CF2自由基A态伸缩振动频率的测定

Laser induced fluorescence excitation spectroscopy has been used to determine the previously ambiguous assignments of A-state stretching frequencies of CF2 radical under supersonic free jet conditions. The measured frequencies are v’1=1012.1±0.5cm-1, v’3=1180.2±0.5cm-1, which is in good agreement with Cameron's[6] calculation result. Furthermore, some transitions attributed to the (1,n-2,0)←(0,0,0), n≦6 progressions are first reported, and new parameters are derived from the spectra obtained.     

CoMo／Al_2O_3和CoMo／TiO_2－Al_2O_3加氢脱硫催化剂的研

研究了ＣｏＭｏ／Ａｌ２Ｏ３和ＣｏＭｏ／ＴｉＯ２－Ａｌ２Ｏ３催化剂的加氢脱硫性能，并用ＬＲＳ，ＸＲＤ和ＴＰＳ等方法表征其表面相结构和硫化行为．结果表明，以ＴｉＯ２－Ａｌ２Ｏ３为担体的Ｍｏ和ＣｏＭｏ催化剂的活性均比相应的Ａｌ２Ｏ３为担体的高；少量Ｃｏ，Ｎｉ助剂的引入可显著提高ＭｏＯ３在担体上的分散度和改进催化剂的活性；Ｃｏ助剂还有降低Ｍｏ物种硫化温度的作用．     

可控降解超支化聚碳硅氮烷的合成与表征

通过锂化四甲基二乙烯基二硅氮烷分别与甲基氢二氯硅烷和二甲基氢氯硅烷的亲核取代反应合成了AB4和AB2型单体AB4M和AB2M,两种单体通过Karstedt催化剂催化的硅氢加成反应分别生成聚碳硅氮烷PAB4M和PAB2M.单体和聚合物的结构通过FT-IR、1H-NMR、13C-NMR、29Si-NMR和体积排除色谱-多角度激光光散射联用(SEC-MALLS)技术进行了表征,结果表明,单体的结构与设计结构相符合;单体聚合时主要以α-硅氢加成方式为主;聚合物具有超支化结构并由N(Si—C)3链节和大量端基双键组成.PAB4M和PAB2M的重均分子量分别为7800和5860g/mol,分子量分布系数分别为2·54和2·31·对PAB4M稳定性的初步研究表明,该聚合物对氯硅烷和在中性条件下对水稳定,但在HCl水溶液中可以降解,且通过控制HCl浓度可以调节其降解速度,从而实现对其控制降解.     

Structure and stability of closo-BnHn−2(CO)2 (n = 5–12)

Closo-B_nH_n−2(CO)₂ (n = 5–12), isolobal analogues of closo-C₂B_n−2H_n, have been investigated at the B3LYP/6-311+G^**density functional level of theory. The most stable isomers of closo-B_nH_n−2(CO)₂ are similar to those of closo-C₂B_n−2H_n in geometric patterns apart from closo-B₆H₄(CO)₂, and closo-B_nH_n−2(CO)₂ is much less strained than closo-C₂B_n−2H_n. Energetic analysis identifies closo-B₆H₄(CO)₂, closo-B₁₂H₁₀(CO)₂ and closo-B₁₀H₈(CO)₂ to be most stable, of which the latter two cages have been prepared experimentally. On the basis of the negative and rather large nucleus independent chemical shifts (NICS), closo-B_nH_n−2(CO)₂ are aromatic. To aid further experimental study, the CO stretching frequencies have been computed.     

直接甲醇燃料电池的稳定性

综述了近年来在直接甲醇燃料电池性能衰减方面的研究进展, 探讨了影响电池运行稳定性的主要因素.     

微层共挤出(PP+EVOH)/PP阻隔材料的结构与性能研究

利用微层共挤出技术制备了具有交替层状结构的(PP+EVOH)/PP复合材料,其中PP为聚丙烯,EVOH为乙烯-乙烯醇其聚物.通过扫描电子显微镜观察、气体渗透实验、差示扫描量热仪分析以及力学性能测试研究了微层共挤出复合材料的形态结构及其对复合材料气体阻隔性能、力学性能以及结晶性能的影响.研究结果表明,通过微层共挤出技术,PP层和(PP+EVOH)层沿挤出方向交替排列,EVOH在PP基体中的的分散形态由零维球形变为一维纤维状,进而演变为二维片状.这些形态导致微层共挤出材料的氮气渗透系数和断裂伸长率较普通共混物分别下降了两个数量级和提高了27倍,并且显著影响其结晶行为.当层数超过64层后,由于PP层减薄,界面增多,EVOH不仅对(PP+EVOH)层中PP相存在结晶成核作用,而且对PP层也有结晶成核作用.     

