神光-Ⅲ主机装置成功实现60 TW/180 kJ三倍频激光输出

2015年9月15日,由中国工程物理研究院激光聚变研究中心承担研制的神光-Ⅲ主机装置成功完成了48束激光三倍频180 kJ/3 ns、峰值功率60 TW的输出测试实验,标志着神光-Ⅲ主机装置已全面建成并达到设计指标,成为现有输出能力世界排名第二、亚洲排名第一的惯性约束聚变激光驱动器。神光-Ⅲ主机装置可输出48束阵列化的大口径高功率脉冲激光（分为6个束组,每个束组为一个42的光束阵列）,主要由前端、预放、主放、测量与光束控制、靶场、计算机集中控制等六大系统组成。神光-Ⅲ主机装置的研制,凝集了我国在光学、激光、脉冲功率、精密机械、快电子学、自动控制、化学清洗、超精密加工等多个学科领域的顶尖技术成就,堪称中国光学工程界的奇迹。神光-Ⅲ主机装置采用腔内四程放大+变口径90翻转U型反转器+助推三程放大的总体构型,在未使用大口径隔离组件的条件下,采用焦斑控制、精密准直、锥管镜面空间滤波及杂散光管理等技术措施,实现了基频光十万倍增益、10 kJ量级输出状态下的自激振荡抑制与反激光规避,在系统具备50%以上透过率的前提下确保了装置的运行安全,大大提高了装置的性价比。神光-Ⅲ主机装置的建设过程中攻克了高精度种子光源、高品质激光束的预放大、精密同步、辐射定标损伤检测、全光路精密波前校正、甚多束光路自动准直、自动化靶瞄准定位、计算机集中控制、高效谐波转换、一搁准精密安装、超精密光学加工、缺陷控制损伤阈值提升等多项光学工程技术难关,确保了装置具备优秀的技术指标性能。神光-Ⅲ主机装置打破了激光系统串行调试的规律,基于基准体系技术,通过不同束组间的错级并行,实现总体集成工作的满负荷运转,确保了装置建设的总体进度和集成效率。装置从第一个光机模块进场到基本完成集成调试,用时仅四年半,创造了又一个中国速度。在工程建设过程中以自主研发的传输放大动力学设计软件、激光泵浦动力学软件、杂散光树叉追迹软件等为基础,融合了部分光学设计商用软件,构建了覆盖光学、结构、电气、控制等多个学科的高功率激光装置数字化设计平台,基本实现了装置设计的全面数字化。工程建设过程中形成的质量、安全、进度控制体系保证了工程顺利进行。神光-Ⅲ主机装置的全面建成,标志着我国在大型激光驱动器方面的总体设计、总体集成、精密装校、加工制造、光学检测、关键技术等核心能力实现了体系化发展与成熟,面向更大规模的激光驱动器研制的光学工程体系已基本形成。     

轴向B-dot束流偏角探测器信号的频域处理

提出一种针对轴向B-dot束流偏角探测器信号的频域处理方法,从探测器本身的频域响应出发,并从探测器信号的频谱中提取有效信息,能够一定程度上消除束流横向偏移对偏角测量的干扰。该方法是对时域分析法处理轴向B-dot信号的一种补充,相比于时域法的一阶近似,对信号频谱的处理更接近对复杂真实情况的近似,但并未从根本上解决由安装误差等原因导致束流横向偏移而带来的测量不准确。从标定试验台测试结果来看,该方法的测试精度与时域法相当,约1 mrad。     

冲功率装置汇流区由电子发射导致的电流损失机制

面向大型脉冲功率装置聚龙一号(PTS装置),以电磁粒子模拟方法(PIC)为依托,围绕真空汇流区双层柱-孔盘旋(DPHC)结构区域,研究电子发射对DPHC结构在电流传输、汇聚过程中的影响。使用全三维大规模并行粒子模拟软件NEPTUNE3D,简化并建立DPHC结构的物理和几何模型,利用全电路数值模拟的方法获得PTS装置真空轴向绝缘堆处开路和短路电压波形曲线作为输入条件,计算得到DPHC结构中磁场强度分布。分别考虑是否存在电子发射过程,获得输出端电流损失随时间变化曲线,经过对比得到峰值时刻由阴极表面电子发射所导致的电流损失率为0.46%~0.48%。     

