差分流线扩散法的局域稳定性分析

本文讨论差分流线扩散法的局部稳定性分析，在理论上证明了该方法依旧保持着流线扩散法扰动局部影响的特性。     

BEPCⅡ高频发射机和环流器的调整和测试

北京正负电子对撞机升级改造工程(BEPCⅡ)将采用的频率500MHz、输出功率250kW的高频发射机和环流器已安装、调整、测试和验收完毕,这是国内建立的第一套500MHz/250kW发射机系统.本文将详细介绍机器的调测试的原理和各项测量内容及结果, 并比较设计指标和要求,来阐述此发射机的实际技术指标和测试性能.     

双齿配体—1,2—C_6H_4SX(X=O,S)的钴化合物~1H NMR研究

以~1H NMR谱学和磁化率对一些含邻苯二硫酚或巯基苯酚配体的钴化合物的磁性作了研究,并讨论了它们的电子结构。     

双齿配位过渡金属化合物化学——Ⅲ.钒的邻巯基苯酚配合物的顺磁谱研究

测定了二个顺磁性化合物(Ph_1P)[V_2(mp)_6](Ⅰ)和(Ph_4P)_2[NaV(mp)_3 (MeCN)(MeOH)](Ⅱ)(H_2mp=邻巯基苯酚,o-HO_1C_6H_4SH)的固态和/或溶液中的顺磁波谱。(Ⅰ)的77K固态谱及(Ⅱ)的室温固态谱均经模拟计算,认为它们的钒原子处在S=l/2的Ⅰ=7/2状态,(Ⅱ)的低温(77K)溶液谱(乙腈)与Ⅱ的固态谱相同,均有特征的八条精细结构,认为非配对电子基本上定域在钒原子的周围。     

Asymptotic speeds of spread and traveling waves for monotone semiflows with applications

The theory of asymptotic speeds of spread and monotone traveling waves is established for a class of monotone discrete and continuous‐time semiflows and is applied to a functional differential equation with diffusion, a time‐delayed lattice population model and a reaction‐diffusion equation in an infinite cylinder. © 2005 Wiley Periodicals, Inc.     

三维内肋管内插入螺旋扭带的强化传热实验

本文分别以水和乙二醇为工质，在Ｒｅ数范围为：６００～４００００，Ｐｒ数范围为：５．５～１１０之间，对四根分别插入三种不同扭率螺旋扭带的三维内助管内的换热和流阻特性进行了实验研究。结果表明：三维内肋管内加装扭带的强化传热技术适用于低Ｒｅ数下高Ｐｒ数工质的管内对流换热强化。根据实验值得到了流阻和换热关联式。     

灰色Verhulst模型的样条插值函数的残差修正

本用样条函数对灰色Verhulst模型的残差序列进行插值拟合，然后作用于二阶线性微分方程，并以此修正原模型，得到一种新的预测模型的数值解，提高了拟合的精确度。     

Formation of β‐iPP in isotactic polypropylene/ethylene–propylene rubber blends: Effects of preparation method,composition, and thermal condition

The effects of preparation method, composition, and thermal condition on formation of β‐iPP in isotactic polypropylene/ethylene–propylene rubber (iPP/EPR) blends were studied using modulated differential scanning calorimeter (MDSC), wide angle X‐ray diffraction (WAXD), and phase contrast microscopy (PCM). It was found that the α‐iPP and β‐iPP can simultaneity form in the melt‐blended samples, whereas only α‐iPP exists in the solution‐blended samples. The results show that the formation of β‐iPP in the melt‐blended samples is related to the crystallization temperature and the β‐iPP generally diminishes and finally vanishes when the crystallization temperature moves far from 125 °C. The phenomena that the lower critical temperature of β‐iPP in iPP/EPR obviously increases to 114 °C and the upper critical temperature decreases to 134 °C indicate the narrowing of temperature interval, facilitating the formation of β‐iPP in iPP/EPR. Furthermore, it was found that the amount of β‐iPP in melt‐blended iPP/EPR samples is dependent on the composition and the maximum amount of β‐iPP formed when the composition of iPP/EPR blends is 85:15 in weight. The results through examining the effect of annealing for iPP/EPR samples at melt state indicate that this annealing may eliminate the susceptibility to β‐crystallization of iPP. However, only α‐iPP can be observed in solution‐blended samples subjected to annealing for different time. The PCM images demonstrate that an obvious phase‐separation happens in both melt‐blended and solution‐blended iPP/EPR samples, implying that compared with the disperse degree of EPR in iPP, the preparation method plays a dominant role in formation of β‐iPP. It is suggested that the origin of formation of β‐iPP results from the thermomechanical history of the EPR component in iPP/EPR. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1704–1712, 2007     

MgO films grown on yttria-stabilized zirconia by molecular beam epitaxy

MgO films were grown on (0 0 1) yttria-stabilized zirconia (YSZ) substrates by molecular beam epitaxy (MBE). The crystalline structures of these films were investigated using X-ray diffraction and transmission electron microscopy. Growth temperature was varied from 350 to 550 °C, with crystalline quality being improved at higher temperatures. The MgO films had a domain structure: (1 1 1)[1 1 2¯]_MgO(0 0 1)[1 0 0]_YSZ with four twin variants related by a 90° in-plane rotation about the [1 1 1]_MgO axis. The observed epitaxial orientation was compared to previous reports of films grown by pulsed laser deposition and sputtering and explained as resulting in the lowest interface energy.     

白光干涉条纹变密的原因探讨

讨论了在测定透明介质折射率的过程中彩色条纹变密的现象，并在其基础上分析其成因：一是由于媒质折射率加大；二是由于平形板介质平行度不好造成楔形的倾角变大，最后在实验中验证了理论结果。