光学渡越辐射测量中能量分辨精度分析

 基于光学渡越辐射原理的用于高能强流电子束束流参数在线测量及诊断系统,具有时间响应快、分辨率高等特点,可以测量电子束的束剖面、发散角、能量等多个参数。分析了测量系统的结构参数（包括了透镜的焦距、成像面位置、CCD像元尺寸）对电子束能量测量精度的影响,并在理论上模拟了电子束的发散角的影响。还根据系统数据的特点,阐述了数据噪声对能量测量结果精度的影响,指出了光学渡越辐射测量中电子束能量分辨精度受到多种因素的影响,需要在数据处理时考虑修正。     

具有时间分辨能力的强流电子束束剖面测量系统

 高能强流电子束的束参数测量是加速器研制过程中重要的一项测量工作,由于光学渡越辐射具有时间响应快、分辨率高等特点而被用于测量电子束的具有时间分辨能力的束剖面、发散角、能量等多个参数;通过电子束束参数的时间分辨测量则能够了解电子束产生、输运中的问题,非常有利于加速器的研究与调试。一种具有时间分辨能力的、利用光学渡越辐射进行高能强流电子束束斑测量的系统在中国工程物理研究院被建立起来,并在12 MeV LIA的电子束束斑的测量中用于电子束传输研究,该系统拍摄图像的间隔时间最小为10 ns,最小的曝光时间为3 ns,具有一次可以拍摄8幅图像的能力,并获得了12 MeV LIA约100 ns内相应的时间分辨的束斑变化情况,观察到了一些过去未观察到的现象,为加速器的研究提供了又一个新测试方法。     

Neutron halos in the excited states for N=127 isotones

Properties of the ground states and the excited states of N=127 isotones are investigated by using the nonlinear relativistic mean field theory with the interactions PK1. By analyzing the rms of proton and neutron, the single particle energies of valence nucleon and the density distributions of neutron, proton and the last neutron, it can be found that there exists a neutron halo in the excited states of 3d5/2, 4s1/2 and 3d3/2 in 209Pb. It is also predicted that there exists a neutron halo in the excited states of 3d5/2, 4s1/2 and 3d3/2 in 207Hg, 208Tl, 210Bi and 211Po.     

Eu3+-site occupation in CaTiO3 perovskite material at low temperature

In order to clarify the site occupancy of rare-earth ions in rare-earth doped perovskite materials, the un-doped pure CaTiO₃ and Eu³⁺-doped CaTiO₃ samples with a series of Ca/Ti ratio were synthesized via high-temperature solid-state reaction method. X-ray diffraction (XRD) powder patterns confirm that the crystal structure keeps invariant at various Ca/Ti ratios. Measurement results of unit-cell parameters and X-ray photoelectron spectroscopy (XPS) indicate that Eu³⁺ ions enter into the Ca²⁺ site. The high-resolution photoluminescence spectra of Eu³⁺ ions at 20 K in all samples did not witness a significant change under the excitation at different wavelength, implying that Eu³⁺ ions occupy only one type of site. Considering the small spectral splitting range of ⁵D₀ → ⁷F₂ transition and the large intensity ratio of ⁵D₀ → ⁷F₂/⁵D₀ → ⁷F₁, it can be concluded that Eu³⁺ occupies Ca²⁺ site with larger coordinate numbers rather than Ti⁴⁺ site.     

Removal of oxygen from silicon by electron beam melting

Small amounts of multicrystalline silicon were melted in an electron beam furnace in different experimental conditions in order to investigate the oxygen evaporation behavior during the electron beam melting (EBM) process. The oxygen content level before and after EBM was determined by secondary ion mass spectroscopy. The oxygen content was reduced from 6.177 to 1.629 ppmw when silicon was melted completely at 15 kW with removal efficiency up to 73.6 %. After that, it decreased continually to <0.0517 ppmw when the refining time exceeded 600 s with a removal efficiency of more than 99.08 %. During the melting process, the evaporation rate of silicon is 1.10 × 10^?5 kg/s. The loss of silicon could be reduced up to 1.7 % during oxygen removal process to a desirable figure, indicating EBM is an effective method to remove oxygen from silicon and decrease the loss of silicon.     