基于激光等离子体研究的高性能扫描晶体谱仪（英）

在激光等离子体研究中,电磁脉冲干扰对实验结果影响很大,为了减小这一影响,设计一款新的扫描晶体谱仪,整个机身设计成几乎全密闭的良导体。该晶体谱仪通过更换晶体和调整入射角可以获得较宽范围的测量窗口。在X光光谱为2.5~3.5 keV范围内的测量试验中,该扫描晶体谱仪的谱分辨能力为13（在2960 eV）,时间分辨率为10 ps。其谱分辨和时间分辨可以满足对激光等离子体的研究。     

实时磁性测试深入理解锂离子电池中的过渡金属催化作用

催化剂由于具有降低电化学过电位和改善动力学条件的能力,在各种储能器件中起着至关重要的作用.在锂离子电池中,首圈放电过程中形成的固体电解质界面膜,通常被认为是一旦形成就稳定不分解的.而在过渡金属的催化下,这种电解质分解衍生的聚合物凝胶状膜(PGF)能可逆地形成和分解.这种过渡金属催化机制可以进行催化储锂,即形成的PGF具...     

Natural Antioxidants,Tyrosinase and Acetylcholinesterase Inhibitors from Cercis glabra Leaves

Cercis glabra is a plant belonging to the legume family, whose flowers and barks are commonly used as food and traditional Chinese medicines. However, its leaves are usually disposed of as wastes. This research comprehensively investigated the bioactive constituents of C. glabra leaves, and two new phenolic, ceroffesters A-B (1–2) and thirteen known compounds (3–15) were isolated. Their structures were elucidated by spectroscopic methods such as nuclear magnetic resonance (1D NMR and 2D NMR), high-resolution electrospray ionization mass spectra (HR-ESI-MS), optical rotatory dispersion (ORD) and electronic circular dichroism (ECD). All of them were assessed for their antioxidant activities through ABTS, DPPH and PTIO methodologies, and evaluated for inhibitory activities against two enzymes (mushroom tyrosinase and acetylcholinesterase). As a result, compounds 3–6, 10 and 13 exhibited evident antioxidant activities. Meanwhile, compounds 5, 10 and 13 showed the most potent tyrosinase inhibitory activities, with IC₅₀ of 0.64, 0.65 and 0.59 mM, and compared with the positive control of 0.63 mM (kojic acid). In the initial concentration of 1 mg/mL, compounds 3, 5 and 6 demonstrated moderate inhibitory activities against acetylcholinesterase with 85.27 ± 0.06%, 83.65 ± 0.48% and 82.21 ± 0.09%, respectively, compared with the positive control of 91.17 ± 0.23% (donepezil). These bioactive components could be promising antioxidants, tyrosinase and acetylcholinesterase inhibitors.     

Density Functional Theory Study of the Point Defects on KDP (100) and (101) Surfaces

Surface defects are usually associated with the formation of other forms of expansion defects in crystals, which have an impact on the crystals’ growth quality and optical properties. Thereby, the structure, stability, and electronic structure of the hydrogen and oxygen vacancy defects (V_H and V_O) on the (100) and (101) growth surfaces of KDP crystals were studied by using density functional theory. The effects of acidic and alkaline environments on the structure and properties of surface defects were also discussed. It has been found that the considered vacancy defects have different properties on the (100) and (101) surfaces, especially those that have been reported in the bulk KDP crystals. The (100) surface has a strong tolerance for surface V_H and V_O defects, while the V_O defect causes a large lattice relaxation on the (101) surface and introduces a deep defect level in the band gap, which damages the optical properties of KDP crystals. In addition, the results show that the acidic environment is conducive to the repair of the V_H defects on the surface and can eliminate the defect states introduced by the surface V_O defects, which is conducive to improving the quality of the crystal surface and reducing the defect density. Our study opens up a new way to understand the structure and properties of surface defects in KDP crystals, which are different from the bulk phase, and also provides a theoretical basis for experimentally regulating the surface defects in KDP crystals through an acidic environment.     

