Fluoridolyse von Cyclophosphazenen und linearen Polyphosphazenen

Fluoridolysis of Cyclophosphazenes and Lineary Polyphosphazenes The fluorination of nongeminal trans P₃N₃Cl₄(NEt₂)₂ and nongeminal trans P₃N₃Cl₃(NEt₂)₃ with the fluorination agent Et₃N · 0,6 HF ( B ) occurs under retention of configuration yielding P₃N₃Cl₂F₂(NEt₂)₂ and P₃N₃F₄(NEt₂)₂ or P₃N₃F₃(NEt₂)₃, respectively. P₃N₃Cl₆ is nearly quantitatively converted into P₃N₃F₆. Poly(dichlorophosphazene) reacts to a poly(difluorophosphazene), (PNF₂)_n, distinguished by a moderate solubility in THF.     

Use of long-chain alkylamines for preconcentration and determination of traces of molybdenum, tungsten and rhenium by atomic-absorption spectroscopy-II: molybdenum in soils, sediments and natural waters

Molybdenum is extracted as the thiocyanate complex with the quaternary long-chain aliphatic amine Aliquat 336 in chloroform, followed by evaporation of the solvent, dissolution in MIBK, and atomic-absorption spectroscopy. The method is simple, rapid and sensitive, with few interference problems for the determination of the Mo content of soils and sediments in the range 0.1-1.0 ppm with a relative standard deviation better than 5% when 1-g samples are used. Quantitative extraction from large volumes of aqueous solution has also been confirmed, allowing the determination of Mo in natural waters in the ppM range.     

The determination of sulphur in copper,nickel and aluminium alloys by proton activation analysis

The ³⁴S(p, n)^34mCl reaction induced by 13-MeV protons is used for the determination of sulphur in copper, nickel and aluminium alloys. The ^34mCl is separated by repeated precipitation as silver chloride. The results obtained were 3.08 ± 0.47, 1.47 ± 0.17 and <1μg g^-1 for copper, nickel and aluminium alloys, respectively.     

A comparison of SCF-Xα and extended Hückel methods for metal clusters

A comparison of some results from Xα-scattered wave (Xα-SW) and extended Hückel (EH) calculations for metal clusters is given. It is found that small clusters of atoms (≈ 13 atoms) using the Xα-SW method reproduce many of the features of the electronic structure of the bulk metals, whereas this is not the case for the same clusters using the EH method. A more systematic approach to EH parametrizations is suggested in order to make this method a more viable approach to treating metal clusters.     

π-Electron hyperconjugation in organic molecules and ions

The extent of energetic stabilization by alkyl groups with -electron systems via hyperconjugation is investigated theoretically by MINDO molecular orbital calculations. In neutral hydrocarbons, this stabilization represents about 4 % of the effective C-C bond energy, and is additive in the number of alkyl groups present. Calculations for conjugated, polar, and ionic molecules are also discussed.

---

Zusammenfassung Das Ausma\ der energetischen Stabilisierung von -Elektronen-Systemen mit Alkylgruppen durch Hyperkonjugation wird theoretisch durch MINDO-MO-Berechnungen untersucht. In neutralen Kohlenwasserstoffen betrÄgt diese Stabilisierung etwa 4% der effektiven C-C Bindungsenergie und ist additiv entsprechend der Zahl der vorhandenen Alkylgruppen. Berechnungen für konjugierte, polare und ionische Moleküle werden ebenfalls diskutiert.

---

Résumé La méthode des orbitales moléculaires MINDO est utilisée pour calculer le degré de stabilisation par hyperconjugaison entre des groupements alkyles et des systèmes d'électrons . Dans des hydrocarbures neutres cette stabilisation représente environ 4% de l'énergie effective de la liason C-C; elle est additive par rapport au nombre de groupements alkyles. On discute aussi des calculs effectués pour des molécules conjuguées polaires ou ioniques.

     

Zur Kenntnis des Phosphatstoffwechsels der Hefe

Scheinbare Divergenzen zwischen den seinerzeit aufgestellten Phosphatbilanzen in Säureextrakten aus phosphatangereicherter und-verarmter Hefe und den in der letzten Mitteilung dieser Reihe erhobenen Befunden über den Gehalt an freien Nucleotiden in demselben Material, veranlaßten eine genauere Überprüfung der Frage, inwieweit die Extraktionsmethoden die Ergebnisse der Nucleotidbestimmung und der Phosphatbilanzen beeinflussen. Es zeigte sich, daß bei Bestimmung der freien Nucleotide, trotz Verwendung verschiedener Extraktionsmittel, sowohl qualitativ als auch quantitativ weitgehend entsprechende Ergebnisse erhalten wurden.Die Resultate können wieder in dem Sinne erklärt werden, daß während der Phosphatanreicherung eine Synthese von Nucleinsäure auf Kosten der freien Nucleotide erfolgt.Gleichzeitig durchgeführte Phosphatbilanzen in den Säureextrakten aus phosphat-verarmter und-angereicherter Hefe ergaben je nach den Extraktionsbedingungen starke, zur Zeit noch schwer deutbare Konzentrationsunterschiede in den einzelnen Phosphatfraktionen.

---

---

Mit 2 Abbildungen     

Glass open-tubular capillary columns with chemically bonded methyl-phenyl siloxane stationary phases of tailor made polarity

Summary The previously described method yielding apolar, chemically bonded methyl polysiloxane glass capillary columns was extended to the production of capillary systems of controlled polarity. The approach involved prior synthesis of a reactive methyl-phenyl polysiloxane polymer by copolymerisation of a mixture of dimethyl and diphenyl chlorosilanes. The polymer was then chemically bonded to the capillary glass surface to yield remarkably stable, high resolution analytical systems which were shown to be particularly well suited to the separation of biochemical mixtures at the subnanogram level. The principle of copolymerisation of differently substituted silanes confers to the method a considerable flexibility which could be used to devise polar capillary systems tailor made for a given analytical problem.     

Recovery of thick shear bands in atactic polystyrene

The DSC thermograms of the shear band material cut out by a diamond saw to include some undeformed material revealed two T_g's clearly separated by about 10°C. The first T_g was at the same temperature as the T_g of the undeformed material. The second T_g, which was at a higher temperature than the first T_g, appeared shortly after the shear strain recovery during the heating of the shear band material in the DSC. When the shear strain in the shear band was partially reversed by mechanical means before taking the DSC thermogram, the ΔT between the two T_g's decreased and when the shear strain was mechanically reversed to almost zero, the second T_g disappeared. The stored energy of shear band material was found to be similar to that of the bulk compressed material for large strains. Dimensional recovery during heating of specimens with thick and fine bands was similar, both taking place above T_g.     

Dissociation and rate constants of some human liver alcohol dehydrogenase isoenzymes.

ADH from human liver forms binary complexes with NADH, associated with a blue shift of the peak of the fluorescence emission of NADH. The wavelength shift is the same for all isoenzymes but the accompanying intensification of the fluorescence is different. The fluorescence is further increased by the formation of the very tight ternary enzyme-NADH-isobutyramide complexes. These properties are similar to those for the horse liver ADH, as well as the molecular weight of E=40 000 per active site of the dimer molecule (EE). "Stopped-flow" determined velocity constants (ER in equilibrium E+R) were found to be in good agreement with ethanol activity constants previously determined by activity measurement, confirming the validity of the ordered ternary complex mechanism also for the human ADH. No single isoenzyme activity as high as that reported by Mourad and Woronick or Drum has been found.