Preparation of a butyl–silica hybrid monolithic column with a “one-pot” process for bioseparation by capillary liquid chromatography

A butyl–silica hybrid monolithic column for bioseparation by capillary liquid chromatography (cLC) was prepared with butyl methacrylate and alkoxysilanes through a “one-pot” process. The effects of polycondensation temperature, volume percentage of N,N′-dimethylformamide, and content of cetyltrimethylammonium bromide and butyl methacrylate on the morphologies of the hybrid monolithic columns prepared were investigated in detail. Baseline separations of proteins and small peptides on the hybrid monolithic column were achieved by cLC with gradient elution. In addition, the resulting hybrid column was also applied for analysis of tryptic digests of bovine serum albumin by cLC coupled with tandem mass spectrometry. The results demonstrate its potential application in separation of complex biological samples.     

Tribological behaviors of a novel trilayer nanofilm: the influence of outer chain length and interlayer thickness

Polydopamine (coded as PDA) is reported to be very adhesive and reactive due to the attached functional groups, such as amine and hydroxyl groups. In this work, taking advantage of the condensation between Si–OH of the hydroxylated alkyltrichlorosilane (ATS) and C–OH on PDA surface, ATS molecules with different chain carbon number of 10, 14 and 18 were grafted onto the 3‐aminopropyl triethoxysilane (APTES)‐PDA dual‐layer film, which was composed of PDA outerlayer and APTES underlayer, on Si substrate. Thus, hydrophobic trilayer films coded as APTES‐PDA‐ATS were prepared successfully. In order to reveal the dependence of the tribological behaviors upon the microstructures of the film, tribological experiments were conducted on an atomic force microscope and a ball‐on‐plate tribometer. Experimental results showed that the (micro‐) friction reducing (characterized by a parameter of relative friction coefficient or friction coefficient, RFC or FC) and macro‐wear resisting (characterized by anti‐wear life) behaviors were related with the chain length of outerlayer and the PDA thickness. Specifically, on one hand, as the chain length increases, RFC/FC decreased and macro anti‐wear life lengthened; on the other hand, as PDA gets thicker, RFC increased and the anti‐wear life enhanced. Copyright © 2013 John Wiley & Sons, Ltd.     

Kinetic spectrophotometric determination of trace manganese (II) with dahlia violet in nonionic microemulsion medium

A new catalytic kinetic spectrophotometric method has been developed for the determination of trace amount of manganese (II) in nonionic microemulsion medium. The method is based on the catalytic effect of manganese (II) on the oxidation of dahlia violet by potassium periodate with nitrilotriacetic acid as an activitor in the presence of nonionic microemulsion. Under the optimum conditions, the calibration graph is linear in the range of 0.0004-0.0056 μg ml⁻¹ of manganese (II) at 580 nm. The detection limit achieved is 3.75×10⁻⁵ μg ml⁻¹. Manganese (II) in foodstuff samples was determined with satisfactory results.     

一种新型的涂丝钙离子场效应敏感器件

从1970年以来,不少学者对场效应敏感器件(简称ISFET)做了研究^[1-4],本文作者利用二-(二异辛基苯基磷酸)钙为电活性物质研制成Ca²⁺-ISFET,并测定了器件的各项性能参数。     

3—（3,5—二氨基—2,4,6—三硝基苯基）氨基—5—硝基—1,2,4—三唑的合成

多硝基多氨基三唑类衍生物作为含能材料,具有高氮、致密、钝感等优点。本文通过3-氨基-1,2,4-三唑和三硝基三氯苯的缩合,再经过三唑碳原子上的硝化反应和芳环上的氨化反应,合成并鉴定了标题化合物。     

