2-（1,3-Diphenylpropen-1,3-diolato）-1,3,2-（5-formylbenzo）dioxaborol： A ＇Whole-molecule Disorder＇ Crystal Structure

The boron atom in C22H15BO5 is O,O’-chelated by the anions in a tetrahedral geometry, with the planar five-and six-membered chelate rings being orthogonal to each other. The molecule lies on a two-fold rotation axis. The molecule is disordered with respect to another molecule in a 93:7 ratio; the treatment of the ‘whole-molecule disorder’ by employing a large number of restraints is described. Crystal data: C22H15BO5, monoclinic C2/c, a = 17.1804(5), b = 12.9409(4), c = 9.8842(3) , β = 124.832(2)o, V = 1803.82(9) 3 at –173 K.     

Partial melting and recrystallization of isotactic polypropylene

<正>A relatively high predetermined crystallization temperature(135℃) was chosen to grow well developed iPP spherulites,then the partial melting was carried out at a temperature of 165℃,where the preformed spherulites were seen to only decrease their size but not completely melted.The crystallization behavior of partially melted isotactic polypropylene (iPP) has been carefully examined by different scanning calorimetry(DSC) and polarized light microscopy(PLM).The experimental results show that at a special annealing temperature(165℃) the melting behavior of iPP includes two parts with different mechanism,one part is the melting of iPP spherulite outside,another is the partial lamellae perfection during longer annealing time in the unmelted spherulite.The conformational orders of the iPP melt decrease with the increase of the annealing temperature.     

顶空气相色谱法快速测定肉及肉制品中乙烯利的残留量

利用乙烯利在碱性水溶液中受热能够快速分解成乙烯的特性,建立了顶空气相色谱法快速测定乙烯利在肉及肉制品中残留量的方法。在样品中添加碱液后恒温加热,吸取顶空瓶中的上层气体,采用石英毛细管色谱柱分离,氢火焰离子化检测器测定。该方法的检测限为0.01mg/kg,回收率为90.9%～96.0%,相对标准偏差为3.5%～8.5%。适用于猪肉、牛肉、鸡肉等肉及肉制品中乙烯利残留量的检测。     

气相色谱-质谱法测定玩具中的4种阻燃剂

建立了玩具中三(2-氯乙基)磷酸酯、磷酸三邻甲苯酯、2,2′,4,4′,5-五溴联苯醚、2,2′,3,3′,4,4′,6,6′-八溴联苯醚等4种阻燃剂的气相色谱-质谱分析方法。玩具样品以V(正己烷):V(二氯甲烷)=1:1混合溶液为提取溶剂,超声提取30min,提取液以DB-5HT石英毛细管色谱柱(15m×0.25mm×0.10μm)分离后进行选择离子监测模式下的定性及定量分析。4种阻燃剂的定量限为0.1mg/kg,在低、中、高3个添加水平范围内,4种阻燃剂的平均回收率为93.5%～97.3%,相对标准偏差在2.4%～4.1%之间。     

偏最小二乘紫外分光光度法同时测定甲基苯甲醛三种同分异构体

将偏最小二乘法(PLS)用于紫外分光光度数据的解析,建立了同时测定甲基苯甲醛3种同分异构体的模型。在230～304 nm范围内,将测得的48个样品的吸光度值作为校正集,另18个样品的吸光度值作为预测集用于建模。所建立的邻、间、对甲基苯甲醛模型的平均回收率分别为101.2%、100.2%和98.9%;均方根误差(RMSE)分别为0.2667、0.3853和0.2118;预测浓度范围分别为4.6～16.2μg/mL、5.8～17.4μg/mL和6.5～20.6μg/mL。讨论了混合物中3种同分异构体浓度比例对测定结果的影响,并确定了最佳的浓度比例范围。对模拟样品进行加标回收率试验。并通过与顺、反丁烯二酸两种同分异构体测定结果的比较,得出了有意义的结论。     

第一原理分子动力学研究类金刚石薄膜的结合强度与摩擦性能

金刚石(110)表面具有不同方向上抛光速率的强烈不对称的特征,用第一性原理全能量平面波赝势方法模拟研究了类金刚石薄膜表面的结合强度与摩擦性能,确定了相互作用模型以及排斥力作用范围,研究了范德华排斥力在摩擦表面上的分布,研究结果表明,摩擦表层感受到的力在〈001〉和〈110〉2个方向上表现明显不同,而且〈110〉方向上摩擦力一直高于〈001〉方向上的摩擦力.     

