Quantum chemical studies on electrophilic addition

The geometries of the 2-chloroethyl and ethylenechloronium cations, two possible intermediates in the electrophilic addition of chlorine to ethylene, have been fully optimized using ab initio molecular orbital calculations employing the split valence shell 4-31G basis set.These geometries were then used to compute more accurate wave functions using Dunning's double-zeta basis set. The bridged chloronium ion was found to be more stable by 9.35 kcal/mole, the opposite order of stability from the C₂H₄F⁺ ions. Interconversion of the two C₂H₄Cl⁺ cations was computed to have a barrier of 6.25 kcal/mole.The activation energy for this chlorination reaction, using the ethylenechloronium cation and a chlorine anion at infinite separation as the model for the activated complex, was computed to be 128.7 kcal/mole, showing that this is not a feasible gas phase reaction.     

Synthesis and Crystal Structure of Two One—dimensional Chain Copper Complexes [Cu（TTA）2（4,4‘’—azpy）] and [Cu（TTA）2（3,3‘’—azpy）

Two copper complexes [Cu(TTA)₂(4,4′‐azpy)] (1) and [Cu‐(TTA)₂(3,3′‐azpy)] (2) (HTTA = 1,1,1‐trifluoro‐3‐(2‐thenoyl)‐acetone, 4,4′‐azpy = 4,4′‐azobispyridine, 3,3′‐azpy = 3,3′‐azobispyridine) were synthesized and characterized. The crystal structures were determined by X‐ray diffraction analysis. The crystal 1 belongs to triclinic with space group P1 , a = 0.8515(2) nm, b = 0.9259(2) nm, c = 0.9468(2) nm, a = 66.126(9)°, β = 79.667(9)°, γ = 90.13(1)°, Z = 1, V = 0.6692(2) nm³, D_c = 3.425 g/cm³, γ = 2.113 mm^?1, F(000) = 694, R₁ = 0.0594, wR₂ = 0.1499. The crystal 2 belongs to monoclinic with space group P2₁/c, a = 1.0661(2) nm, b = 1.4296(3) ran, c = 1.0041(3) nm, β = 114.50(3)°, V = 1.3926(5) nm³, Z = 2, D_c = 1.646 g/ cm³, μ = 1.015 mm^?1, F(000) = 694, R₁, = 0.0535, wR₂ = 0.1113. In the crystals of complexes 1 and 2, the copper atoms have distorted octahedral symmetry. The two compounds possess very similar one‐dimensional linear chains linked through the rodlike 4,4′‐azpy ligands or 3,3′‐azpy ligands.     

非晶态Co-B的局域电子结构的X_α原子簇计算

金属玻璃TM-Met(TM为过渡金属原子,Met为类金属原子,如硼、磷等)由于其优异性能已成为非晶态研究的重要课题之一。实验研究表明,类金属原子与过渡金属原子构成非晶态合金(即金属玻璃)后,平均原子磁矩随Met的含量在一定范围内的变化呈线性下降关系.相当多的文献用“电荷转移刚性能带”模型来解释.认为金属玻璃的能带是     

Synthesis, Crystal Structure, Properties and Thermoanalysis of Complexes of Cu（Ⅱ） and Ni（Ⅱ） with Taurine-5-chlorosalicylaldelyde Schiff Base

