠定可靠的理论基础.     

3d过渡金属掺杂M_2@Si_(20)(M=Sc-Zn)团簇的密度泛函理论研究

利用密度泛函理论(DFT)研究3d过渡金属掺杂硅团簇的几何结构和稳定性,计算了绝热电子亲和能和垂直电离能,内嵌双金属间距,自旋磁矩等.结果表明内嵌的Sc、Ti、V、Mn金属二聚体和十二面体硅笼构成了稳定的富勒烯结构,随着d电子数目的增加其内嵌的富勒烯构型有部分畸变,总体而言Si_(20)团簇掺杂双金属后稳定性得到了提高.     

多波长激光探测微小摄像头机理研究北大核心CSCD

基于激光不同波段的探测传输特点,通过分析典型微小摄像头的回波传输特性,提出了一种针对多波长激光特征检测微小摄像头的研究方案。利用几何光学和波动光学理论,分析微小摄像头结构及其反射光谱特征,计算并仿真了一定探测距离下的回波光场,在此基础上搭建多波长激光检测系统。实验结果表明,在一定的景深范围内,具有红外截止滤光片的微小摄像头对可见光的回波光斑衍射环特征明显、条纹对比度高且可探测距离远;近红外波段的目标回波功率低、后向散射干扰严重,可探测距离近;短波红外波段几乎不受红外截止滤光片影响,且1550 nm处于人眼安全波段。实验结果与数值分析、理论仿真结果一致,验证了短波红外激光用于探测微小摄像头的可行性。     

反应磁控溅射制备TiO2和Nb2O5混合光学薄膜

利用反应磁控溅射技术在BK-7基片上制备了二氧化钛和五氧化二铌均匀混合的光学薄膜.薄膜的内部微结构、表面形貌、化学成分比例以及光学性质等用X射线衍射、高分辨扫描电子显微镜、原子力显微镜、X射线光电子能谱和紫外可见近红外分光光度计进行研究;发现制备的薄膜为非晶结构,薄膜的表面平整、内部结构致密,不存在柱状结构或结晶颗粒的缺陷,TiO2与Nb2O5的成分比例大致是1∶1.54.从光学透射光谱计算的折射率和消光系数显示,在550 nm波长处的折射率为2.34,消光系数为2.0×10－4.结果表明制备的薄膜是TiO2和Nb2O5均匀混合的高质量光学薄膜.     

锥形光纤中光波传输特性的蒙特卡罗模拟

为了分析锥形光纤中光子流的传输特性和空间分布特性,采用了蒙特卡罗算法对其进行了模拟仿真,得到了大量光子经过锥形光纤后的光子分布图.模拟实验结果表明,通过锥形光纤的大量光子集中在探测器中心,到达探测器某一位置的光子数随着该位置到探测器中心距离的增加而减少,并且在锥形光纤锥度比一定的条件下,改变锥形光纤长度,光强度随着长度的增加而下降,但通过锥形光纤的光子分布是一样的.这些研究结果对锥形光纤的设计和实际应用提供了重要依据.     

Theoretical description of improving measurement accuracy for incoherence Mie Doppler wind lidar

For the nonlinearity of Fabry-Perot interferometer(FPI) transmission spectrum,the measurement uncertainty of incoherent Mie Doppler wind lidar based on it increases evidently with the increase of backscattering signal Doppler shift.A method of repeating the use of the approximate linear part of FPI transmission spectra for reducing the high uncertainty of a big Doppler shift is proposed.One of the ways of realizing this method is discussed in detail,in which the characteristics of FPI transmission spectrum changing with thickness and incident angle are utilized simultaneously.Under different atmosphere conditions,it has been proved theoretically that the range of measurement uncertainty drops to one-sixth while its minimum has no serious change.This method can be used not only to guide the new system design,but also as a new working way for the fabricated system.     

Measurement of thermal rise-time of a laser diode based on spectrally resolved waveforms

Thermal resistance and thermal rise-time are two basic parameters that affect most of the performances of a laser diode greatly. By measuring waveforms received after a spectroscope at wavelengths varied step-by-step, the spectrally resolved waveforms can be converted to calculate the thermal rise-time. Basic formulas for the spectrum variation of a laser diode and the measurement set-up by using a Boxcar are described in the paper. As an example, the thermal rise-time of a p-side up packaged short-pulse laser diode was measured by the method to be 390 μs. The method will be useful in characterizing diode lasers and LD modules in high-power applications.     

碳纳米管锁模双包层光纤激光器的实验研究

本文采用双包层掺镱光纤作为增益介质,用单壁碳纳米管作为饱和吸收体,获得最高输出功率为336 mW的锁模脉冲激光.用飞秒激光诱导水击穿法直接在单模光纤上制备出D形区,通过在D形光纤上滴涂单壁碳纳米管溶液,成功制备出碳纳米管饱和吸收体,并对其饱和吸收特性进行测试,发现其调制深度为27％.利用该饱和吸收体作为锁模器件,制备出具有环形腔结构的锁模光纤激光器.当抽运功率为4W时,获得了脉宽为93.8 fs,中心波长为1083.8 nm,3 dB谱宽为8.6 nm,重复频率为5.59 MHz,平均功率为336 mW的飞秒脉冲激光输出.     

Q波段宽频带线性化器设计

当前我国Q/V频段的低轨卫星互联网项目正在大力开展,宽带通信正在逐步发展。而国内相关线性化技术一般局限于较窄频带,相关研究尚不成熟。因此尽快研究设计宽频带线性化器十分有必要。采用适用于空间环境的模拟预失真技术,设计出针对卫星通信所用的行波管功率放大器（TWTA）的Q波段线性化器。其利用新型微带传输结构,结合肖特基二极管,可在毫米波频段实现超宽瞬时频带的线性化。在38～43 GHz（5 GHz）的瞬时频带内对TWTA的幅度失真以及相位失真有着很好的改善。线性化器在输入功率为−17～13 dBm的范围内,频带内幅度增益约为4.8～7.2 dB,相位扩张约为70°～88°。相对其他同类型线性化器,此线性化器对应频率较高,且可在很宽的瞬时频带内对TWTA实现比较稳定的线性化。     

Synthesis and Rearrangement of P‐Nitroxyl‐Substituted PIII and PV Phosphanes: A Combined Experimental and Theoretical Case Study

Low‐temperature generation of P‐nitroxyl phosphane 2 (Ph₂POTEMP), which was obtained by the reaction of Ph₂PH ( 1 ) with two equivalents of TEMPO, is presented. Upon warming, phosphane 2 decomposed to give P‐nitroxyl phosphane P‐oxide 3 (Ph₂P(O)OTEMP) as one of the final products. This facile synthetic protocol also enabled access to P‐sulfide and P‐borane derivatives 7 and 13 , respectively, by using Ph₂P(S)H ( 6 ) or Ph₂P(BH₃)H ( 11 ) and TEMPO. Phosphane sulfide 7 revealed a rearrangement to phosphane oxide 8 (Ph₂P(O)STEMP) in CDCl₃ at ambient temperature, whereas in THF, thermal decomposition of sulfide 7 yielded salt 10 ([TEMP‐H₂][Ph₂P(S)O]). As well as EPR and detailed NMR kinetic studies, indepth theoretical studies provided an insight into the reaction pathways and spin‐density distributions of the reactive intermediates.