2,6-O-二戊基-3-O-三氟乙酰β-环糊精和聚硅氧烷混合手性石英毛细管柱分离对映体

本文合成了部分烷基化三氟乙酰化的β-环糊精手性固定相(DP-TFA-β-CD),并把它与普通聚硅氧烷OV-7混合制备出了柱效高、热稳定性好的手性石英毛细管柱。与直接涂DP-TFA-β-CD相比,混合固定相能在较短分析时间内对卤代烃、醇、酯、γ-内酯、胺等对映体有更好的拆分。     

改性环糊精气相色谱手性固定相拆分对映体的选择性及拆分机理的讨论

改性环糊精气相色谱手性固定相拆分对映体的选择性及拆分机理的讨论周昕，万宏，欧庆瑜（中国科学院兰州化学物理研究所兰州７３００００）１前言自１９８８年Ｋｏｎｉｇ￣［１］等人成功地将改性环糊精用于毛细管气相色谱固定相拆分对映体以来，环糊精衍生物以其高选择性...     

Photochemical and electrochemical properties of zinc chlorin-C60 dyad as compared to corresponding free-base chlorin-C60, free-base porphyrin-C60, and zinc porphyrin-C60 dyads.

The photochemical and electrochemical properties of four chlorin-C60 or porphyrin-C60 dyads having the same short spacer between the macrocycle and the fullerene are examined. In contrast with all the previous results on porphyrin-fullerene dyads, the photoexcitation of a zinc chlorin-C60 dyad results in an unusually long-lived radical ion pair which decays via first-order kinetics with a decay rate constant of 9.1 x 10(3) x s(-1). This value is 2-6 orders of magnitude smaller than values reported for all other porphyrin or chlorin donor-acceptor of the molecule dyad systems. The formation of radical cations of the donor part and the radical anion of the acceptor part was also confirmed by ESR measurements under photoirradiation at low temperature. The photoexcitation of other dyads (free-base chlorin-C60, zinc porphyrin-C60, and free-base porphyrin-C60 dyads) results in formation of the ion pairs which decay quickly to the triplet excited states of the chlorin or porphyrin moiety via the higher lying radical ion pair states as is expected from the redox potentials.     

含酰亚胺骨架的大环化合物合成、结构及其对阴离子的识别研究

在磷酸催化作用下,采用前体二胺N,N’-(2-胺基苯基)-2,6-二甲酰亚胺吡啶(1)和前体二醛1,4-二(2’-甲酰苯氧基)丁烷(2)进行缩合作用得到[1+1]Schiff碱大环化合物3,进一步将Schiff碱大环3还原得到饱和大环4.并采用1H NMR,IR,质谱和元素分析等技术对大环3和4的组成进行了表征.采用X射线单晶衍射技术测定了Schiff碱大环3的晶体结构,结果表明大环3具有扭曲的"8"字形结构.采用UV-vis光谱滴定技术对大环与系列阴离子的键合作用进行了考察,结果表明,Schiff碱大环3对F-离子有明显的选择性识别作用,并测定了该配位反应的配位比和平衡常数.     

Electrochemical Reduction of Carbon Dioxide to Methanol on Hierarchical Pd/SnO2 Nanosheets with Abundant Pd–O–Sn Interfaces

Electrochemical conversion of CO₂ into fuels using electricity generated from renewable sources helps to create an artificial carbon cycle. However, the low efficiency and poor stability hinder the practical use of most conventional electrocatalysts. In this work, a 2D hierarchical Pd/SnO₂ structure, ultrathin Pd nanosheets partially capped by SnO₂ nanoparticles, is designed to enable multi‐electron transfer for selective electroreduction of CO₂ into CH₃OH. Such a structure design not only enhances the adsorption of CO₂ on SnO₂, but also weakens the binding strength of CO on Pd due to the as‐built Pd–O–Sn interfaces, which is demonstrated to be critical to improve the electrocatalytic selectivity and stability of Pd catalysts. This work provides a new strategy to improve electrochemical performance of metal‐based catalysts by creating metal oxide interfaces for selective electroreduction of CO₂.