Determination of tyrosine traces by adsorption voltammetry of its copper (II) complex

The electrochemical behavior of the copper-tyrosine complex has been studied by linear-sweep adsorption voltammetry. In 0.02 mol/L Na₂HPO₄ buffer solution (pH=9.6), the complex can be adsorped on a hanging mercury drop electrode and reduced at a peak potential of about –0.42 V (vs. SCE). The secondary derivative peak height is linear proportional to the concentration of tyrosine in the range 1.0×10^–7–5.0×10^–5 mol/L. The detection limit is 5×10^–8 mol/L.Project supported by the Provincial Science Foundation of Shandong Province     

Ba（n，x）~（134）Cs，~（134）Ba（n，2n）~（133）Ba，

用中子活化法相对于５４Ｆｅ（ｎ，Ｐ）５４Ｍｎ反应，在１３．５０—１４．８０ＭｅＶ中子能区测量了Ｂａ（ｎ，ｘ）１３４Ｃｓ，１３４Ｂａ（ｎ，２ｎ）１３３Ｂａ，１４０Ｃｅ（ｎ，２ｎ）１３９Ｃｅ，１４２Ｃｅ（ｎ，２ｎ）１４１Ｃｅ和２３Ｎａ（ｎ，２ｎ）２２Ｎａ的反应截面．并将所测的结果和其他作者的结果进行了比较，中子能量是用９０Ｚｒ（ｎ，２ｎ）８９ｍ＋ｇＺｒ反应和９３Ｎｂ（ｎ，２ｎ）９２ｍＮｂ反应截面比法测定的。     

The Geometric Construction of WZW Effective Action in Noncommutative Manifold

By constructing close-one-cochain density Ω^12n in the gauge group space we get the Wess-Zumino-Witten (WZW) effective Lagrangian on high-dimensional noncommutative space.Especially consistent anomalies derived from this WZW effective action in noncommutative four-dimensional space coincide with those obtained by L.Bonora etc.(het-th/0002210).     

F／Cl比与Eu~（2＋）：BaFCl中F色心的浓度和光激励截面的关系

研究了Ｅｕ（２＋）：ＢａＦｘＣｌ２在紫外线辐照下的光激励发光。通过改变激励方式及激励光的扫描方向，给出了Ｅｕ（２＋）：ＢａＦｘＣｌ２－ｘ光激励发光过程中，两种Ｆ色心的浓度比值与光激励截面比值的测定方法。利用这种测定方法，进一步研究了两种Ｆ色心的浓度比值和光激励截面比值与Ｆ／ＣＩ比值的关系。     

自相似结构壳模型

为了扩展以简谐振子为基矢的常规壳模型（ＳＭ）计算到晕核，提出了自相似结构壳模型（ＳＳＭ）．通过对简谐振子动能项和势能项的重度规以及单粒子平均场模拟，可以得到ＳＳＭ中的单粒子轨道有态相关的圆频率，在ＳＳＭ中，晕核大的均方根半径、厚的中子皮以及Ｂｏｒｒｏｍｅａｎ晕核和的束缚态性质能够再现出来。     

谐振子薛定谔方程的简单解法

物质的许多物理与化学性质都可以用线性谐振子模型解释，本文用简单的数学运算求解线性谐振子的薛定谔方程，避免了特殊函数等复杂的数学运算，得出了量子力学教材完全相同的结果。     

Some results on fractionaln-factor-critical graphs

A simple graphG is said to be fractionaln-factor-critical if after deleting anyn vertices the remaining subgraph still has a fractional perfect matching. For fractionaln-factor-criticality, in this paper, one necessary and sufficient condition, and three sufficient conditions related to maximum matching, complete closure are given.     

Desorption of surfactant and sintering of surface-modified PdxNi1 − x nanoparticles

A series of Pd_xNi_1 − x nanoparticles in a diameter of 6-7 nm were prepared by wet chemical reduction. They were then modified with two surfactants, stearic acid (SA) and polyethylene glycol (PEG). Desorption of the surfactant was studied using a temperature programmed desorption technique, and the sintering behavior of surface-modified Pd_xNi_1 − x nanoparticles was examined. Since surface energy of the nanoparticles depends on the alloy composition, it can be correlated with the desorption temperature of surfactant from the nanoparticle surface. Because Ni has a higher surface energy, the surfactant desorption temperature increases as the Ni content increases. With the same stoichiometry, the desorption temperature of SA is always higher than that of PEG. The SA-modified nanoparticles have higher thermal stability and are less sintered than PEG-modified nanoparticles. The sintering and growth behavior of the nanoparticles can be correlated with variation of surface energy due to different surface modification.     

Separate Polarization Modes Synchronization and Synchronization Switches between Vertical-Cavity Surface-Emitting Lasers

For vertical-cavity surface-emitting lasers (VCSELs) with polarization-rotated feedback, there exist several synchronization types such as synchronizations between total powers and synchronizations between separate polarization modes. Based on the two-mode rate equations, we study and compare numerically the performances of different synchronization types. Our results show that three synchronization types exhibit good performances when their synchronization conditions are satisfied. They are the complete synchronization between total powers, complete synchronization between x-polarized modes, and generalized synchronization between x-polarized and y-polarized modes. The former two types are sensitive to the injection rate and spontaneous emission, while the third type is contrary. Synchronization type with the best performance may switch from one to another, with changing of injection rate and spontaneous emission factor.     

Effect of C layer on the structures and magnetic properties of (0 0 1)-oriented [C/CoPt]n/Ag films

CoPt/Ag and [C/CoPt]n/Ag thin films have been prepared onto the glass substrates by magnetron sputtering. We investigated the evolution of texture and magnetic properties of CoPt/Ag and [C/CoPt]n/Ag films. The results show that C-doping plays an important role in improving (0 0 1) texture, improving the order parameter S, reducing the intergrain interactions, and making the magnetization reversal mechanism more close to Stoner-Wolfarth rotational mechanism. The growth mechanism of (0 0 1) texture also seems to be related strongly to the films thickness. Our results show that the highly (0 0 1)-oriented films with ordered fct phase have a significant potential for the perpendicular media of extremely high-density recording.