无筛板型固相萃取柱的制备及其在食品中苯甲酸的测定研究

结合固相萃取(SPE)盘与含支撑物的SPE柱技术,制备了一种新型的无筛板型固相萃取柱.以C18填料为例,以话梅样品为介质对其中的苯甲酸进行分析,并用传统固相萃取小柱平行比较;将SPE与HPLC-UV结合,考察了填料对简单介质中苯甲酸的最大吸附量及洗脱曲线,研究了新型SPE柱在实际应用中的分离纯化效果.结果表明,新型SPE柱对样品的吸附效果更好,规格为200 mg/3 mL的SPE柱对苯甲酸的吸附量达到0.951 mg,超过了传统柱的吸附量0.908 mg;其洗脱曲线与传统柱几乎重合;苯甲酸在1～100 mg/L浓度范围内线性关系良好, r=0.9999,用此SPE柱纯化后的样品加标回收率和相对误差分别在88.4%～102.3%和1.4%～2.9%之间.     

化学/电化学腐蚀法快速制备超疏水金属铝

提出一种金属铝超疏水表面的快速制作方法. 先以化学腐蚀在铝表面形成微米级粗糙结构, 再通过电化学腐蚀构筑纳米结构, 在20 min内完成了超疏水表面所需粗糙结构的制备. 这种化学腐蚀/电化学腐蚀两步法比单独化学或电化学腐蚀方法在时间上缩短了1~2个数量级, 且不受铝材晶形限制, 同时电化学腐蚀所用电流密度也降低了1个数量级, 降低了对电源设备的要求, 可望大规模应用于工业生产和其它金属的超疏水表面制备.     

Development of a highly sensitive and specific monoclonal antibody-based enzyme-linked immunosorbent assay (ELISA) for detection of Sudan I in food samples

The use of Sudan I as an additive in food products has been prohibited in the European Union and many other countries. In this study, a highly sensitive and specific monoclonal antibody (mAb)-based indirect competitive enzyme-linked immunosorbent assay (ELISA) for the detection of Sudan I in food samples was developed. The hapten derivative with a three-carbon-atom length of carboxylic spacer at the azobound para-position was synthesized and coupled to carrier proteins. The hapten-bovine serum albumin (BSA) conjugate was used as an immunogen, while the hapten-ovalbumin (OVA) conjugate was applied as a coating antigen. The mAb against Sudan I was produced by hybridoma technique and the corresponding ELISA was characterized in terms of sensitivity, specificity, precision and accuracy. At optimal experimental conditions, the standard curve was constructed in concentrations of 0.1-100 ng mL⁻¹. The values of IC₅₀ for nine standard curves were in the range of 1.1-2.0 ng mL⁻¹ and the LOD at a signal-to-noise ratio of 3 (S/N = 3) was 0.07-0.14 ng mL⁻¹. The cross-reactivity values of the mAb with Sudan II, III and IV were 9.5%, 33.9% and 0.95%; no cross-reactivity was found with other six edible colorants: Lemon yellow, Bright blue, Indigotin, Kermes, Amarant and Sunset yellow, indicating the assay displays not only high sensitivity but also high specificity as well. The organic solvent effect on the assay was tested. It was observed that the ELISA was tolerated to 30% of methanol and 10% of acetonitrile without significant loss of IC₅₀ value. Six food samples were spiked with Sudan I and the methanolic extracts after appropriate dilution were analyzed by ELISA. Acceptable recovery rates of 88.2-110.5% and coefficients of variation of 2.5-17.4% were obtained. The ELISA for nine spiked samples was confirmed by high-performance liquid chromatography (HPLC) with a high correlation coefficient of 0.9840 (n = 9). The mAb-based ELISA proven to be a feasible quantitative/screening method for Sudan I analysis in food samples with the properties of high sensitivity, specificity, simplicity of sample pretreatment, high sample throughput and low expense.     

甲硫醇和氢原子反应的从头算直接动力学

利用双水平直接动力学方法对反应CH3SH+H的微观机理和动力学性质进行了理论研究.对于此反应的三个反应通道,即—SH和—CH3基团上的两个氢提取通道及一个取代通道,在MP2/6-311+G(d,p)水平上优化得到了各稳定点的结构及振动频率,并在G3(MP2)水平上进行了单点能量计算以获得更精确的能量信息;在此基础上运用结合小曲率隧道效应校正的变分过渡态理论(CVT/SCT)计算了各反应通道在220-1000 K温度区间的速率常数.计算结果表明提取—SH基团上H的反应通道R1在整个反应温度区间都是主要通道,而随着温度的升高,低温下的次要反应通道——取代通道R3变得越来越重要,并且在高温下将成为一个竞争的反应通道;提取—CH3基团上H的反应通道(R2)由于具有较高的反应能垒,因而,其对总反应速率常数的贡献可以忽略.计算得到的总反应速率常数与已有的实验值符合得很好,进而我们预测了该反应在220-1000 K温度范围内速率常数的表达式为:k=5.00×10-18T2.39exp(-119.81/T),为将来的实验研究提供参考.