ICF驱动器靶场环境温度分布特性实验

 对ICF驱动器靶场环境温度的分布特性进行了实验设计,利用PC-2WS多通道温度监测记录仪和PTWD-2A精密温度传感器进行了3个垂直截面的温度测量实验,应用MATLAB软件进行了数据处理,得出了靶场温度分布特性。实验结果表明：设计的暖通空调系统能够保持整个靶场环境温度的稳定,但由于内热源的影响在中间层靶室、编组站附近和工作人员活动频繁区域且由于下层安装设备集中处产生了较大局部环境温度梯度,因此,对这些区域需要加强温控措施。     

基于LabVIEW的超导磁体数采与测控系统研究

根据研制的大口径、高场强的超导强磁装置的特点,选择基于LabVIEW的数据采集和测控系统。低温传感器共六支,分别安装于磁体氦槽和冷屏不同位置,其中碳电阻温度计Cernox三支,铂电阻温度计Pt100两支、Pt1000一只,用于监测磁体温度;超导氦液面计一个,用于监测氦液面高度;根据磁体参数匹配研制了一套可调励磁速率的磁体专用直流电源及其失超保护系统,保证磁体安全运行。所有数据通过NI公司内插DAQ6251数据采集卡的PX I采集,用LabVIEW编写数据采集程序和人机界面。     

A general 3-D nonlinear magnetostrictive constitutive model for soft ferromagnetic materials

In this paper, a new general nonlinear magnetostrictive constitutive model is proposed for soft ferromagnetic materials, and it can predict magnetostrictive strain and magnetization curves under various pre-stresses. From the viewpoint of magnetic domain, it is based on the important physical fact that a nonlinear part of the elastic strain produced by magnetic domain wall motion under a pre-stress is responsible for the change of the maximum magnetostrictive strain in accordance with the pre-stress. Then the reduction of magnetostrictive strain from the maximum is caused by the domain rotation. Meanwhile, the magnetization under various pre-stresses in this model is introduced by magnetostrictive effect under the same pre-stress. A simplified 3-D model is put forward by means of linearizing the nonlinear function, i.e. the nonlinear part of the elastic strain produced by domain wall motion, and by using the quartic of magnetization to describe domain rotation. Besides, for the convenience of engineering applications, two-dimensional (plate or film) and one-dimensional (rod) models are also given for isotropic materials and their application ranges are discussed too. In comparison with the experimental data of Kuruzar and Jiles, it is found that this model can predict magnetostrictive strain and magnetization curves under various pre-stresses. The numerical simulation further illustrates that the new model can effectively describe the effects of the pre-stress or residual stress on the magnetization and magnetostrictive strain curves. Additionally, this model can be degenerated to the existing magnetostrictive constitutive model for giant magnetostrictive materials (GMM), i.e. a special soft ferromagnetic material.     

Degree distributions of the visibility graphs mapped from fractional Brownian motions and multifractal random walks

The dynamics of a complex system is usually recorded in the form of time series, which can be studied through its visibility graph from a complex network perspective. We investigate the visibility graphs extracted from fractional Brownian motions and multifractal random walks, and find that the degree distributions exhibit power-law behaviors, in which the power-law exponent α is a linear function of the Hurst index H of the time series. We also find that the degree distribution of the visibility graph is mainly determined by the temporal correlation of the original time series with minor influence from the possible multifractal nature. As an example, we study the visibility graphs constructed from three Chinese stock market indexes and unveil that the degree distributions have power-law tails, where the tail exponents of the visibility graphs and the Hurst indexes of the indexes are close to the α∼H linear relationship.     

Plasmonic refraction‐induced ultrahigh transparency of highly conducting metallic networks

We demonstrate a high optoelectronic performance and application potential of our random network, with subwavelength diameter, ultralong, and high‐quality silver nanowires, stabilized on a substrate with a UV binder. Our networks show very good optoelectronic properties, with the single best figure of merit of ∼1686, and excellent stability under harsh mechanical strain, as well as thermal, and chemical challenge. Our network transparency strongly exceeds the simple shading limit. We show that this transmission enhancement is due to plasmonic refraction, which in an effective medium picture involves localized plasmons, and identify the inhomogeneous broadening as the key factor in promoting this mechanism. Such networks could become a basis for a next generation of ultrahigh‐performance transparent conductors.

