三氟丙基修饰的有机-无机杂化二氧化硅膜制备、氢气分离及水热稳定性能

以三氟丙基三甲氧基硅烷(TFPTMS)和1,2-双(三乙氧基硅基)乙烷(BTESE)为前驱体, 通过溶胶-凝胶法在酸性条件下制备三氟丙基修饰的有机-无机杂化SiO₂膜材料, 并深入研究三氟丙基修饰对溶胶粒径和疏水性能的影响以及膜材料的氢气渗透分离性能和长期水热稳定性. 结果表明三氟丙基已成功修饰到有机-无机杂化SiO₂膜材料中, 且随着TFPTMS修饰量的增加, 溶胶粒径有减小趋势, 膜材料的疏水性能逐渐提高. 当n(TFPTMS)/n(BTESE)＝0.6时, 溶胶平均粒径为2.11 nm, 膜材料对水的接触角达到111.6°±0.7°. H₂在修饰后膜材料中的输运主要遵循微孔扩散机理, 300 ℃时H₂的渗透率为8.86×10^-7 mol·m^-2·s^-1·Pa^-1, H₂/CO₂的理想分离系数达到5.4, 且当进气摩尔比例为1∶1时H₂/CO₂的双组分气体分离系数达到了4.82, 均高于Knudsen扩散分离因子(H₂/CO₂＝4.69), 膜材料呈现出良好的分子筛分性能. 膜材料在250 ℃及水蒸气摩尔含量为5%的水热环境中能稳定工作300 h以上.     

沉淀剂用量对反萃取产物结构、形貌及热分析结果的影响

研究了相同浓度不同用量的沉淀剂草酸从负载铈的有机相中反萃取沉淀。利用X射线衍射(XRD)、扫描电子显微镜(SEM)、红外分析(FTIR)及热重-差热分析仪(TG-DSC)等手段,对反萃所得铈沉淀产物的物相、形貌、红外谱图和热失重等进行了分析。结果表明:随着沉淀剂草酸用量从90%增大到150%,萃取产物的晶型逐渐完整,但只有草酸用量为130%时,沉淀产物呈现为典型的水合草酸铈,其他沉淀剂用量经验证均未得到确定的化合物;草酸用量从90%增大到150%时产物的形貌从不规则的块状逐渐变为较为均匀的片状,且草酸用量越大,片状产物的尺度越大;热重分析表明萃合物的失重率较大,考虑是萃合物中含有大量的有机物所致。     

陕南茶叶稀土元素产地特征研究

为了掌握陕南茶叶中稀土元素含量和分布状况,并利用稀土元素对茶叶产地进行判别,采用ICP-MS法对陕南地区44个茶叶样品中16种稀土元素进行了测定。结果表明:茶叶中不同稀土元素含量差异较大,其中La,Ce,Nd含量较高,平均含量分别为124.81,172.13,87.20μg·kg-1;茶叶样品中稀土氧化物含量范围为200.32~1558.35μg·kg-1,总体上呈东高西低趋势,且均低于国家规定限量;茶叶中稀土元素随地域变化表现出不同分布特征,但具有相似的丰度模式;利用主成分分析将茶叶稀土元素归结为轻稀土组和重稀土组,间接地证明轻稀土元素和重稀土元素在从土壤到茶叶迁移过程中仍存在着差异;聚类分析结果表明,稀土元素可作为陕南茶叶产地判别的重要指标。     

