Rational design of core–shell molecularly imprinted polymer based on computational simulation and Doehlert experimental optimization: application to the separation of tanshinone IIA from Salvia miltiorrhiza Bunge

Computational simulation and Doehlert experimental optimization were done for the rational design of a core-shell molecularly imprinted polymer (CS-MIP) for use in the highly selective separation of Tanshinone IIA (TSIIA) from the crude extracts of Salvia miltiorrhiza Bunge (SMB). The functional monomer layer of the polymer shells directed the selective occurrence of imprinting polymerization at the surface of silica through the copolymerization of vinyl end groups with functional monomers and also drove TSIIA templates into the formed polymer shells through the charge-transfer complex interactions between TSIIA and the functional monomer layer. As a result, the maximum rebinding capacity was achieved with the use of optimal grafting ratio by the Doehlert design. The CS-MIP exhibited high recognition selectivity and binding affinity to TSIIA. When the imprinted particles were used as dispersive solid phase extraction sorbents, the recovery yield of TSIIA reached 93% by a one-step extraction from the crude extracts of SMB, and the purity of TSIIA was larger than 98% by HPLC analysis. These results show the possibility of a highly selective separation and enrichment of TSIIA from the SMB using the TSIIA-imprinted core-shell molecularly imprinted polymers.     

Entangled coordination polymers with mixed N- and O-donor organic linkers: a case of module-matching priority

A series of four coordination polymers showing entangled architectures based on cobalt and mixed N-donor/O-donor ligands, namely [Co(4,4'-BPIPA)(TP)]·2DMF (1), [Co(4,4'-BPIPA)(2,6-NDC)(DMF)]·DMF (2), [Co(4,4'-BPIPA)(2,6-NDC)]·2DMF (3) and [Co(4,4'-BPIPA)(4,4'-BPDC)]·2DMF (4) (4,4'-BPIPA = N,N'-bis-4-pyridinyl-isophthalamide, TP = terephthalic acid, 2,6-NDC = 2,6-naphthalenedicarboxylic acid, 4,4'-BPDC = 4,4'-biphenyldicarboxylic acid), have been synthesized under solvothermal conditions. Complex 1, containing 4,4'-BPIPA and relatively short dicarboxylate ligands (TP), exhibits two-dimensional (2D) two-fold interpenetration of double wavy 4(4)-sql nets. Complex 2 displays interesting 2D→3D parallel polycatenation of undulated 2D 4(4)-sql layers built by 4,4'-BPIPA and moderate dicarboxylate ligands (2,6-NDC). Complexes 3 and 4, although constructed of dicarboxylate ligands with different lengths (moderate 2,6-NDC and long 4,4'-BPDC), possess similar 3-fold interpenetration of identical self-catenated single nets with 6(5)·8-mok topologies. It has been found that the length of the dicarboxylate ligands plays a key role of module-matching in the self-assemblies of complexes 1-4. Moreover, the effect of the conformations of 4,4'-BPIPA, which can be controlled by tuning reaction temperatures, is also discussed.     

Capture efficiency of Escherichia coli in fimbriae-mediated immunoimmobilization

Capturing pathogens on a sensor surface is one of the most important steps in the design of a biosensor. The efficiency of a biosensor at capturing pathogens has direct bearing on its sensitivity. In this work we investigated the capturing of Escherichia coli on substrates modified with antibodies targeting different types of fimbriae: K88ab (F4), K88ac (F4), K99 (F5), 987P (F6), F41, and CFA/I. The results suggest that all these fimbriae can be used for the efficient immobilization of living E. coli cells. The immobilization efficiency was affected by the purity and clone type of the antibody and the fimbriae expression level of the bacteria. For a specific fimbriae type, a higher immobilization efficiency was often observed with the monoclonal antibodies. Immunoimmobilization was utilized in an antibody microarray immersed in a mixed culture of pathogens to demonstrate the rapid and simultaneous label-free detection of multiple pathogens within less than 1 h using a single test. The capture rate of living pathogens exceeds a single bacterium per 100 × 100 μm(2) area per 0.5 h of incubation for a bulk concentration of 10(5) cfu/mL.     

Biomimetic enhanced chemiluminescence of luminol-H2O2 system by manganese (III) deuteroporphyrin and its application in flow injection determination of phenol at trace level

A novel, sensitive and high selective flow-injection chemiluminescence (FI-CL) method for the determination of phenol is reported, based upon its decreasing effect on the CL reaction of luminol with hydrogen peroxide catalyzed by manganese (III) deuteroporphyrin [MnDP, Scheme 1, 3] in alkaline solution. Under the selected optimized experimental conditions, the relative CL intensity was linear with phenol in the range of 4.0 × 10⁻⁹ to 4.0 × 10⁻⁷ g mL⁻¹. The detection limit (3σ) was 6.3 × 10⁻¹⁰ g mL⁻¹ and the relative standard deviation for 1.0 × 10⁻⁷ g mL⁻¹ phenol (n = 11) was 2.99%. The regression equation was I = 120.79 + 1.14 × 1010c (R = 0.9936). This method has been applied to the determination of phenol in water with satisfactory results.     