The reactions of transition metal salts with taurine 5‐chlorosalicylaldelyde Schiff base gave two complexes [Ni(TCSSB)(H₂O)₃].H₂O (1) and [Cu(TCSSB)(H₂O)₂]₂[Cu(TCSSB)₂].6H₂O (2) (TCSSB=taurine‐5‐chlorosalicylaldelyde Schiff base), which were characterized by elemental analysis and X‐ray diffraction analysis. The complex 1 crystallized in monoclinic system with space group P2 ₁/c, and a=1.4816(2) nm, b=1.3953(2) nm, c= 0.7466(1) nm, β= 100.499(3)°, V=1.5176(4) nm³, Z=4, and an infinite 3‐D network structure was formed by hydrogen bonds among sulfo group, crystal water and coordinated water. Complex 2 crystallized in triclinic system with space group P1 , with the cell parameters: a = 0.6413(2) nm, b= 1.4596(3) nm, c= 1.6188(4) nm, a= 102.473(5)°, β= 98.979(4)°, γ=101.739°, V=1.4165(6) nm³, Z=1. The coordination environment between Cu(1) and Cu(2) is different. Cu(1) is slightly distorted square pyramidal while Cu(2) is distorted square‐plane. The complex 1 is mononuclear while the complex 2 is made up of two coordinated subunits, namely [Cu(TCSSB)₂] and [CU(TCSSB)(H₂O)₂]₂. Besides that the TG‐DTG of the complex 1 was analyzed, the thermal decomposition reaction of the complex was studied under a non‐isothermal condition by TG‐DTG. The TG and DTG curves indicate that the complex was decomposed in three stages: .     

Isolation of a potent anti-MRSA sesquiterpenoid quinone from Ulmus davidiana var. japonica

A highly potent anti-MRSA sesquiterpenoid has been isolated from Ulmus davidiana var. japonica, which has been traditionally used to treat infectious diseases in Korea. This naturally occurring antibiotic was identified as mansonone F (1). This compound has been found to be highly active specifically against MRSA and showed an MIC range of 0.39-3.13 microg/ml which is comparable to that of vancomycin.     

阳离子交换柱分离-导数光度法测定原油中钒

以 5Br PADAP为显色剂 ,用阳离子交换柱分离干扰离子 ,在波长 6 30nm采用一阶导数光度法测定原油中钒 ,方法灵敏度高 ,摩尔吸光系数为 3.0× 10 5L·mol- 1·cm- 1,较其它光度法测定钒的摩尔吸光系数提高 1～ 2个数量级。对实际样品进行分析并做加标回收试验 ,钒的回收率在97.5 %～ 10 4 .0 %。与ICP AES方法进行对照试验 ,结果相吻合。     

千克级窄分子质量分布聚苯乙烯的制备与表征

以正丁基锂为引发剂，以经过处理的工业级环己烷为溶剂、四氢呋喃为促进剂，用阴离子聚合的方法，在常压和惰性气体保护条件下，制得一系列千克级窄分子质量分布的聚苯乙烯，利用IR、^1H-NMR、GPC等技术对聚苯乙烯产物进行了表征，分析了影响聚苯乙烯的分子质量及分子质量分布的因素。     

Synthesis of perfluoroalkyl-containing multifunctional groups compounds for textile finishing

A new kind of perfluoroalkyl-containing multifunctional groups compound was designed. Treatment of 1H,1H,2H,2H-perfluorooctyltrichlorosilane (4) with allylmagnesium bromide provided key intermediate 1H,1H,2H,2H-perfluorooctyltriallylsilane (2). Hydroboration followed by oxidation, epoxidation and dihydroxylation of 2 gave perfluoroalkyl-containing multifunctional groups compound 1a, 1b and 1c, respectively.     

Amperometric Glucose Biosensor Based on Glucose Oxidase Encapsulated in Carbon Nanotube–Titania–Nafion Composite Film on Platinized Glassy Carbon Electrode

A highly sensitive and selective glucose biosensor has been developed based on immobilization of glucose oxidase within mesoporous carbon nanotube–titania–Nafion composite film coated on a platinized glassy carbon electrode. Synergistic electrocatalytic activity of carbon nanotubes and electrodeposited platinum nanoparticles on electrode surface resulted in an efficient reduction of hydrogen peroxide, allowing the sensitive and selective quantitation of glucose by the direct reduction of enzymatically‐liberated hydrogen peroxide at ?0.1 V versus Ag/AgCl (3 M NaCl) without a mediator. The present biosensor responded linearly to glucose in the wide concentration range from 5.0×10^?5 to 5.0×10^?3 M with a good sensitivity of 154 mA M^?1cm^?2. Due to the mesoporous nature of CNT–titania–Nafion composite film, the present biosensor exhibited very fast response time within 2 s. In addition, the present biosensor did not show any interference from large excess of ascorbic acid and uric acid.