Detailed Structural Characterizations of SBA‐15 and MCM‐41 Mesoporous Silicas on a High‐Resolution Transmission Electron Microscope

Using high‐resolution transmission electronic micrograph (HR‐TEM) observation, one can clearly see the pore geometry of the MCM‐41 and SBA‐15 mesoporous silicas to determine that their pore shapes are hexagonal and round, respectively. With the perpendicular orientations of the nanochannels to the electron beam, parallel line images of the (100) and (110) repeating spacings were observed. In the SBA‐15 mesoporous silicas, there are byproducts of the granular silica and disordered mesostructures, attributed to the weak hydrogen interactions between Pluronic 123 blockcopolymer and the silica species. There are also many different and significant +π disclination defects in SBA‐15 and MCM‐41 surfactant‐silica composites. The SBA‐15 with a thicker silica wall is more stable under irradiation by high‐energy electron beams compared to MCM‐41, which has thinner wall thickness. Some carbon nanostructure impurities were found in some carbon films on the metal grids.     

Synthesis of imidazoles as novel emivirine and S‐DABO analogues

5‐Alkyl‐4‐benzyl‐1,3‐dihydroimidazol‐2‐ones ( 3a‐d ) and 5‐alkyl‐4‐benzyl‐1,3‐dihydroimidazole‐2‐thiones (7a‐d) were prepared via Dakin West reaction on DL‐phenylalanine with the appropriate aliphatic acid anhydrides followed by hydrolysis and reaction with potassium cyanate or potassium thiocyanate. Compounds 3a‐d were alkylated with ethoxymethyl chloride to give the alkylated imidazoles 5a‐d which were considered analogues of Emivirine with deletion of carbonyl group at the 4‐position. Alkylation of 7a‐d afforded the corresponding S‐alkylated derivatives 8a‐p which in a similar way were considered analogues of S‐DABO. However all the imidazole derivatives were devoid of activity against HIV.     

三核钨钼簇合物对苯乙烯氧化反应的催化

关于烯烃的催化氧化,报道较多。Takao等研究了苯乙烯在Ir和Rh络合物存在下的氧化反应;Collman曾报道环己烯在Vaska络合物[IrX(CO)(PPh_3)_2]催化下氧化成环己酮和环已烯氧化物。本文采用Cotton合成的簇合物[W_3O_2(CH_3CO_2)_6(H_2O)_3]Br_2·     

一步法合成多羟基酚酸芳基酯

一些多羟基酚酸芳基酯具有显著的生理活性,可用于医药、饮料和食品等方面。但目前关于多羟基酚酸芳基酯的合成还研究得不多。传统的方法是(1)保护多羟基酚酸中的酚羟基,(2)活化羧基成酰氯,(3)酯化,(4)去保护基的四步方法。本文将报道多羟基酚酸——2.4——二羟基苯甲酸(1)直接与酚类成酯的反应。即将二氯磷酸芳基酯(ROPOCI_2)(3)作为缩合剂,应用于一步法合成(1)芳基酯,以较好产率得到了(1)的七个新芳基酯(2_a—2_g),并经元素分析及波谱鉴定。同时还首次研究了缩合剂     

CdS/SiO2复合材料的低频Raman散射研究

对用溶胶凝胶法制备的ＣｄＳ／ＳｉＯ２复合材料进行低频Ｒａｍａｎ散射研究，结果表明可从其低频Ｒａｍａｎ散射峰位计算出ＣｄＳ微晶的粒径，两种不同的低频振动模式由激发光的两种偏振方向加以区分，低频Ｒａｍａｎ散射射的二级散射峰根据实验结果加以指认，所得平均粒径结果与透射电镜观察结果有较好的对应关系，复合材料吸收光谱吸收边蓝移与ＣｄＳ纳米子粒径之间存在着密切的关系，实验证明，样品吸收边能量与ＣｄＳ平均粒径的     

膦取代的羰基铂簇的合成,结构和性质

Pt(PPh_3)_2Cl_2在碱性介质中,与一氧化碳直接进行还原及羰基化反应,得到五种膦取代的羰基铂配合物:Pt_5(μ_2-CO)_5(CO)(PPh_3)_4 1,Pt_3(μ_2-CO)_3(PPh_3)_3 2,Pt_3(μ_2-CO)_3(PPh_3)_4 3,Pt_4(μ_2-CO)_5(PPh_3)_4 4,以及Pt(Cl)(PPh_3)_2(COOCH_3) 5。经X-射线单晶衍射分析,确定了新的三核铂羰基簇2以及配合物5的分子结构。还讨论了1和5的生成机理。     

à 3E态CH3N自由基的稳定性

观察到了CH_3N自由基Ã ~3E←X~3A_2体系317-272 nm的荧光激发谱, 特别讨论了振动激发的Ã 态的稳定性. 报导了v_3~′=6态的色散荧光和荧光时间谱, 该态在240 Pa下的寿命大约是80 ns. 实验表明Ã ~3E 态CH_3N自由基是稳定的, 势能面至少距振动基态4800 cm~(-1)内是束缚的, 异构化或预离解作用并不重要.     

溶胶-凝胶法合成纳米铬酸锶镧的工艺研究

以硝酸镧、硝酸铬、硝酸锶为原料，乙二醇为分散剂，柠檬酸为胶溶剂，用溶胶-凝胶法合成纳米级的铬酸锶镧粉体。利用TG，DSC，XRD分析研究了粉料的晶化过程。利用HREM分析了煅烧温度、含锶量对粉料粒径的影响。研究表明，获得纳米晶的最佳烧结温度在800℃。随着锶掺杂量的增加，粉料的粒径逐渐变小。     

H2SO4处理的Nb2O5/γ -Al2O3催化剂表面酸性与催化性能研究

用Hammett指示剂法、红外光谱（IR）、示差扫描量热-热重法（DSC-TG）和微型催化反应装置等研究了H₂SO₄处理的负载型Nb₂O₅/γ-Al₂O₃催化剂表面酸性和催化异丁烯（IB）与异丁醛（IBA）反应生成2，5-二甲基-2，4-己二烯（DMHD）的催化性能。结果表明随所用H₂SO₄浓度增加，Nb₂O₅/γ-Al₂O₃催化剂表面酸性增强，B酸量增加，L酸量先增加后下降。经H₂SO₄处理的Nb₂O₅/γ-Al₂O₃催化剂的催化活性明显增加，但当H₂SO₄浓度超过0.05 mol·L^-1时催化活性又急剧下降，这可能是因为在H₂SO₄处理的催化剂表面形成的强酸中心上，产物分子进一步转化为积炭且封闭催化剂活性表面，导致催化活性下降。