Determination and quantification of astragalosides in Radix Astragali and its medicinal products using LC–MS

In the present study, a liquid chromatography–tandem mass spectrometry method was developed for the separation and simultaneous quantification of astragalosides I–IV in samples of Radix Astragali and a medicinal product thereof (Jinqi Jiangtang tablets). Chromatographic separation was achieved on an Agilent Eclipse XDB (ODS)‐C18 column with a mobile phase consisting of acetonitrile and 0.05% formic acid aqueous solution by use of an efficient 17‐min program. A triple quadrupole mass spectrometer was operated in positive ionization mode with multiple reaction monitoring for the detection of four astragalosides. The saponin ginsenoside Rg1 (similar structure to astralagosides) was used as an internal standard. All calibration curves showed excellent linear regressions (r² ? 0.9912) within the range of tested concentrations. The intra‐ and inter‐day variations were below 4.57% in terms of RSD. The recoveries were 94.38–103.53% with RSD of 1.39–3.58% for spiked Radix Astragali samples. The method was successfully used for the analysis of samples of Radix Astragali and Jinqi Jiangtang tablets. In conclusion, we have developed a rapid, efficient, and accurate LC–MS/MS method for the detection of astragalosides, which can be applied for quality control of Radix Astragali and related medicinal products.     

Correlation between hydrogen‐bonding interaction and mechanical properties of polyimide fibers

Novel co‐polymerization polyimide (PI) fibers based on 4,4′‐oxydianiline (ODA)‐pyromellitic dianhydride (PMDA) were prepared. 2‐(4‐Aminophenyl)‐5‐aminobenzimidazole (PABZ) containing the N? H group was introduced into the structure of the fibers as the proton donor. The results of Fourier transform infrared (FTIR) and dynamic mechanical analysis (DMA) showed that hydrogen bonding occured between the N? H group and chains, which strongly enhanced interchain interaction. This hydrogen bonding interaction increased the tensile strength and initial modulus of the PI fibers up to 2.5 times and 26 times, respectively, compared to those of homo‐PI PMDA‐ODA fibers with no hydrogen‐bonding interaction because of the absence of proton donors after the imidization process. In the mean time, glass transition temperature (T_g) of the modified PI fibers was found to be 410–440°C, which was higher than that of the homo‐PI PMDA‐ODA fibers. From the result, a novel access to molecular design and manufacture of high performance PI fibers with good properties could be provided. Copyright © 2009 John Wiley & Sons, Ltd.     

ChemInform Abstract: A New Triclinic Modification of the Pyrochlore‐Type KOs2O6 Superconductor.

ChemInform is a weekly Abstracting Service, delivering concise information at a glance that was extracted from about 200 leading journals. To access a ChemInform Abstract of an article which was published elsewhere, please select a “Full Text” option. The original article is trackable via the “References” option.     

Orthogonal array design (OAD) for the optimization of mercury extraction from soils by dilute acid with microwave heating

The use of dilute acid for mercury extraction from geological samples with microwave assisted heating was investigated. An orthogonal array design OA(16)(4(1)x2(12)) was applied to select the optimum conditions. The effects of the concentration of HNO(3), the additions of HCl and H(2)S0(4), the extraction time and their interactions were evaluated by the mixed-level orthogonal array design (OAD). The results indicated that the addition of small amount of HCl would improve significantly the extraction of mercury from soil matrices. From the study, it is seen that the mercury in the soil matrices could be extracted completely by 14% (v/v) HNO(3) with small quantity of HCl. The effects of the pressure within the digestion vessel and the sample mass were studied under the optimum conditions derived from the OAD. The extraction methods with optimum conditions were evaluated by determining mercury in NIST SRM 1645 River Sediment, NIES CRM No. 2 Pond Sediment and NRCC BCSS-1 Marine Sediment. Recoveries of 78-109% were achieved. Good mean recoveries of 95-98% were also obtained from real soil samples spiked with different species of mercury.     

Electrocatalysis of cytochrome c at a C(60)-gamma-cyclodextrin and Nafion chemically modified electrode

The C(60)-gamma-cyclodextrin and Nafion chemically modified electrode exhibits two redox waves by cyclic voltammetry. Such an electrode will effect reduction and oxidation of cytochrome c and be capable of mediating the electron transfer to cytochrome c.     

表面修饰二氧化锡纳米微晶的制备与表征

制备了硅烷偶联剂KH-570表面修饰的SnO2纳米微晶，通过FT-IR、XPS、TEM和TG-DTA对其结构和表面特性进行表征和研究. FT-IR和XPS分析结果确证了KH-570与SnO2表面是以化学键合或物理吸附方式相结合,粒子表面存在酯基等有机官能团的红外吸收特征；观测到KH-570中Si原子的Si2s和Si2p谱线. TEM分析表明，表面修饰反应增强了SnO2纳米微晶的疏水性和分散性.由XPS和TG的实测数据探讨了纳米粒子具有较低包覆量的可能原因.     

Formation of nanostructured polymer filaments in nanochannels

We describe the use of hard etching methods to create nanodimensional channels and their use as templates for the formation of polymer filament arrays with precise dimensional and orientational control in a single integrated step. The procedure is general as illustrated by the radical, coordination, and photochemical polymerizations that were performed in these nanochannels. The nanochannel templates (20 nm high, 20-200 nm wide, and 100 mum long) were fabricated by the combined use of electron-beam lithography and a sacrificial metal line etching technique. Radical polymerization of acrylates, metal-catalyzed polymerization of norbornene, and photochemical polymerization of 1,4-diiodothiophene were carried out in these nanochannels. The polymers grown follow the dimensions and orientation of the channels, and the polymer filaments can be released without breaking. The approach opens up the possibility of just-in-place manufacturing and processing of patterns and devices from nanostructured polymers using well-established polymer chemistry.     

钌(Ⅱ)卟啉催化顺式二苯乙烯类化合物的选择性合成

由芳醛制得的腙盐在钌(Ⅱ)卟啉催化下发生自身偶合，以较高收率合成了二苯乙烯类化合物(～90％的顺式选择性)。部分中间体及目标化合物的结构经^1H NMR，^13C NMR和MS表征。     

氢化物发生原子荧光光谱法测定污水中的砷

用HNO3-HClO4混合酸消解污水样,采用氢化物发生原子荧光光谱法测定污水中的砷含量。在最佳实验务件下,线性范围为0～40μg/L,检出限为0．4μg/L,测定结果的相对标准偏差小于4％,加标回收率为91．5％～100．9％。