微通道板固定图案噪声及测试研究

叙述微通道板的噪声,着重介绍微通道板固定图案噪声及其简便新颖而又实用的一种测试方法,给出测试结果并进行分析。     

Dihydrogen bond in C2H4− n Cl n ··· NaH (n = 0, 1, 2, 3) complexes: ab initio,AIM and NBO studies

The dihydrogen-bonded complexes of ethylene and its chlorine derivatives with sodium hydride have been systematically investigated at the MP2/6-311++G(d,p) level. The studied complexes are divided into three groups (including Linear, Five- and Six-membered cyclic structures) based on the optimized structures. The structural, energetic and topological parameters are presented and analysed in terms of their possible correlation with the interaction energies and the intermolecular H?···?H distances. The nature of the electrostatic interaction in this type of dihydrogen bond has also been unveiled by means of atoms in molecules (AIM) and natural bond orbital (NBO) analysis. The effect of ring structure on the dihydrogen bonding systems has been considered by comparing with the corresponding linear structure. NBO analysis suggests that the electron density transfer (EDT) in cyclic structures have dual-channel character.     

可聚合型溶致液晶单体3,4,5-三(11-十一烷氧丙烯酰氧基)苯甲酸钠的自组装及紫外光固化性能

以3,4,5-三羟基苯甲酸为原料,依次经过酯化、醚化、酰氯化和钠盐化四步反应合成一种可聚合型溶致液晶单体3,4,5-三(11-十一烷氧丙烯酰氧基)苯甲酸钠,并对其结构进行了傅里叶变换红外与1H核磁表征. 在室温下研究了该单体在水中的自组装行为,组装体结构通过偏光显微镜与X射线衍射仪进行表征. 研究表明,单体与水比例为80:20时可自组装为层状(La)相,92:8时组装为反六方(H_II)相,这与临界堆积参数的理论计算相吻合,表明单体浓度是影响组装体结构的重要因素. 在组装的基础上研究了含不同光引发剂的溶致液晶体系的双键转化率及固化后组装体结构的保留. 经实时红外表征及溶胶-凝胶法的验证发现在光强为30 mW/cm²的365 nm下曝光30 min,含引发剂Darocur2959的溶致液晶体系双键转化率可达78%. 聚合之后La相与H_II相的纳米结构都得到了保留.     

离子速度成像技术研究2-溴戊烷的光解离动力学

运用离子速度成像技术研究了2-溴戊烷分子在～234 nm处的光解离动力学. 通过分析光解产物Br(²P_3/2)(简称Br)和Br(²P_1/2) (简称Br*)的速度影像,分别得到其速度分布和角度分布. Br和Br*的速度分布可以用两个高斯分布拟合,分别对应于2-溴戊烷在～234 nm处两个独立的光解离反应通道. 高能的高斯分量对应于C-Br伸缩振动模式的直接解离,低能的高斯分量对应于弯曲振动和C-Br伸缩振动耦合所导致的解离. 确定出光解离产物Br的相对量子产率为0.892,结合Br和Br*碎片的各项异性参数和溴原子的相对量子产率,讨论了³Q₀、³Q₁和¹Q₁激发态分别对产物Br和Br*的贡献. 通过对比溴代戊烷4种同分异构体光解离过程的差异,讨论了分子烷基分支化对光解机理的影响.     

An improved least square channel estimation algorithm for coherent optical OFDM system

This paper presents an improved processing added to conventional least square (LS) channel estimation to modify its performance for coherent optical orthogonal frequency division multiplexing (CO-OFDM) system. By testing selected limitation factors of the existing algorithms, the influence of our improved algorithm to the performance of CO-OFDM system were studied and compared with other published algorithms. The simulation results of the study demonstrated that the proposed approaches achieved better channel estimation performance and are considered as a more appropriate alternative for CO-OFDM system with the tradeoff between complexity and performance.     

Strong perpendicular magnetic anisotropy in Co2FeAl0.5Si0.5 film sandwiched by MgO layers

Co2FeAl0.5Si0.5 (CFAS)-based multilayers sandwiched by MgO layers have been deposited and annealed at different temperatures. Perpendicular magnetic anisotropy (PMA) with the magnetic anisotropy energy density Ku ≈2.5×106 erg/cm3 (1 erg = 10-7 J) and the coercivity Hc = 363 Oe (1 Oe = 79.9775 A · m-1) has been achieved in the Si/SiO2/MgO (1.5 nm)/CFAS (2.5 nm)/MgO (0.8 nm)/Pt (5 nm) film annealed at 300 ℃. The strong PMA is mainly due to the top MgO layer. The structure can be used as top magnetic electrodes in half-metallic perpendicular magnetic tunnel junctions.     

双反射镜式光电经纬仪测角误差的分析(轴系部分)

双反射镜式光电经纬仪由于采用了反射镜跟踪头,轴系误差对测角精度的影响不同于典型光电经纬仪。本文从建立经纬仪三维直角坐标系入手,建立了该类型经纬仪轴系误差引起测角误差的数学模型,为精度分析和误差修正提供了依据。     

乙酸对DNA空间结构微观损伤的Raman光谱特征

利用Raman光谱技术从分子水平研究了乙酸对鲱鱼精DNA空间结构微观损伤的特征。实验结果表明,鲱鱼精DNA被乙酸浸润处理后,Raman特征频率与强度均发生了不同程度的变化。证明了乙酸对DNA的损伤是整个分子,包括骨架磷酸基团、脱氧核糖及碱基。不仅是DNA的构象,而且其构型也发生了变化：氢键断裂,B型构象被修改,DNA单、双链断裂,碱基也受到了严重损伤。其碱基损伤严重程度依次为胞嘧啶、胸腺嘧啶、鸟嘌呤和腺膘呤。     

偏振对飞秒激光辐照LiF晶体的影响

飞秒激光聚焦到LiF晶体内部, 晶体的加工形貌随偏振改变. 实验表明, 偏振方向平行于<110> 晶向时, 加工起点到表面的距离是<100>偏振下的1.08 倍; 而<110>偏振下加工终点到表面的距离是<100> 偏振下的1.01 倍. 为了解释加工形貌的偏振依赖, 建立了逆韧致辐射、雪崩电离和无辐射跃迁的模型, 首先, 价带电子通过强场电离和雪崩电离, 从激光中吸收能量跃迁到导带, 该过程用电子密度演化方程和傍轴非线性薛定谔方程描述, 求解方程得到导带电子密度; 其次, 导带电子通过无辐射跃迁过程释放能量给晶格, 由能量守恒计算出晶格温度沿激光传播方向的分布; 最后, 晶格温度超过熔点以上的区域被加工. 模拟结果显示, <110>偏振下加工起点到表面的距离是<100> 偏振下的1.03倍, 而<110>偏振下加工终点到表面的距离是<100>偏振下的0.981 倍, 与实验结果基本一致. 虽然Z扫描技术测量的非线性折射率随偏振方向变化, 但是非线性折射率的变化趋势与实验结果相反. 模拟和实验证明逆韧致辐射导致加工形貌随偏振变化.