Solid Sampling Pyrolysis Adsorption-Desorption Thermal Conductivity Method for Rapid and Simultaneous Detection of N and S in Seafood

In this work, a rapid method for the simultaneous determination of N and S in seafood was established based on a solid sampling absorption-desorption system coupled with a thermal conductivity detector. This setup mainly includes a solid sampling system, a gas line unit for controlling high-purity oxygen and helium, a combustion and reduction furnace, a purification column system for moisture, halogen, SO₂, and CO₂, and a thermal conductivity detector. After two stages of purging with 20 s of He sweeping (250 mL/min), N₂ residue in the sample-containing chamber can be reduced to <0.01% to improve the device’s analytical sensitivity and precision. Herein, 100 s of heating at 900 °C was chosen as the optimized decomposition condition. After the generated SO₂, H₂O, and CO₂ were absorbed by the adsorption column in turn, the purification process executed the vaporization of the N-containing analyte, and then N₂ was detected by the thermal conductivity cell for the quantification of N. Subsequently, the adsorbed SO₂ was released after heating the SO₂ adsorption column and then transported to the thermal conductivity cell for the detection and quantification of S. After the instrumental optimization, the linear range was 2.0–100 mg and the correlation coefficient (R) was more than 0.999. The limit of detection (LOD) for N was 0.66 μg and the R was less than 4.0%, while the recovery rate ranged from 95.33 to 102.8%. At the same time, the LOD for S was 2.29 μg and the R was less than 6.0%, while the recovery rate ranged from 92.26 to 105.5%. The method was validated using certified reference materials (CRMs) and the measured N and S concentrations agreed with the certified values. The method indicated good accuracy and precision for the simultaneous detection of N and S in seafood samples. The total time of analysis was less than 6 min without the sample preparation process, fulfilling the fast detection of N and S in seafood. The establishment of this method filled the blank space in the area of the simultaneous and rapid determination of N and S in aquatic product solids. Thus, it provided technical support effectively to the requirements of risk assessment and detection in cases where supervision inspection was time-dependent.     

Ultrabright AIEdots with tunable narrow emission for multiplexed fluorescence imaging

AIEgen doped fluorescent nanodots (AIEdots) have attracted lots of attention, due to their superior characteristics as fluorescent probes, such as excellent photostability, large Stokes shift, high brightness and tunable emission. Unfortunately, most of the currently available AIEdots exhibit broad emission bandwidth, which limits their applications in multiplexed fluorescence imaging and detection. In this work, the strategy of designing and fabricating narrow emissive AIEdots (NE-AIEdots) with tunable wavelengths was presented by constructing a light-harvesting system with high energy transfer efficiency. Efficient intra-particle energy transfer from highly doped AIEgens, serving as the light-harvesting antenna, to the lightly doped narrow emissive fluorophore, resulted in high brightness and narrow emission. The emission band of NE-AIEdots with the full-width-at-half-maximum varied from 18 to 36 nm was 3–6.3 times narrower than that of traditional AIEdots. The single-particle brightness of NE-AIEdots was over 5-times that of commercial quantum dots under the same excitation and collection conditions. Taking advantage of the superior performance of these NE-AIEdots, multiplexed fluorescence imaging of lymph nodes in living mice was realized, which supported the future applications of NE-AIEdots for in vivo multiplexed labeling and clinical surgery.

AIEdots with high brightness and narrow emission bandwidth were developed for multiplexed in vitro and in vivo fluorescence imaging.     

脉冲大电流放电引爆含能材料产生冲击波的储层改造

介绍了复合电热化学法产生冲击波的机理和冲击波改善储层物性的机制;给出了脉冲大电流引爆含能材料弹丸的结构和典型的放电参数,开展了冲击波致裂储层的实验研究;检测了样品在冲击作用下的动态应变及影响储层解吸附特性的关键参数（包括孔隙度、渗透率、抗拉、抗压强度等）,并在实验前后进行了测量和对比。研究表明,电热化学法产生的冲击波可在圆柱形砂岩样品上产生幅值为1000~1500的应变量,使砂岩出现了宏观裂缝;样品平均孔隙度由15.24%增至15.62%,平均渗透率由1.749 0910-3 m2增至2.467 0810-3 m2;抗压、抗拉和抗剪强度均下降了约30%。