Ruthenium nanoclusters anchored on cobalt phosphide hollow microspheres by green phosphating process for full water splitting in acidic electrolyte

Transition metal phosphide(TMP) based electrocatalysts possessing special crystal and electronic structures attract broad attention in the field of electrocatalysis.Immense effort is made to optimize TMP catalysts aiming to satisfy the electrochemical catalysis performance.In this work,an environmentally friendly in situ green phosphating strategy and spatial limiting effect of the RuCo precursor is employed to fabricate the ruthenium nanoclusters anchored on cobalt phosphide hollow microspheres(Ru NCs/Co₂P HMs).The obtained Ru NCs/Co₂P HMs electrocatalysts exhibit high hydrogen evolution reaction(HER) activity at wide pH ranges,which require an overpotential of 77 mV to achieve the current density of 10 mA/cm² in 0.5 mol/L H₂SO₄ and 118 mV in 1.0 mol/L KOH.Besides,the multifunctional Ru NCs/Co₂P HMs exhibit good oxygen evolution reaction(OER) activity with an overpotential of 197 mV to reach the current density of 10 mA/cm² in 0.5 mol/L H₂SO₄,which is below that of the commercial RuO₂ electrocatalyst(248 mV).A two-electrode electrolyzer is assembled as well,in acid electrolyte,it achieves a current density of 10 mA/cm² at a voltage of 1.53 V,which is superior to that of the benchmark of precious metal-based electrolyzer(1.58 V).     

Study on LiFe<Subscript>1 − <Emphasis Type="Italic">x</Emphasis></Subscript>Sm<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>PO<Subscript>4</Subscript>/C used as cathode materials for lithium-ion batteries with low Sm component

LiFe_1???x Sm _x PO₄/C cathode materials were synthesized though a facile hydrothermal method. Compared with high-temperature solid-phase sintering, the method can allow for the fabrication of low Sm content (2 %), a scarce and expensive rare earth element, while the presence of an optimized carbon coating with large amount of sp²-type carbon sharply increases the material’s electrochemical performance. The high-rate dischargeability at 5 C, as well as the exchange current density, can be increased by 21 and 86 %, respectively, which were attributed to the fine size and the large cell parameter a/c as much. It should be pointed out that the a/c value will be increased for the LiFePO₄ Sm-doped papered by both of the two methods, while the mechanism is different: The value c is increased for the front and the value a is decreased for the latter, respectively.     

miR-98 suppresses melanoma metastasis through a negative feedback loop with its target gene IL-6

Dysregulated microRNA (miRNA) expression has a critical role in tumor development and metastasis. However, the mechanism by which miRNAs control melanoma metastasis is unknown. Here, we report reduced miR-98 expression in melanoma tissues with increasing tumor stage as well as metastasis; its expression is also negatively associated with melanoma patient survival. Furthermore, we demonstrate that miR-98 inhibits melanoma cell migration in vitro as well as metastatic tumor size in vivo. We also found that IL-6 is a target gene of miR-98, and IL-6 represses miR-98 levels via the Stat3-NF-κB-lin28B pathway. In an in vivo melanoma model, we demonstrate that miR-98 reduces melanoma metastasis and increases survival in part by reducing IL-6 levels; it also decreases Stat3 and p65 phosphorylation as well as lin28B mRNA levels. These results suggest that miR-98 inhibits melanoma metastasis in part through a novel miR-98-IL-6-negative feedback loop.     

Experimental research of effects of different rotation radii on the growth rate of potassium dihydrogen phosphate crystals

Comparing with the traditional concentric rotation method (rotation radius is 0 cm), the effects of different rotation radii on the growth rate of KDP crystals were studied by experimental methods. It was found that with the increase of rotation radius from 0 cm, the growth rate of each direction of crystals first increased and then decreased in a size‐unchanged vessel. The smaller the distance between the crystal and vessel wall, the less the growth rate. This phenomenon was named the “wall collision effect”. Also, the value of growth rate reached a maximum when the rotation radius was about half of its allowable largest value in the size‐unchanged vessel. In addition, an increase of the rotation radius could improve the crystal growth rate under the same linear velocity of crystal movement. Finally, the uniformity of crystal growth has also been analyzed compared with the concentric rotation radius. It was found that the uniformity of crystal growth was best when the rotation radius was half of its allowable maximum value, and it was more conducive to the actual application of KDP crystals.     

AgI Microplate Monocrystals with Polar {0001} Facets: Spontaneous Photocarrier Separation and Enhanced Photocatalytic Activity

Elucidating the facet‐dependent photocatalytic activity of semiconductor photocatalysts is important in improving the overall efficiency of photocatalysis. Furthermore, combining facet control with selective deposition of oxidation and/or reduction cocatalysts on specific faces of semiconductor photocatalysts is potentially an effective strategy to synergistically optimize the functionality of photocatalysts. In the present study, high‐purity wurtzite‐type β‐AgI platelet microcrystals with polar {0001} facets were prepared by a facile polyvinylpyrrolidone‐assisted precipitation reaction. The polar‐faceted AgI microplates were used as archetypes to demonstrate preferential diametric migration (i.e., effective separation) of photogenerated electrons and holes along the c axis. Such vectorial electron–hole separation stems from the asymmetric surface structures, which give rise to distinct photoexcited reaction behaviors on the ±(0001) polar facets of wurtzite‐type semiconductors. Furthermore, on selective deposition of Ag and MnO_x (1.5<x<2) cocatalysts on the reductive (0001) and oxidative (000$\bar 1$ ) facets, respectively, photocatalytic activity of the AgI microplates in degrading organic pollutants was dramatically enhanced thanks to the broad light‐absorption range, strong dye‐adsorption ability, and effective spatial separation of photocarriers.     

Dispersion of T1 and T2 Nuclear Magnetic Resonance Relaxation in Crude Oils

Crude oils, which are complex mixtures of hydrocarbons, can be characterized by nuclear magnetic resonace diffusion and relaxation methods to yield physical properties and chemical compositions. In particular, the field dependence, or dispersion, of T₁ relaxation can be used to investigate the presence and dynamics of asphaltenes, the large molecules primarily responsible for the high viscosity in heavy crudes. However, the T₂ relaxation dispersion of crude oils, which provides additional insight when measured alongside T₁, has yet to be investigated systematically. Here we present the field dependence of T₁‐T₂ correlations of several crude oils with disparate densities. While asphaltene and resin‐containing crude oils exhibit significant T₁ dispersion, minimal T₂ dispersion is seen in all oils. This contrasting behavior between T₁ and T₂ cannot result from random molecular motions, and thus, we attribute our dispersion results to highly correlated molecular dynamics in asphaltene‐containing crude oils.     

N-烷基丙烯酰胺温敏聚合物合成研究进展

聚N-烷基丙烯酰胺因表现出温度敏感的特殊性能而成为高分子领域的研究热点,具有非常好的应用潜力。本文评述了线性和聚凝胶化N-烷基丙烯酰胺温敏聚合物的合成研究进展,分别介绍了水溶液自由基聚合合成线性N-烷基丙烯酰胺温敏聚合物的研究进展和化学交联、物理交联、辐射交联聚合凝胶化N-烷基丙烯酰胺温敏聚合物的合成研究进展,并对线性温敏聚合物和凝胶化文敏聚合物合成方法优缺点、单体选择、应用范围进行了讨论。