Imaging Photodissociation Dynamics of MgO at 193 nm

In this work, we used time-sliced ion velocity imaging to study the photodissociation dynamics of MgO at \mbox{193 nm}. Three dissociation pathways are found through the speed and angular distributions of magnesium. One pathway is the one-photon excitation of MgO(X\begin{document}$^1\Sigma^+$\end{document}) to MgO(G\begin{document}$^1\Pi$\end{document}) followed by spin-orbit coupling between the G\begin{document}$^1\Pi$\end{document}, 3\begin{document}$^3\Pi$\end{document} and 1\begin{document}$^5\Pi$\end{document} states, and finally dissociated to the Mg(\begin{document}$^3$\end{document}P\begin{document}$_\textrm{u}$\end{document})+O(\begin{document}$^3$\end{document}P\begin{document}$_\textrm{g}$\end{document}) along the 1\begin{document}$^5\Pi$\end{document} surface. The other two pathways are one-photon absorption of MgO(A\begin{document}$^1\Pi$\end{document}) state to MgO(G\begin{document}$^1\Pi$\end{document}) and MgO(4\begin{document}$^1\Pi$\end{document}) state to dissociate into Mg(\begin{document}$^3$\end{document}P\begin{document}$_\textrm{u}$\end{document})+O(\begin{document}$^3$\end{document}P\begin{document}$_\textrm{g}$\end{document}) and Mg(\begin{document}$^1$\end{document}S\begin{document}$_\textrm{g}$\end{document})+O(\begin{document}$^1$\end{document}S\begin{document}$_\textrm{g}$\end{document}), respectively. The anisotropy parameters of the dissociation pathways are related to the lifetime of the vibrational energy levels and the coupling of rotational and vibronic spin-orbit states. The total kinetic energy analysis gives \begin{document}$D_0$\end{document}(Mg\begin{document}$-$\end{document}O)=21645\begin{document}$\pm$\end{document}50 cm\begin{document}$^{-1}$\end{document}.     

Fast Fabrication and Judgement of Tip-Enhanced Raman Spectroscopy-Active Tips

The quality of the scanning tip is crucial for tip-enhanced Raman spectroscopy (TERS) experiments towards large signal enhancement and high spatial resolution. In this work, we report a controllable fabrication method to prepare TERS-active tips by modifying the tip apex at the atomic scale, and propose two important criteria to in-situ judge the tip's TERS activity for tip-enhanced Raman measurements. One criterion is based on the downshift of the first image potential state to monitor the coupling between the far-field incident laser and near-field plasmon; the other is based on the appearance of the low-wavenumber Raman peaks associated with an atomistic protrusion at the tip apex to judge the coupling efficiency of emissions from the near field to the far field. This work provides an effective method to quickly fabricate and judge TERS-active tips before real TERS experiments on target molecules and other materials, which is believed to be instrumental for the development of TERS and other tip-enhanced spectroscopic techniques.     

三唑环修饰的苯并菲二羧酸酯和酰亚胺: 合成、液晶及凝胶性

在盘状液晶分子外围柔性链中引入功能不同的基团, 是设计和合成具有良好液晶性能化合物的常用策略. 本工作从苯并菲2,3-二甲酸和酸酐出发, 通过亲核取代和点击反应, 分别合成了两类三唑环修饰的苯并菲二羧酸酯和苯并菲酰亚胺化合物. 热重分析仪(TGA)测试表明, 新制备的主要中间产物与目标化合物失重为5%时的温度在274~389 ℃之间, 均表现出良好的热稳定性. 我们通过差示扫描量热法(DSC)、偏光显微镜(POM)和变温X射线衍射(XRD)实验对这些化合物的热力学行为和介晶性进行了研究. 除三唑环修饰的酯3a和3b无液晶性外, 主要中间产物(2和5)与三唑环修饰的酰亚胺产物(6a和6b)均有一个六方柱状液晶相. 此外, 制备的以三唑为桥联基团的酰亚胺二聚体10为室温液晶, 具有173 ℃的液晶范围. XRD证实了该二聚体中存在有序度不同的两种柱状液晶相(Col_h1和Col_h2). 另外, 由于三唑环的引入, 三唑环修饰的酯类和酰亚胺两类化合物在某些有机溶剂中都能形成有机凝胶. 其中, 二聚体10在1,2-二氯乙烷和1,4-二氧六环中表现出优异的凝胶能力, 其临界凝胶浓度(CGC)可低至1 mg/mL. 相比之下, 不含三唑环的中间产物2和5则不能形成凝胶, 表明三唑环之间的偶极-偶极作用和液晶刚性核π-π堆积的协同作用对于超分子凝胶的形成起着重要的作用. 因此, 同时表现出液晶和凝胶性质的三唑环修饰的苯并菲2,3-二酰亚胺分子具有成为一种多功能材料的潜在应用价值.     

