Photochemical Reaction of Decacarbonyldirhenium with Thiophene and Crystal Structure of Tetradecacarbonylhydridotrirhenium

The photochemical reaction of Re₂(CO)₁₀ with thiophene in hexane solution was investigated under vacuum. Three rhenium clusters: H₂Re₃(CO)₁₂, HRe₃(CO)₁₄ and Re₃(CO)₁₄(OH)₄, were isolated. The structure of Fellmann-Kaesz cluster Complex HRe₃(CO)₁₄ was determined by use of the X-ray diffraction method. The three rhenium atoms form a plane of symmetry and L: Re₁Re₂Re₃ is 107°. The ten carbonyl groups bonded to the two terminal rhenium atoms Re₁ and Re₃, are staggered with respect to the central rhenium atoms. The bond lengths are 3.10 Å for Re₂-Re₃ and 3.34 Å for Re₁-Re₂. The bridging hydride is between Re₁ and Re₂.     

Adiabatic cooling of ions in the penning trap

An ion cloud in a Penning trap can be cooled by adiabatic expansion by reducing the trap's magnetic and electric fields. We treat the ion cloud as a classical gas and obtain the relations between the temperature and the trapping fields. This cooling method may be useful in trapping and cooling of antiprotons with the aim of measuring the gravitational accleration of anti-protons and other experiments on heavy ions.     

Electrostatic layer-by-layer assembled carbon nanotube multilayer film and its electrocatalytic activity for O2 reduction

Multilayer films of shortened multiwalled carbon nanotubes (MWNTs) are homogeneously and stably assembled on glassy carbon electrodes with the layer-by-layer (LBL) method, based on electrostatic interaction of positively charged poly(diallyldimethylammonium chloride) and negatively charged and shortened MWNTs. The film assembly and electrochemical property as well as the electrocatalytic activity toward O2 reduction of the MWNT multilayer film are studied. Scanning electron microscopy, the quartz crystal microbalance technique, ultraviolet-visible-near-infrared spectroscopy, and cyclic voltammetry are used for characterization of film assembly. Experimental results revealed that film growth is uniform, almost with the same coverage of the MWNTs in each layer, and that the assembled MWNTs are mainly in the form of small bundles or single tubes on the electrodes. Electrochemical studies indicate that the LBL assembled MWNT films possess a remarkable electrocatalytic activity toward O2 reduction in alkaline media. This property, combined with the well-dispersed, porous and conductive features of the MWNT film illustrated with the LBL method, suggests the potential application of the MWNT film for constructing an efficient alkaline air electrode for energy conversions.     

X射线荧光光谱(XRF)法测定绿泥石中镁、铝、硅、磷、钾、钙、钛、铁元素含量

建立了X射线荧光光谱法测定绿泥石中镁、铝、硅、磷、钾、钙、钛、铁元素含量的快速分析方法。以标准物质及标准物质与基准试剂氧化镁、氧化钙人工混合配制标样的方法建立标准工作曲线,重点讨论了熔剂和脱模剂的选取。最佳熔样条件：采用8.0g四硼酸锂和偏硼酸锂混合熔剂(质量比67: 33)+0.8g样品并添加溴化锂作为脱模剂,熔样温度1100℃,熔样时间10min。该方法相对标准偏差(n=12)均小于5.57%,绿泥石样品测定结果与化学法一致,硅酸盐标准物质测定结果均满足不确定度要求。     

粉末压片-X荧光光谱法测定过磷酸钙中硫含量

硫是过磷酸钙中重要营养指标之一,为准确快速测定过磷酸钙中硫的含量,试验采用粉末压片-X荧光光谱法,将过磷酸钙试样充分干燥后研磨至粒度小于74 μm,采用硼酸镶边,在压力18 Mpa条件下保压30 s,制成样片。通过在过磷酸钙样品中添加不同质量的纯物质硫酸钙（质量分数范围1.52 %～17.21 %）,经过专用混匀设备混合均匀后,与试样压片相同条件下压制标准样片,作为过磷酸钙中硫的标准样品,建立硫标准曲线,曲线线性相关系数R2为0.9995,采用经验系数法校正干扰,建立了粉末压片-波长色散X射线荧光光谱法测定过磷酸钙中硫含量的方法, 方法检出限为0.002 %。对3个不同硫含量的过磷酸钙样品采用本实验方法重复测量7次,RSD在1.4 %~3.1 %,方法精密度性好,同时用高温燃烧红外光谱法和电感耦合等离子发射光谱法对比,三者测量结果相对极差小于2.0 %,测量结果无显著性差异。此方法不需要对样品进行熔融或溶解,样品制备简单,数据准确度和稳定性好,分析效率高,适合大批量样品中硫的测定。