Synthesis and properties of novel soluble poly(amide‐imide)s with different pendant substituents

Two types of novel fluorinated diimide‐diacid monomers—[2,2′‐(4,4′‐(3′‐methylbiphenyl‐2,5‐diyl)bis(oxy)bis(3‐(trifluoromethyl)‐4,1‐phenylene))bis(1,3‐dioxoisoindoline‐5‐carboxylic acid)] (III) and [2,2′‐(4,4′‐(3′‐(trifluoromethyl)biphenyl‐2,5‐diyl)bis(oxy)bis(3‐(trifluoromethyl)‐4,1‐phenylene))bis(1,3‐dioxoisoindoline‐5‐carboxylic acid)] (IV)—were respectively designed and prepared by the condensation of diamines I and II with two molar equivalents of trimellitic anhydride. From both diimide‐diacids, two series of novel poly(amide‐imide)s (PAIs) (IIIa–IIIe and IVa–IVe) bearing different pendant groups were prepared by direct polymerization with various aromatic diamines (a–e). All the PAIs had a high glass transition temperatures (T_gs, 232–265 °C), excellent thermal stability (exhibiting only 5% weight loss at 493–542 °C under nitrogen) and good solubility in various organic solvents due to the introduction of the bulky pendant groups. The cast films of these PAIs (80–90 μm) had good optical transparency (73–81% at 450 nm, 85–88% at 550 nm and 87–89% at 800 nm) and low dielectric constants (2.65–2.98 at 1 MHz). The spin‐coated films of these PAIs presented a minimum birefringence value as low as 0.0077–0.0143 at 650 nm and low optical absorption at the near‐infrared optical communication wavelengths of 1310 and 1550 nm. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3243–3252     

Structural,magnetic and optical properties of vanadium doped zinc oxide: Systematic first-principles investigations

The electronic structural, magnetic and optical properties of pure and V-doped ZnO are investigated by first-principles calculations based on the density functional theory. With the introduction of V atoms, the spin-splitting near the Fermi level leads to a net magnetic moment of the system. A significant possibility of room temperature ferromagnetism (RTFM) originated from the Ruderman–Kittel–Kassuya–Yosida (RKKY) exchange is predicted. Oxygen vacancy is positive to enhance the ferromagnetism while zinc vacancy is negative. With respect to the optical properties, the presence of V atoms was found to have an obvious influence on the transmittivity, especially in the low energy region. A slight V-doping can keep a high optical transmission and smoothly modulate the optical bandgap.     

Infrared imaging as a means of visually characterizing the thermoacoustic onset process influenced by a Helmholtz resonator

A Helmholtz resonator can be used as a transmission part to connect the thermoacoustic engine (TE) with its load. However, the resonator can significantly influence the performance of the TE. In order to investigate the impact of a Helmholtz resonator on the onset process of a TE, infrared (IR) imaging is firstly used as a visualization method to characterize the onset mechanism. The influence of dimensions of the Helmholtz resonator on the onset process are analyzed experimentally and theoretically. Results show that the Helmholtz resonator reduces the pressure amplitude at the onset moment and increases the onset temperature of the TE, both of which depend on the acoustic power absorbed from the TE. Onset without a sudden increase of pressure amplitude is observed with the Helmholtz resonator at resonance length. This paper shows that IR imaging is an effective way to characterize the temperature distribution in a TE study.     

Cerium (IV) ammonium nitrate (CAN)-mediated regioselective synthesis and anticancer activity of 6-substituted 5,8-dimethoxy-1,4-naphthoquinone

6-Substituted 5,8-O-dimethyl-1,4-naphthoquinones (6-DMNQ), the promising anticancer scaffolds, were selectively generated by oxidative demethylation of 2-substituted 1,4,5,8-tetramethoxynaphthalenes with CAN in EtOAc/H₂O in comparatively high yields. An interesting finding was that apart from the reported electron-withdrawing effects of substituents on position 2 of naphthalene ring, regioselective synthesis of 6-DMNQ was largely dependent on the steric effects in CAN-mediated oxidation. The selective cytotoxicities of 6-DMNQ from the in vitro cell-based assays were exhibited between the cancer cells and normal cells. Moreover, most of sulfur-containing 6-DMNQ derivatives displayed better anticancer activities than the corresponding oxygen-containing ones, which could provide an available strategy for the design of 6-DMNQ derivatives as potential anticancer agents.     

Synthesis and rheological investigation of self‐healable deferoxamine grafted alginate hydrogel

Deferoxamine grafted alginate (SA‐DFA) was successfully synthesized via amidation of sodium alginate with deferoxamine mesylate as determined by H‐NMR and elemental analysis. SA‐DFA with different graft yield was obtained by adjusting the ratio of sodium alginate and deferoxamine mesylate. It was found that aqueous solution of SA‐DFA could form hydrogel spontaneously due to hydrogen bonding interactions, which also endowed the SA‐DFA hydrogel with self‐healing capability. The healing efficiency of SA‐DFA hydrogels ranged from 53.64 to 90.16%. In addition, surface morphologies of SA‐DFA hydrogels before/after self‐healing process were demonstrated by SEM images. We anticipated that such self‐healable alginate hydrogel would be applied in the field of wound healing. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 856–865     

Highly oriented and ordered microstructures in block copolymer films

Block copolymer (BCP) films with long-range lateral ordering and orientation are crucial for many applications. Here, we report a simple, versatile strategy based on a solution casting procedure, to produce millimeter thick film of BCPs with highly oriented nanostructures. Transmission electron microscope (TEM), small angle X-ray scattering (SAXS), and Hansen solubility parameters were used to study the morphology and interactions of the system. A variety of BCP-solvent pairs were investigated. Factors including set-up geometry, BCP characteristics, solvent evaporation, surface tension, and interactions, such as solvent-BCP, solvent-substrate, and BCP-substrate were examined. A mechanism is proposed to describe the observed long-range lateral ordering and orientation in films up to 1 mm in thickness. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1369–1375     

Physical,hydrochemical and isotopic characteristics of springs in Beijing,China, compared to historical properties

A physical, hydrochemical and isotopic evaluation of springs in Beijing was conducted in 2009 to reveal apparent changes in the properties of those springs. The results showed that most of the 2nd class springs and more than 50 % of the 1st class springs recorded in the early 1980s were depleted, while the discharges of existing springs have also decreased sharply. In addition, the majority of springs were of the HCO₃–Ca–Mg type and good water quality, with the quality indices changing slightly compared to those recorded 30 years ago. The abundances of ²H, ¹⁸O, and ³H in the springs indicated that most of the springs were of meteoric origin with a relatively close connection to modern atmospheric precipitation. As a result, the springs have a relatively strong renewability within a shallow circulation.     

Naphthodithiophene-based donor materials for solution processed organic solar cells

As an emerging donor building block, naphthodithiophene (NDT) is causing more concerns in the field of organic semiconductors. With the rigid and coplanar molecule structure, NDT will exhibit more application space relying on its own advantage for facilitating the charge carrier transport. In this review article, we have summarized the development progress on the NDT-based donor materials for solution processed organic solar cells. Discussions and comments on those representative NDT type materials about structure and property are also presented.