Fresnel diffraction of truncated Gaussian beam

We study the Fresnel diffraction of Gaussian beam truncated by one circular aperture, and give the general analytic expression of the Fresnel diffraction of truncated Gaussian beam denoted by Bessel functions. Then the characteristic of the axial diffraction fluctuation and the influence of the caliber of the circular aperture and the wave waist of Gaussian beam on the diffraction distributions are discussed, respectively. Through the numerical calculations, the characteristics of the transverse diffraction are presented and the relationship of the fluctuation of the transverse diffraction profile and the position of the axial point is shown. The physical origin of the fluctuation of Fresnel diffraction intensities of truncated Gaussian beam is expressed in terms of Fresnel half-zone theory. These phenomena and the conclusions are important for the measurement of the parameters of the beam and its applications.     

A Step Tunable External Cavity Semiconductor Laser for WDM Network Deployment

We put forward a kind of tunable external cavity semiconductor laser with feedback on both chip facets. It outputs the single-frequency laser with high side-mode suppression ratio and the frequency could be step tuned.     

脉冲激光偏振方向对氮分子高次谐波的影响——基于含时密度泛函理论的模拟

采用含时密度泛函方法,结合赝势模型和电子交换相关作用的广义梯度近似,模拟了氮分子在超强飞秒激光脉冲作用下的高次谐波产生现象,并研究了激光脉冲偏振方向对氮分子高次谐波的影响.结果表明氮分子的高次谐波谱具有典型原子谐波谱的特征;谐波谱强度随着θ(激光偏振方向与分子轴向夹角)的增大而减小.这与J.Itatanl在Nature上报道的实验结果基本一致.     

Temperature and injection current dependent electroluminescence study of GaInP/AlGaInP quantum well laser diode grown using tertiarybutylarsine and tertiarybutylphosphine

GaInP/AlGaInP triple quantum well (TQW) lasers, grown by metalorganic chemical vapor deposition (MOCVD) using tertiarybutylarsine (TBAs) and tertiarybutylphosphine (TBP), were fabricated with a pulsed anodic oxidation (PAO) process. The devices worked at room temperature (RT) with the lowest threshold current density (J_th) of 1.5 kA/cm² ever reported for GaInP/AlGaInP lasers grown using TBAs and TBP. Temperature dependent (35–250 K) electroluminescence (EL) study of the GaInP/AlGaInP laser diode showed almost the same luminescence quenching behavior at a high temperature region (120–250 K), independent of the injection current (100–150 mA). A model involving a nonradiative recombination mechanism was presented to interpret the EL quenching behavior over the experimental temperature range. The nonradiative recombination centers in the Al-containing barrier or cladding layer are believed to contribute to the loss of carriers via nonradiative recombination. PACS 78.60.Fi; 71.20.Nr; 78.67.De; 81.15.Gh; 42.55.Px     

医用生物材料的低温保存研究

生物材料的低温保存一般都要经历降温过程、低温储存过程及复温过程,其中降温过程中对生物细胞的影响最大.每一种生物细胞都有自己合适的降温速率,如能满足其这种降温速率,细胞所受到的低温损伤最小,则生物细胞的复活率最高.文中介绍程序控制变速降温装置的主要结构及几种典型生物体的降温过程.最后,对器官的低温保存进行分析讨论.     

基于无基底焦平面阵列红外热像仪的理论模型分析

基于双材料微悬臂梁热变形原理的光学读出非制冷红外探测阵列经历了从有基底结构向无基底结构的发展过渡,无基底阵列的红外成像结果和有限元模型分析均表明无基底阵列不满足恒温基底条件.本文结合电学比拟的方法,提出了一种新的基于无基底焦平面阵列(focal plane Array,FPA)的热传递分析的理论模型.分析采用整体考虑的思路,避开了无基底FPA阵列各单元热传递互相影响所产生的复杂热分布分析,并考虑了框架对热量的吸收与传递.理论模型采用外边框与环境等温的边界条件,虽不及有限元方法对边界条件的处理灵活,但也已取 关键词： 光学读出 无基底 非制冷红外成像 焦平面阵列     

The optical near-field speckles and their first order statistics on the basis of the integral equations of electromagnetic field

Speckle fields are the random light wave distributions produced when the light fields are scattered from random surfaces or a random medium. They appear in many optical phenomena that are related to light propagations[1,2] and have found wide appli-cations in a variety of scientific and technical fields. The examples of the recent impor-tant applications of speckles include the analysis of the movement of the granules[3], the three-dimensional imaging for the microstructures of metal nanocryst…     

Determination of path length difference by low coherence interference spectrum

Path length difference is the key parameter in two-beam interferometer, especially in low coherence interferometer. It determines the visibility of the interference fringes. In this study, we present a method to determine the path length difference between two arms of a fiber optic Mach–Zehnder interferometer by evaluating the peaks of power distribution of the interference spectrum with a wide band light source. The experimental results are in close agreement with the theoretical calculations.     

Nonvolatile photorefractive holographic recording in Sc:Ce:Cu:LiNbO3

In this paper experimental studies of nonvolatile photorefractive holographic recording in Ce:Cu:LiNbO₃ crystals doped with Sc(0,1,2,3 mol%) were carried out. The Sc:Ce:Cu:LiNbO₃ crystals were grown by the Czochralski method and oxidized in Nb₂O₅ powders. The nonvolatile holographic recording in Sc:Ce:Cu:LiNbO₃ crystals was realized by the two-photon fixed method. We found that the recording time of Sc:Ce:Cu:LiNbO₃ crystal became shorter with the increase of Sc doping concentration, especially doping with Sc(3 mol%), which exceeds the so-called threshold, and there was little loss of nonvolatile diffraction efficiencies between Sc(3 mol%):Ce:Cu:LiNbO₃ and Ce:Cu:LiNbO₃ crystals.     

四轮驱动全向底盘的控制方法研究

为提高机器人移动的灵活性和机动性,使机器人到任意位置均沿直线行走并改变姿态,需在传统的两轮驱动底盘上增加驱动轮,本文主要针对四轮驱动全向底盘的控制方法进行研究。本文对四轮驱动全向底盘进行运动学分析并建模,得到了控制系统传递函数,并进仿真验证;对四轮驱动全向底盘进行了动力学建模,分析了如何避免出现“打滑”现象;导航方式采用了经济、精度较高的全向码盘导航方式;控制上采用闭环控制,加入前置探测点和超前校正环节,并且考虑了实际过程中机体的加减速问题。实验结果表明,提出的控制方法可以使四轮驱动全向底盘实现预设功能,并且具有较高的控制精度,研究内容对机器人的灵活移动有着十分重要的意义。