单向拉伸聚偏氟乙烯的取向结构

本文用X射线衍射法测定了单向拉伸聚偏氟乙烯的(110)和(020)晶面的极图,拉伸温度为100℃和160℃,拉伸比从250％—420％。利用衍射强度分布数据I(φ、ψ)计算出晶面均方余弦(cos~2(?)),经坐标转换并借助Wilchin-sky方法,得到c轴相对拉伸方向的均方余弦(cos~2φ_(c,y))。当T=100℃时,拉伸伴随有晶型转化,表现为晶面衍射峰强度和位置的变化,在此基础上对α晶型和β晶型的取向分别进行了分析。     

The research on the high quality TiO2, MoO3-doped WO3 electrochromic film

The high quality TiO2, MoO3-doped WO3 electrochromic film was prepared by the sol–gel method for the first time. The sol, which has hydrogen peroxide (H2O2) and oxalic acid (H2C2O4), was very stable at room temperature and quite suitable for the deposition of films. The WO3 electrochromic film prepared from this doped sol had excellent performance, such as short response time, no cracks, good adhesion to the substrate, high coloring efficiency and longevity of service.     

Resolution method for overlapping peaks based on the fractional-order differential

Equations between the differential order and the maximum of the fractional-order differential for the specified peak signals are developed based on the variation of the maximum of the specified peak signals at different orders. Also, equations between the differential order and the zero-crossing of the fractional-order differential of the specified peak signals are proposed according to the variation of the zero-crossing of the specified peak signals at different orders. Characteristic paramters of the Gaus- sian peak, Lorentzian peak, and Tsallis peak can be estimated using estimator I and estimator II which are obtained by the equations above. As a result, a new method is presented to resolve the overlapped peaks signal. Firstly, a fractional-order differential of the specified peak signals is obtained with the fractional-order differentiation filter. Then, characteristic paramters of the specified peak signals can be extracted using estimator I and estimator II. Finally, the Tsallis peak is used as a model to assign the overlapping peak signals correctly. Experimental results show that the proposed method is efficient and effective for the simulated overlapping peaks and detected overlapping voltammetric peak signals.     

Growth of ramification-like ZnO rods in the presence of polyaniline

To obtain new materials with synergetic or complementary behaviors, polyaniline composite filled with ZnO rods in ramification-like structure was prepared by a hydrothermal approach. Comparative experiments of ZnO preparation in the presence of some metal ions were also carried out. The results indicated that the morphology of ZnO was strongly affected by the preparation condition. The method to grow ZnO rods in the presence of polyaniline offers a simple approach to obtain polyaniline composite filled with linear ZnO structure. The results of X-ray photoelectron spectroscopy show that the strong interaction between ZnO and polyaniline possibly exists to cause the charge transfer.     

Synthesis of 5-Substituted 1,3-Dimethylpyrazolo[4,3-<Emphasis Type="Italic">e</Emphasis>][1,2,4]triazines

Summary.  A novel method for the synthesis of a new series of 5-substituted 1,3-dimethyl pyrazolo[4,3-e][1,2,4]triazines is described. The new synthetic strategy is based on the classical Bischler 1,2,4-benzotriazine synthesis. This approach involves the preparation of 5-hydrazinopyrazole from 5-chloro-1,3-dimethyl-4-nitropyrazole followed by acylation and nitro group reduction to form the corresponding 4-amino-3-(acylhydrazino)pyrazoles. Intramolecular oxidative cyclization of the latter derivatives, using polyphosphoric acid, produced the respective target pyrazolotriazines.     

Remarkably enhanced capacitance of ordered polyaniline nanowires tailored by stepwise electrochemical deposition

A stepwise deposition method was employed to create ordered polyaniline (PANI) nanowires with remarkably enhanced capacitance. Cyclic voltammetry, AC impedance, and galvanostatic charge/discharge cycling were employed to investigate the electrochemical performance of the PANI electrodes. The PANI-deposited electrode exhibits much higher capacitance than those prepared by one-step deposition method, which were mainly contributed from the unique nano structure of PANI and the increased biological, economical, and technical surface areas. The superior capacitive behaviors of the nano PANI electrodes show great potential in preparation of high efficient electrochemical capacitors or rechargeable batteries.     