Synthesis and Antibacterial Activity of Selenium-functionalized Poly(ε-caprolactone)

A selenium-functionalizedε-caprolactone was synthesized by introducing a phenyl selenide group at the 7-position.A polymer was obtained through the ring-opening polymerization of this monomer in a base/thiourea binary organocatalytic system.A living polymerization process was achieved under mild conditions.The resulting polymers had a controlled molecular weight with a narrow molecular weight distributions and high end-group fidelity.Random copolymers could be obtained by copolymerizing this monomer withε-caprolactone.The thermal degradation temperature of the obtained copolymers decreased with the increasing molar ratio of selenide functionalized monomer in copolymers,while the glass transition temperature increased.In addition,the phenyl selenide side group could be further modified to a polyselenonium salt,which resulted in a polymer with good antibacterial properties.The survival rate of E.coli and S.aureus was only 9%with a polymer concentration of 62.5μg/mL.     

Ni基乙烷脱氢催化剂的性能及其改进

过渡金属Ni是地球上储量丰富的金属元素, 在加氢脱硫、重整制氢等催化领域应用非常广泛, 但是关于Ni基催化剂在烷烃脱氢方面的研究较少; 因此, 本工作采用不同的方法, 制备了三种结构的Ni基负载催化剂, 即尖晶石分解型、浸渍型和钙钛矿析出型, 并在700 ℃、C₂H₆-N₂气氛中和50 mL•min^-1气体流速下, 探索了它们的乙烷脱氢性能. 结果表明: 尖晶石分解型催化剂Ni_1-xCu_xCr₂O₄还原后在Cr₂O₃表面形成Ni-Cu合金颗粒, 能有效钝化Ni的C—C键断裂活性, 提高乙烯的选择性. Ni含量过高时, Ni不能有效地分散而形成大的金属团簇, 造成乙烷过度裂解, 乙烯选择性较低. 浸渍负载型催化剂Ni_xM_y/Al₂O₃ (M为Cu或Ag) 比表面积大, 表面活性位点分散, 但活性金属与载体结合力弱, 在高温下不稳定; Cu或Ag与Ni形成合金, 可有效提高乙烯选择性, Ag较Cu的效果更佳. 钙钛矿析出型催化剂LaCr_1-xNi_xO₃(LCNi-100x)在还原气氛中析出均匀细小的Ni颗粒, 其与基体结合力强, 抗积碳性能和稳定性较高; 含15% Ni的LCNi-15还原后(R-LCNi-15)表现出最好的催化性能, 乙烯产率最高(24%), 同时具有较好的抗积碳性能和稳定性以及氧化再生性.     

