铝基复合材料中不同形态碳分析方法的研究

本文研究铝基复合材料中碳元素不同存在形式（总碳、游离碳、碳化硅）的检测方法。 采用高频感应燃烧红外法测定总碳（2.00%～6.00%）,酸溶过滤分离-高频红外法测定游离碳（0.10%～1.50%）,重量法测定碳化硅(1%～35%)的含量。以上三个方法的精密度试验RSD%（n=8）最大分别为4.2%、1.2%、0.51%,测定游离碳和碳化硅(SiC)样品的加标回收率分别是98.5%～100.2%,99%～101%。 这三种方法都快速、可靠,已应用于铝基复合材料的实际分析工作中。     

用平行双样测定结果相对偏差限值评估方法验证实验重复性限合理性的研究

分析方法标准验证实验得到的分析方法基本性能参数重复性限和再现性限是日常检测工作质控规范重要依据。以环境监测领域土壤、沉积物及固废样品中无机元素分析为例,考察了已颁布执行的标准文本和在生态环境部官网公开征求意见的分析方法标准中重复性限。将重复性限转化为相对偏差后,与日常检测工作中质控限值进行了比较。根据目前现行有效的平行双样测定结果相对偏差限值,方法验证数据有多大比例符合质控要求？根据方法验证结果,平行双样测定结果相对偏差限值有无改进可能？从上述两个角度进行了研究。研究结果表明：土壤、沉积物、固体废弃物中无机元素的测定,不同文献来源相同分析方法标准和不同分析方法标准,其重复性限转化得到的平行测定相对偏差合格率存在明显区别;用平行测定相对偏差限值可以快速判断标准文本中的重复性限是否合理,审核方法验证数据质量是否满足要求。基于已有标准文本方法验证数据,探讨了修改平行测定结果相对偏差限值可行性。     

Co-POM@MOF-derivatives with trace cobalt content for highly efficient oxygen reduction

A simple and effective method for constructing highly efficient oxygen reduction catalysts with trace amount of isolated cobalt was firstly developed by the pyrolysis of Co-centered polyoxometalate@metalorganic framework （Co-POM@MOF）.The Co-centered polyoxometalate ([Co W₁₂O₄₀]^6-) was confined in the well-defined void space of ZIF-8 to achieve homogeneous dispersion of polyoxoanions,where the isolated Co centers were well surrounded by the W-O shell and ZIF-8 fra...     

Ovalbumin-stabilized gold nanoclusters with ascorbic acid as reducing agent for detection of serum copper

Ovalbumin-stabilized gold nanoclusters(OVA@AuNCs) were prepared with ascorbic acid as a reducing agent. This strategy could realize the synthesis of water-soluble OVA@AuNCs within 20 min. The asprepared fluorescent probe showed a red fluorescence emission at 630 nm. Moreover, the properties of the OVA@AuNCs were characterized by transmission electron microscope, dynamic light scattering,ultraviolet-visible spectroscopy, fluorescent spectroscopy. Based on the surface electron density decrease-induced fluorescence quenching mechanism, the OVA@AuNCs provided high sensitivity and selectivity for sensing copper ions. A good linear relationship was obtained between the fluorescence intensity of OVA@AuNCs and the concentration of copper ions in the range of 5.0-100.0 μmol/L(R~2=0.999) with a detection limit of 640 nmol/L Furthermore, the rat serum copper contents were determined by using the OVA@AuNCs based assay, indicating great potential of fluorescent probes for application in biological and clinical analysis.     

Optimization and Validation of a Headspace Solid-Phase Microextraction with Comprehensive Two-Dimensional Gas Chromatography Time-of-Flight Mass Spectrometric Detection for Quantification of Trace Aroma Compounds in Chinese Liquor (Baijiu)

The detection of trace aroma compounds in samples with complex matrices such as Chinese liquor (Baijiu) requires a combination of several methods, which makes the analysis process very complicated. Therefore, a headspace solid-phase microextraction (HS-SPME) method coupled with two-dimensional gas chromatography time-of-flight mass spectrometry (GC×GC-TOFMS) was developed for the quantitation of a large number of trace compounds in Baijiu. Optimization of extraction conditions via a series of experiments revealed that dilution of the alcohol content of 8 mL of Baijiu to 5%, followed by the addition of 3.0 g of NaCl and subsequent SPME extraction with DVB/CAR/PDMS fiber coating over 45 min at 45 °C was the most suitable. To check the matrix effects, various model Baijiu matrices were investigated in detail. The quantitative method was established through an optimized model synthetic solution, which can identify 119 aroma compounds (esters, alcohols, fatty acids, aldehydes and ketones, furans, pyrazines, sulfur compounds, phenols, terpenes, and lactones) in the Baijiu sample. The developed procedure provided high recovery (86.79–117.94%), good repeatability (relative standard deviation < 9.93%), high linearity (R² > 0.99), and lower detection limits than reported methods. The method was successfully applied to study the composition of volatile compounds in different types of Baijiu. This research indicated that the optimized HS-SPME–GC×GC-TOFMS method was a valid and accurate procedure for the simultaneous determination of different types of trace compounds in Baijiu. This developed method will allow an improved analysis of other samples with complex matrices.     