Detection of environmental chemicals by SPR assay using branched cyclodextrin as sensor ligand

We obtained the association constants Ka of estrogen (E2) and environmental chemicals by the surface plasmon resonance (SPR) assay using the immobilized mono-6-O-α-maltosyl-β-CD (G₂βCD) compared with the immobilized β-CD and the immobilized estrogen receptor (ER). The association behavior of G₂βCD was shown as a ER model compound. The calibration curve was determined by the initial rate of association depending on the various concentrations, and the minimum detectable concentrations in the order of parts per billion were calculated. The SPR assay has advantages that the pre-treatment of the sample is not necessary and the immobilized ligand is stable and useful for the repeated measurement.     

Sulfonated poly(ether ether ketone)/poly(amide imide) polymer blends for proton conducting membrane

Poly(amide imide) (PAI) was synthesized using 1,2,4-benzenetricarboxylic anhydride (BTBA) and 4,4′-methylenebis(phenyl isocyanate) (MBPI). SPEEK/PAI blend membranes were prepared and investigated by NMR, GPC, FT-IR and AFM. The chemical structures of PAI and SPEEK were characterized by using NMR and FT-IR. The adsorption of the SPEEK/PAI blend membrane of water or methanol solution was also characterized. The significant swelling of the blend membrane in concentrated methanol solution was explained by the solubility parameter. The water diffusion coefficient (D_H2O) was related to the lambda value of the membrane. The SPEEK/PAI blend membrane had a lower proton conductivity and methanol permeability than Nafion. However, the relative selectivity (proton conductivity divided by methanol permeability) of the SPEEK/PAI 70/30 (w/w) blend membrane was 3.46 × 10⁴ S s cm⁻³, which is closed to that of Nafion (3.30 S s cm⁻³).     

Measurement of labile Cu in soil using stable isotope dilution and isotope ratio analysis by ICP-MS

Isotope dilution is a useful technique to measure the labile metal pool, which is the amount of metal in soil in rapid equilibrium (<7 days) with the soil solution. This is normally performed by equilibrating soil with a metal isotope, and sampling the labile metal pool by using an extraction (E value), or by growing plants (L value). For Cu, this procedure is problematic for E values, and impossible for L values, due to the short half-life of the ⁶⁴Cu radioisotope (12.4 h), which makes access and handling very difficult. We therefore developed a technique using enriched ⁶⁵Cu stable isotope and measurement of ⁶³Cu/⁶⁵Cu ratios by quadrupole inductively coupled plasma mass spectrometry (ICP-MS) to measure labile pools of Cu in soils using E value techniques. Mass spectral interferences in detection of ⁶³Cu/⁶⁵Cu ratios in soil extracts were found to be minimal. Isotope ratios determined by quadrupole ICP-MS compared well to those determined by high-resolution (magnetic sector) ICP-MS. E values determined using the stable isotope technique compared well to those determined using the radioisotope for both uncontaminated and Cu-contaminated soils.     

Polymer-Titanium hybrids obtained by radical polymerization and Sol-Gel process

The possibility to prepare hybrids made by poly(vinyl acetate) (PVAc), poly(methyl methacrylate) (PMMA) and/or poly(ethyl acrylate) (PEtA) with TiO₂ was studied. The processes of polymer formation-radical polymerization and sol-gel process for inorganic network —were achieved simultaneously. Due to a high reactivity of titanium isopropoxide (TIP) in the sol-gel process, a complexant comonomer, allyl acetoacetate (AlAcAc), was used. Covalent bonds between polymer and inorganic chains were obtained by addition of trialkoxysilane derivates with vinyl (VTES) or methacryloyl (MPTS) groups. The presence of TIP inhibits the radical polymerization of vinyl acetate (VAc). The PVAc-TiO₂ hybrids were produced by the sol-gel process of TIP in the presence of pre-obtained PVAc. Except for VTES and MPTS, trialkoxysilane derivates with methyl (MeTES), octyl (OTES) and phenyl (PTES) groups were used. The thermal stability of hybrids is strongly affected by TiO₂ presence and by the type of trialkoxysilane derivates. The thermal stability of PVAc hybrids decreases in the presence of TiO₂ inorganic network. The glass transition temperature of polymers increases in the presence of the inorganic network.