亚微米级Cu0/Fe3O4复合物多相催化过一硫酸盐降解有机污染物

过一硫酸盐催化活化技术因其可产生强氧化性活性氧化物种,可快速氧化降解并矿化有机污染物的优异性能而备受关注.本文成功制备了亚微米级Cu0/Fe3O4复合物,发现其能多相催化过一硫酸盐产生单线态氧降解有机污染物.首先,以CuCl2·2H2O,FeCl2·4H2O和FeCl3·6H2O为铜源和铁源,水合肼为还原剂,采用水热法在180oC反应24 h制备了亚微米级磁性Cu0/Fe3O4复合物.表征结果显示,所制材料为Cu0和Fe3O4的复合物,颗粒大小约为220 nm;单一相Cu0和Fe3O4晶体粒径分别为33.8和106.2 nm,而Cu0/Fe3O4复合物中Cu0和Fe3O4晶体粒径分别减为20.8和31.9 nm.这表明Cu0和Fe3O4复合降低了Cu0和Fe3O4晶体粒径,有利于Cu0和Fe3O4的分散.BET测试结果表明,Cu0/Fe3O4复合物比表面积为4.6 m2/g,与Cu0颗粒的(4.2 m2/g)相当,但远小于Fe3O4的(15.6 m2/g).制备的Cu0/Fe3O4复合物可有效催化过一硫酸盐产生单线态氧降解罗丹明B、亚甲基蓝、金橙II、苯酚和对氯酚.当Cu0/Fe3O4复合物的用量为0.1 g/L,过一硫酸盐浓度为0.5 mmol/L和初始pH为7时,Cu0/Fe3O4复合物可在30 min内完全降解20μmol/L的罗丹明B、亚甲基蓝、金橙II以及0.1 mmol/L的苯酚和对氯酚.对比试验显示,在相同条件下,Cu0和Fe3O4颗粒分别可以降解28%和20%的罗丹明B.这表明Cu0/Fe3O4复合物中的Cu0和Fe3O4晶体在催化过一硫酸盐降解污染物的反应中具有协同作用,这主要来源于Cu0/Fe3O4复合物中Cu0和Fe3O4的晶体粒径变小和更好的分散.采用分光光度法测定了降解反应液中铜和铁离子的溶出量.当Cu0/Fe3O4复合物的用量为0.1 g/L,过一硫酸盐浓度为0.5 mmol/L和初始pH为7时,反应60 min后,降解液中铜和铁离子的浓度分别为0.22和0.1 mg/L,仅占复合物中总铜和总铁量的1.1%和0.2%,表明Cu0/Fe3O4复合物具有较强的化学稳定性.所制Cu0/Fe3O4复合物具有超顺磁性,借助磁场实现快速分离回收,可循环利用五次,表明其优越的催化稳定性.通过加入乙醇和叠氮化钠,考察了Cu0/Fe3O4复合物催化活化过一硫酸盐体系中的活性氧化物种.发现100 mmol/L乙醇的加入对污染物的降解无明显影响,而加入同等量的叠氮化钠可完全抑制污染物的降解,表明Cu0/Fe3O4复合物催化活化过一硫酸盐产生的主要活性氧物种为单线态氧.采用电子顺磁共振谱进一步证实了单线态氧的生成.基于以上研究,Cu0/Fe3O4复合物催化活化过一硫酸盐的机理为Cu0/Fe3O4作为一个电子媒介加速过一硫酸盐和污染物之间的电子转移,从而导致污染物被快速降解.该反应机理不同于常见的金属催化过一硫酸盐产生硫酸根和羟自由基的反应机理.我们推测,电导性优良的Cu0在此催化反应中起着关键性作用.本催化方法可作为一种绿色的氧化技术用于环境污染物的氧化降解处理.     

Viscometric study of poly(vinyl chloride)/poly(vinyl acetate) blends in various solvents

The intermolecular interactions between poly(vinyl chloride) (PVC) and poly(vinyl acetate) (PVAc) in tetrahydrofuran (THF), methyl ethyl ketone (MEK) and N,N^′-dimethylformamide (DMF) were thoroughly investigated by the viscosity measurement. It has been found that the solvent selected has a great influence upon the polymer-polymer interactions in solution. If using PVAc and THF, or PVAc and DMF to form polymer solvent, the intrinsic viscosity of PVC in polymer solvent of (PVAc+THF) or (PVAc+DMF) is less than in corresponding pure solvent of THF or DMF. On the contrary, if using PVAc and MEK to form polymer solvent, the intrinsic viscosity of PVC in polymer solvent of (PVAc+MEK) is larger than in pure solvent of MEK. The influence of solvent upon the polymer-polymer interactions also comes from the interaction parameter term Δb, developed from modified Krigbaum and Wall theory. If PVC/PVAc blends with the weight ratio of 1/1 was dissolved in THF or DMF, Δb<0. On the contrary, if PVC/PVAc blends with the same weight ratio was dissolved in MEK, Δb>0. These experimental results show that the compatibility of PVC/PVAc blends is greatly associated with the solvent from which polymer mixtures were cast. The agreement of these results with differential scanning calorimetry measurements of PVC/PVAc blends casting from different solvents is good.     