水稻分蘖期无人机高光谱影像混合像元特征分析与分解

开展水稻无人机高光谱解混,获取水稻植株的高光谱反射率信息,对于提高水稻理化参量的反演模型精度具有重要意义.目前大多基于高光谱遥感影像自身数据进行解混,运用算法模型进行高光谱数据解混,将高光谱图像和可见光图像进行优势互补,提出一种基于无人机高清影像与高光谱遥感影像融合的稻田无人机高光谱解混方法,解决单一数据局限性问题,增...     

铜锌锡硫薄膜材料及其器件应用研究进展

铜锌锡硫薄膜材料组成元素储量丰富, 环境友好, 成本低廉, 成为最具前景的薄膜材料之一. 目前, Cu₂ZnSn(S, Se)₄ (CZTSSe)薄膜太阳电池的最高转换效率已经达到12.6%. 本文总结了Cu₂ZnSnS₄ (CZTS)的发展历史, 依次介绍了CZTS薄膜材料的结构特性、光学特性、电学特性、界面特性和Na对CZTS 薄膜的影响, 详细介绍了CZTS薄膜的制备方法及器件应用的最新研究进展, 总结了目前CZTS薄膜太阳电池发展中存在的问题, 展望了今后的研究方向.     

应用分子动力学模拟和拉曼光谱对钙、镁、氯离子 水化现象的研究

应用分子动力学方法,模拟了298 K下,密度为1.0 g/cm~3的水溶液中Ca²⁺,Mg²⁺,Cl~-的水化现象,得到了相应离子周围水分子的微观分布情况.发现在钙离子周围,水分子以其氧离子去靠近中心离子;而在氯离子周围,水分子则以其中的一个氢原子去靠近中心离子.通过分析三种离子的径向分布函数、配位数曲线、水化数、水化半径,发现Ca²⁺的水化数和水化半径均大于Mg²⁺,即Ca²⁺的水合能力比Mg²⁺强.与以往研究结果相比,本文计算所得的自扩散系数更接近实验所得结果.为了使模型更好的代表真实水溶液体系,本文还应用分子动力学和拉曼光谱法研究了不同浓度的CaCl₂水溶液.分子动力学研究发现随着浓度的升高,CaCl₂溶液中Ca²⁺,Cl~-的配位数分别呈降低趋势.同时,随着浓度的升高,Ca²⁺,Cl~-的自扩散系数也呈现降低的趋势.作者推断这是由于浓度的升高,加剧了离子的微观反...     

Cu50Ni50合金快速凝固的分子动力学模拟

采用分子动力学模拟的方法研究了Cu₅₀Ni₅₀合金在不同冷却速度下的凝固过程,利用均方位移、径向分布函数和结构可视化等方法分析其微观结构.并对凝固模型进行拉伸模拟,通过应力应变曲线和直观结构变化分析其性能.研究表明：冷却速度对Cu₅₀Ni₅₀合金凝固形成的结构有较大影响,随着冷却速度的升高,凝固形成的结构中晶体含量减少,在较低的冷却速度下,如冷却1×10¹²K/s时,Cu₅₀Ni₅₀合金凝固形成晶体结构;在较高的冷却速度下,如1×10¹⁴K/s时,Cu₅₀Ni₅₀合金凝固形成非晶体结构,且非晶Cu₅₀Ni₅₀合金的抗拉性能要优于晶体Cu₅₀Ni₅₀合金.     

静水压对立方钙钛矿CsSnX3(X=I, Br, Cl)光电性质的第一性原理探究

全无机无铅卤化物钙钛矿已经成为重要的新一代太阳能电池材料.采用密度泛函理论的第一性原理研究了不同静水压下CsSnX₃(X=I, Br, Cl)材料的晶体结构,电子结构和光学性能,并分析了其内在联系.结果表明施加静水压可使材料中Sn-X键长减小,使原子之间的耦合增强,带隙值减小,且随着卤族元素半径的增大,压力效应越明显;随着压力的增加,材料的吸收系数和复折射率增大,吸收光谱出现红移现象,在可见光区和近红外光区吸收增强.相比CsSnBr₃和CsSnCl₃,CsSnI₃在可见光区吸收最佳且受压力作用影响最小,更适用于钙钛矿太阳能电池材料.