Syntheses,Structural Characterization and Thermoanalysis of Transition-Metal Compounds Derived from 3,5-Dinitropyridone

Abstract  

Nine metal compounds of Mn(II), Zn(II) and Cd(II) derived from dinitropyridone ligands (3,5-dinitropyrid-2-one, 2HDNP; 3,5-dinitropyrid-4-one, 4HDNP and 3,5-dinitropyrid-4-one-N- hydroxide, 4HDNPO) were characterized by elemental analysis, FT-IR and partly by TG-DSC. Three of which were further structurally characterized by X-ray single-crystal diffraction analysis. The structures of the three compounds, Mn(4DNP)₂(H₂O)₄, 4, Zn(4DNPO)₂(H₂O)₄, 8, and Cd(4DNPO)₂(H₂O)₄, 9, crystallize in the monoclinic space group P2(1)/n and Z = 2, with a = 8.9281(9), b = 9.1053(9), c = 10.6881(11) Å, β = 97.9840(10)° for 4; a = 8.4154(7), b = 9.9806(8), c = 10.5695(8) Å, β = 97.3500(10)° for 8; a = 8.5072(7), b = 10.2254(8), c = 10.5075(8) Å, β = 96.6500(10)° for 9. All three complexes are octahedral consisting of four equatorial water molecules, and two nitrogen or oxygen donor ligands (DNP or DNPO). The abundant hydrogen-bonding and π-π stacking interactions seem to contribute to stabilization of the crystal structures of the compounds. The TG-DTG results revealed that the complexes showed a weight loss sequence corresponding to all coordinated water molecules, nitro groups, the breaking of the pyridine rings and finally the formation of metal oxides.     

中波红外景象投影光学系统消热差设计

针对红外成像系统性能测试与评估的应用需求,设计了一套基于数字微镜器件的消热差的中波红外景象投影光学系统.探讨了红外视景仿真用投影光学系统的像差特性和设计方法,并对投影系统的无热化进行了分析.采用分光板和补偿板方案,解决了大相对孔径条件下投影系统的远心照明分光和像差平衡问题,提高了分辨率和均匀性,增大了视场.系统由远心投...     

离轴三反红外双波段景象模拟器光学系统设计

 针对红外双波段成像系统性能测试与评估的应用需求,设计了3 μm～5 μm和8 μm～12 μm红外双波段视景仿真用离轴三反光学系统。在共轴三反光学系统成像理论基础上,分析了孔径光栏远离主镜的离轴三反系统像差特性,研究了大出瞳距、大相对孔径条件下离轴三反光学系统的结构设计和像差平衡方法。系统焦距为330 mm,F#为3,视场为6°×4.5°,出瞳距为750 mm,在空间频率10 lp/mm 处,中波红外MTF>0.65,长波红外MTF>0.4,接近衍射极限。具有大视场、大出瞳距、高分辨率、结构紧凑等特点。     

脉冲控制量子系统的哈密顿量约化

探索了脉冲控制的含近简并能级的有限维量子系统的哈密顿量的约化．由一个非简并基态能级和几个近简并激发态能级组成的量子系统被一个短脉冲控制,目标是控制所有激发态的布居数之和．考虑了两个可以看成等价二能级系统的例子,当脉冲强度比较弱时,得到了原始系统和约化系统的简单关系;当脉冲强度比较强时,对于只含一个频率的脉冲,一阶近似的关系也是存在的．