Self-assembled nanoparticle probes for recognition and detection of biomolecules

Colloidal gold nanocrystals have been used to develop a new class of nanobiosensors that is able to recognize and detect specific DNA sequences and single-base mutations in a homogeneous format. At the core of this biosensor is a 2.5-nm gold nanoparticle that functions as both a nano-scaffold and a nano-quencher (efficient energy acceptor). Attached to this core are oligonucleotide molecules labeled with a thiol group at one end and a fluorophore at the other. This hybrid bio/inorganic construct is found to spontaneously assemble into a constrained arch-like conformation on the particle surface. Binding of target molecules results in a conformational change, which restores the fluorescence of the quenched fluorophore. Unlike conventional molecular beacons with a stem-and-loop structure, the nanoparticle probes do not require a stem, and their background fluorescence increases little with temperature. In comparison with the organic quencher Dabcyl (4,4'-dimethylaminophenyl azo benzoic acid), metal nanoparticles have unique structural and optical properties for new applications in biosensing and molecular engineering.     

Structure and dynamics of solutions of a polystyrene–polybutadiene pentablock copolymer in a styrene‐selective solvent

We have examined solutions of a polystyrene–polybutadiene pentablock copolymer in 1,4‐dioxane, a slightly selective solvent for polystyrene and a θ solvent for polybutadiene, with static light scattering (SLS), dynamic light scattering (DLS), and small‐angle neutron scattering (SANS). The SANS data have been analyzed with the Percus–Yevick model to represent the scattering from interacting cores, approximated as hard spheres, and with a Lorentzian function to represent the scattering from unassociated and associated polymer chains. The SANS data at 25 °C clearly reveal interacting domains, approximately 6 nm in radius, formed by the association of the insoluble polybutadiene block in the 20% sample. The 4% sample does not show such domains, whereas the 7% sample represents an intermediate situation, with both unassociated polymer and associated polymer. At higher temperatures, the domains dissolve. The DLS data for samples with concentrations of 2–22% show two diffusive modes: a fast mode corresponding to the cooperative dynamics of concentration fluctuations and a slow mode corresponding to the diffusion of clusters. The large length‐scale heterogeneities, indicated by the strong angular dependence of SLS, implies that the small microdomains of about 10–15 polybutadiene blocks are bridged by the polystyrene chains, forming large aggregates with randomly distributed crosslinks on length scales much larger than the domain size. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2807–2816, 2002     

Vortex-lattice melting in magnesium diboride in terms of the elastic theory

In the framework of elastic theory, we study the vortex-lattice melting transitions in magnesium diboride for magnetic fields both parallel and perpendicular to the anisotropy axis. Using the parameters from experiments, the vortex-lattice melting lines in the H-T diagram are located systematically by various groups of Lindemann numbers. It is observed that the theoretical result for the vortex melting with parallel and perpendicular fields agrees well with the experimental data. Therefore, it is suggested that the phenomenological elastic theory is universal to various type-II superconductors, including two- and multi-band superconductors.     

Synthesis of SnO_2 nanorods from aqueous solution:The effect of preparation conditions on the formed patterns

<正>SnO_2 nanorods were deposited on the Si substrates in an aqueous solution containing both SnCl_4 and CO(NH_2)_2.It is found that different self-assembled patterns of SnO_2 nanorods can be obtained by changing the deposition conditions such as the molar ratio of CO(NH_2)_2 to SnCl_4 and the pretreatment of the substrate.Scattered SnO_2 nanorods,for example,can be changed into flower-like patterns when the molar ratio of CO(NH_2)_2 to SnCl_4 is raised,and well-aligned nanorod arrays can be formed when the pretreatment of the substrate is changed.In addition,some interesting patterns,e.g.tree-like patterns,can also be observed.