     

S波段相对论速调管振荡器的实验研究

 在20 GW加速器平台上开展了S波段相对论速调管振荡器（RKO）的单次和重复频率束流调制和微波辐射的实验研究。采用无箔空心阴极和0.9 T的恒流源磁场引出束压1 MV、束流13 kA、脉宽40 ns的环形电子束驱动RKO,该电子束经过3个紧密耦合的扩展互作用腔再经过一段漂移管的群聚后,产生了7.8 kA/20 ns的基波调制束流,该调制束流激励三轴输出腔,单次运行输出了3.5 GW的微波辐射,束波转换效率29%,脉宽20 ns;脉冲重复频率20 Hz运行时,输出微波功率3.4 GW,束波转换效率26%。该振荡器具有起振时间快、输出频谱较纯和结构紧凑等优点。     

Light scattering of nanocrystalline TiO2 film used in dye-sensitized solar cells

This paper studies the light scattering and adsorption of nanocrystalline TiO2 porous films used in dye-sensitized solar cells composed of anatase and/or rutile particles by using an optical four-flux radiative transfer model. These light properties are difficult to measure directly on the functioning solar cells and they can not be calculated easily from the first-principle computational or quantitative theoretical evaluations. These simulation results indicate that the light scattering of 1 25 nm TiO2 particles is negligible, but it is effective in the range of 80 and 180 nm. A suitable mixture of small particles （10 nm radius）, which are resulted in a large effective surface, and of larger particles （150 nm radius）, which are effective light scatterers, have the potential to enhance solar absorption significantly. The futile crystals have a larger refractive index and thus the light harvest of the mixtures of such larger rutile and relatively small anatase particles is improved in comparison with that of pure anatase films. The light absorption of the 10μm double-layered films is also examined. A maximal light absorption of double-layered film is gotten when the thickness of the first layer of 10 urn-sized anatase particles is comparable to that of the second larger rutile layer.     

Bridge density functional approximation for non-uniform hard core repulsive Yukawa fluid

In this work, a bridge density functional approximation （BDFA） （J. Chem. Phys. 112, 8079 （2000）） for a nonuniform hard-sphere fluid is extended to a non-uniform hard-core repulsive Yukawa （HCRY） fluid. It is found that the choice of a bulk bridge functional approximation is crucial for both a uniform HCRY fluid and a non-uniform HCRY fluid. A new bridge functional approximation is proposed, which can accurately predict the radial distribution function of the bulk HCRY fluid. With the new bridge functional approximation and its associated bulk second order direct correlation function as input, the BDFA can be used to well calculate the density profile of the HCRY fluid subjected to the influence of varying external fields, and the theoretical predictions are in good agreement with the corresponding simulation data. The calculated results indicate that the present BDFA captures quantitatively the phenomena such as the coexistence of solid-like high density phase and low density gas phase, and the adsorption properties of the HCRY fluid, which qualitatively differ from those of the fluids combining both hard-core repulsion and an attractive tail.     

Mn掺杂GaN电子结构和光学性质研究

采用基于密度泛函理论的第一性原理平面波赝势法计算不同Mn浓度掺杂GaN晶体的电子结构和光学性质.计算结果表明Mn掺杂GaN使得Mn 3d与N 2p轨道杂化,产生自旋极化杂质带,材料表现为半金属性,非常适于自旋注入,说明该种材料是实现自旋电子器件的理想材料,折射率在带隙处出现峰值,紫外区光吸收系数随Mn浓度的增加而增大. 关键词： Mn掺杂GaN 第一性原理 电子结构 光学性质     

一种三次非旋转对称的相位板的检测系统设计

作为零位干涉检测方法中非常有前途的一种方法.计算全息可以用于非旋转对称的非球面的检测.以三次相位板为例,阐述了利用计算全息图检测非旋转对称的非球面的基本原理.分析并推导了三次相位传播过程引入的高阶波像差的理论公式,给出了三次相位板的检测系统的没计结果.详细讨论了计算全息图衍射级次的分离以及计算全息图的二元化,给出了振幅型的计算全息图的图样.计算全息图的刻线最小问隔是40μm,计算全息图的制作精度对检测结果的波前误差的影响仅仅为0.005λ.对检测系统作了详细的公差分析,结果表明所有调整公差对整个检测系统的影响和方根值为83.954 nm.