A(15)Tl(27) (A = Rb, Cs): A Structural Type Containing Both Isolated Clusters and Condensed Layers Based on the Tl(11) Fragment. Syntheses, Structure, Properties, and Band Structure

The isomorphous title compounds (and the ordered substitutional Rb(14)CsTl(27)) are obtained directly from reactions of the elements in sealed Ta below approximately 330 degrees C. Refinements of single-crystal data for the three established a structure with alternate layers of isolated pentacapped trigonal prismatic Tl(11)(7)(-) (D(3)(h)()) ions and condensed [Tl(16)(8-)] networks that are separated by cations. The condensed layer consists of Tl(11) units that share prismatic edges and are interbridged through waist-capping atoms (Tl(6/2)Tl(3)Tl(2)). (Rb(15)Tl(27): P&sixmacr;2m, Z = 1, a = 10.3248(6) ?, c = 17.558(2) ?.) The rubidium phase is a poor metal (rho(293) approximately 34 &mgr;Omega.cm) and is Pauli-paramagnetic. Extended Hückel band calculations indicate partially filled bands and a non-zero DOS at E(F), consistent with the observed metallic behavior, although appropriate cation tuning or modest anion doping should provide a Zintl phase. The band structure and COOP curves are also used to rationalize the distortion of the Tl(11) unit on condensation and the critical role of the interfragment bonds between waist-capping atoms in stabilizing the layer.     

钯-膦-酸体系催化烯烃氢酯基化反应研究进展

烯烃氢酯基化反应是羰基合成领域的重要分支之一,长期以来一直备受关注。目前已发展了钯基、铑基、钴基、钌基等众多催化体系,其中钯-膦-酸催化体系因具有反应条件温和、底物普适性良好、催化性能优异等优点而得到最广泛、最深入的研究。因此,我们对均相、非均相的钯-膦-酸催化体系在烯烃氢酯基化反应中的研究应用进行了简要综述,并对催化机理、催化剂组成和性能进行讨论,最后指出稳定性高、可回收性好的非均相钯-膦-酸催化体系将是该领域的研究重点。     

基于半刚性配体的柔性超微孔金属有机骨架的合成及其尺度选择性二氧化碳捕获

基于半刚性的配体3′,5′-di(1H-1,2,4-triazol-1-yl)-(1,1′-biphenyl)-3,5-dicarboxylic acid (H₂DTBDA)和硝酸钴制备了一个柔性超微孔的金属有机骨架{[Co(DTBDA)]·4H₂O}_n (FJI-H35),并对该材料的结构进行了系统的表征。FJI-H35活化以后可以发生自适应的结构转变,使得孔径从0.43 nm收缩到0.37 nm。气体吸附测试表明FJI-H35可以从氮气和甲烷中选择性捕获二氧化碳,具有很高的吸附选择性和相对低的吸附焓。突破实验进一步证实FJI-H35可以从二氧化碳/氮气(15∶85,V/V)和二氧化碳/甲烷(50∶50,V/V)混合气中高效选择性捕获二氧化碳。     

Sorption and desorption of radiostrontium on calcareous soil and its solid components

The effect of different solid components of calcareous soil on the retention of Sr was investigated by using batch technique and selective extraction method. The sorption and desorption isotherms of Sr on the untreated calcareous soil and the three treated soils were determined at 20°C, pH 7.8±0.2 and in the presence of 0.001 M CaCl₂. It was found that all isotherms are linear and that the sorption of Sr on the calcareous soil can be described by a reversible sorption process and the sorption mechanism is mainly ion exchange.     

利用空间位阻和氢溢流协同作用促进5-羟甲基糠醛选择性加氢制备5-甲基糠醛

化学工业生产中,用氢气为还原剂,通过选择性加氢可以制备多种重要化学品。5-羟甲基糠醛是重要的生物质基平台化合物,而5-甲基糠醛是用途广泛的化学品。由5-羟甲基糠醛加氢得到5-甲基糠醛是一条非常理想的路径,但是选择性活化C-OH非常困难。本文设计并制备了Pt@PVP/Nb₂O₅(PVP: 聚乙烯吡咯烷酮)催化剂,该催化体系巧妙地结合了位阻效应、氢溢流和催化剂界面的电子效应,系统研究了该催化剂对5-羟甲基糠醛选择性加氢制备5-甲基糠醛催化性能,在最优条件下,5-甲基糠醛的选择性可达92%。利用密度泛函理论计算研究了5-羟甲基糠醛选择性加氢制备5-甲基糠醛反应路径。