TETRABUTYLAMMONIUM－TETRACYANOQUINODIMETHANE AS ELECTRON－TRANSFER MEDIATOR IN AMPEROMETRIC GLUCOSE SENSOR

ＴＥＴＲＡＢＵＴＹＬＡＭＭＯＮＩＵＭ－ＴＥＴＲＡＣＹＡＮＯＱＵＩＮＯＤＩＭＥＴＨＡＮＥＡＳＥＬＥＣＴＲＯＮ－ＴＲＡＮＳＦＥＲＭＥＤＩＡＴＯＲＩＮＡＭＰＥＲＯＭＥＴＲＩＣＧＬＵＣＯＳＥＳＥＮＳＯＲ￥ＣｈａｎｇＱｉｎｇＳＵＮ；ＷｅｎＢｅＳＯＮＧ；ＤｕｏＺ...     

Syntheses，Structures and Spectroscopic Properties of Mo（W）－Cu－S－Cluster Compounds with Dialkyldithiocarbamate Ligands

Ｓｙｎｔｈｅｓｅｓ，ＳｔｒｕｃｔｕｒｅｓａｎｄＳｐｅｃｔｒｏｓｃｏｐｉｃＰｒｏｐｅｒｔｉｅｓｏｆＭｏ（Ｗ）－Ｃｕ－Ｓ－ＣｌｕｓｔｅｒＣｏｍｐｏｕｎｄｓｗｉｔｈＤｉａｌｋｙｌｄｉｔｈｉｏｃａｒｂａｍａｔｅＬｉｇａｎｄｓＣａｏＲｏｎｇ；ＬｅｉＸｉｎ－Ｊｉ...     

希土水杨酸与8─羟基喹啉三元配合物研究

合成了六种希土（ＲＥ）－水杨酸（Ｈ２ｓａｌ）－８－羟基喹啉（Ｈｈｑ）三元固体配合物，其通式为ＲＥ（Ｈｓａｌ）２·ｈｑ（ＲＥ＝Ｙ，Ｌａ，Ｎｄ，Ｓｍ，Ｈｏ，Ｅｒ）．通过元素分析、摩尔电导、ＩＲ、Ｆａｒ－ＩＲ、ＵＶ－Ｖｉｓ、ＴＧ－ＤＴＡ分析，研究了配合物的组成、性质和成键特性．通过抑菌试验表明配合物对于霉菌具有抑真菌能力．     

Thermocontrolling ion permeation through binary component membrane composed of crown ether liquid crystal/PVC

In view of the nature of orderness in structure and the mesomorphism in property of liquid crystal, the function of which is further exploited by integrating it with the feature of crown ether. The monoarmed crown ether liquid crystals are successfully applied to the imitation of biomembrane transport. Binary component membrane composed of crown ether liquid crystal and PVC was first developed. Such a novel model of biomimetic membrane is capable of imitating ingeniously the thermocontrolling transport of biomembrane, thus the essential function of liquid crystal in membane transport is more fully exploited. It was suggested, consequently, that the molecules of the crown ether liquid crystal could assemble themselves to form ionic channels, as they exist in mesophase.Of still more significance is that the thermocontrolling transport of ions through the membrane is found to be operative selectively and the permeation of ion is under the direct influence of the thermal turmoil of the crown ether liquid cr     

聚合所得初生聚乙烯的晶型

聚合所得初生聚乙烯的晶型伍青，张启兴，卢泽俭，王海华，欧阳巍，林尚安，张光华（中山大学高分子研究所，广州，５１０２７５）（中国科学院广州化学研究所）关键词聚乙烯，结晶，单斜晶，颗粒形态热力学稳定的聚乙烯晶型为正交晶系［１］．当聚乙烯受一定应力作用时如...     

有机硅改性丙烯酸酯共聚乳液合成方法及胶膜性能的研究

用一次投料法、单体乳液滴加法和引发剂滴加法有机硅改性丙烯酸酯共聚乳液，聚合过程、胶粒形态及乳液稳定性的观测结果表明：单体乳液滴加法是合成该类乳液的最佳方法，研究了单体乳液滴加法中有机硅含量与聚合反及胶膜性能的关系，结果表明：有机硅含量在１５％以下时，聚合反应可以顺利进行，胶膜性能不仅依赖于聚合时有机硅单体的总量，而且还依赖于有机硅单体中活性硅氧烷所占的比例。