Nonclassicality and Decoherence of the Variable Arcsine State in a Thermal Environment

A kind of non-Gaussian state—variable arcsine state is studied by using the input-output theories which relate the statistical properties of the output field to those of the input field. The variable arcsine state (VAS) is generated by using a variable beam splitter (BS), which means that the transmissivity (reflectivity) of the BS is adjustable continuously. The nonclassicality is investigated by studying the negativity of Wigner function (WF). It is shown that the variable arcsine state has negative values of WF when transmissivity is not equal to 1 or 0. The decoherence effect of the VAS is then studied by analytically deriving the time evolution formula of WF.     

Complex object 3D measurement based on phase-shifting and a neural network

An accurate phase-height mapping algorithm based on phase-shifting and a neural network is proposed to improve the performance of the structured light system with digital fringe projection. As phase-height mapping is nonlinear, it is difficult to find the best camera model for the system. In order to achieve high accuracy, a trained three-layer back propagation neural network is employed to obtain the complicated transformation. The phase error caused by the non-sinusoidal attribute of the fringe image is analyzed. During the phase calculation process, a pre-calibrated phase error look-up-table is used to reduce the phase error. The detailed procedures of the sample data collection are described. By training the network, the relationship between the image coordinates and the 3D coordinates of the object can be obtained. Experimental results demonstrate that the proposed method is not sensitive to the non-sinusoidal attribute of the fringe image and it can recover complex free-form objects with high accuracy.     

Influence of the illumination on the subband structure and?occupation in AlxGa1?xN/GaN heterostructures

The subband structure and occupation in the triangular quantum well at Al _x Ga_1−x N/GaN heterointerfaces have been investigated by means of temperature dependent Shubnikov–de Haas (SdH) measurements at low temperatures and high magnetic fields under illumination. After the illumination of the heterostructures, the total two-dimensional electron gas concentration increases, and the SdH oscillation amplitudes are enhanced when there is no additional subband occupation. It is also found that the energy separation between the subbands decreases after the illumination. We suggest that the illumination decreases the electric field and thus weakens the quantum confinement of the triangular quantum well at Al _x Ga_1−x N/GaN heterointerfaces. The GaN layer is thought to be the primary contributor of the excited electrons by the illumination.     

由单负材料组成的一维对称型光子晶体中的隧穿模

由电单负材料A和磁单负材料B构成了一维对称型光子晶体,数值计算表明其带隙中出现了一隧穿模. 材料层数增加,隧穿模宽度急剧变窄,而其位置不变.隧穿模的位置和宽度对入射角的变化都不太敏感. 材料的几何厚度减小,隧穿模的位置蓝移,而其宽度不变. μ_A, ε_B增加,隧穿模的位置红移,宽度减小. 利用隧穿模的以上特性可以实现对电磁波传播的动态调控.     

基于蒙特卡罗方法的α粒子细胞S值计算

在放射性免疫治疗以及硼中子俘获治疗（BNCT）等放射性治疗过程中,粒子通过与人体组织材料相互作用产生次级电子将能量传递给人体组织,放射性核素在细胞尺度分布的不均匀性将严重影响靶区剂量分布。为深入了解放射性核素在细胞中不同位置分布对靶区剂量影响,采用基于历史凝聚算法的Monte Carlo 工具包Geant4编写了细胞S值计算程序。计算了2种细胞尺寸,12种粒子能量,3种源分布方式的细胞S值,与医学内照射剂量（MIRD）委员会解析算法的计算结果进行对比,发现两者差异在1%以内。证明了Geant4在m尺度下细胞剂量计算的可行性,并对BNCT治疗过程中产生的粒子(1.47 MeV与1.78 MeV)的细胞S值进行计算。