季铵盐用于示波极谱滴定法测定培氟沙星和环丙沙星

介绍采用季铵盐 十六烷基三甲基溴化铵作滴定剂的示波极谱滴定法测定培氟沙星和环丙沙星含量的方法。在pH 4 .8HAc NaAc缓冲溶液中 ,培氟沙星和环丙沙星均能与四苯硼钠 (Na TPB)作用生成沉淀 ,干过滤后 ,用十六烷基三甲基溴化铵标准溶液代替在示波极谱滴定法中常用的有毒硫酸亚铊作为滴定剂 ,回滴滤液中过量的Na TPB ,由示波极谱图 [dE dt=f(E)曲线 ]上TPB的切口消失指示终点。本法终点直观、灵敏 ,操作简便、快速 ,应用于多批原料药样品的测定 ,均获得满意的结果 ,其回收率在 99.9%～ 10 0 .3%之间 ,最大相对误差 <± 0 .3% ,与非水滴定法测得结果基本吻合。     

缓慢炭化部分氧化对制备煤质活性炭的影响

研究了炭化升温速度、炭化低温区引入空气部分氧化对活性炭制备过程中炭化阶段、炭化物结构、活性炭性能等的影响。结果表明，炭化时低温部分氧化可提高炭化物得率，使炭化物微晶的ｄ００２值升高和Ｌｃ值减小；而较慢的炭化升温速度有利于制备优质活性炭。缓慢炭化、部分氧化可以在一定程度上控制炭化路径，使炭化向生成取向性差、难石墨化、各向同性、呒定形炭多的炭化物的方向进行；并讨论了它们控制炭化的作用机理。以此为指导，     

Preparations of ginsenoside Rg1 immunogen and125I-labeled antiğen

This work began with the side chain of ginsenoside Rg₁ which was acetylized with Ac₂O-Pyr and oxidized by OsO₄ and NaIO₄ to give ginsenoside Rg₁ aldehyde(2), which was further converted into an unsaturated ester(3) by Wittig-Horner reaction. The unsaturated ester(3) was treated with N₂H₄ and HNO₂ to yield Rg₁ azide(4) which was directly conjugated with BSA to give immunogen: ginsenoside Rg₁-BSA conjugate(5). This azide(4) was conjugated with tyramine to give ginsenoside Rg₁-tyramine conjugate which was labelled with free Na¹²⁵I by CH-T to yield¹²⁵I-labeled antigen: gensenoside Rg₁-¹²⁵I-tyramine(6). The labelling rate was 40%–50% and specific activity was 3.0–4.0 MBq/g.     

热致液晶共聚酯对聚丙烯结晶的诱导作用

用差示扫描量热法和光学解偏振法研究了热致液晶性芳香共聚酯与聚丙烯共混物的等温和非多温结晶行为.结果表明,这一热致液晶聚合物对聚丙烯结晶有诱导成核和加速作用.当共聚酯含量在2-5％之间时,聚丙烯的结晶速率最快.偏光显微镜的观察揭示出在聚丙烯熔体中原位形成的液晶聚合物微纤诱导了聚丙烯横穿晶的形成.     

PREPARATION OF POLY（METHYL METHACRYLATE）/LAYERED DOUBLE HYDROXIDES NANOCOMPOSITES via in situ SOLUTION POLYMERIZATION

An exfoliated layered double hydroxides/poly(methyl methacrylate)(LDHs/PMMA)nanocomposite was prepared by in situ solution polymerization of methyl methacrylate(MMA)in the presence of 4-vinylbenzenesulfonate intercalated LDHs(MgAl-VBS LDHs).MgAl-VBS LDHs was prepared by the ion exchange method,and the structure and composition of the MgA1-VBS LDHs were determined by X-ray diffraction(XRD),infrared spectroscopy and elemental analysis.XRD and transmission electron microscopy(TEM)were employed to examine the structure of LDHs/PMMA nanocomposite.It was indicated that the LDHs layers were well exfoliated and dispersed in the PMMA matrix.The grafting of PMMA onto LDHs was confirmed by the extraction result and the weight fraction of grafted PMMA increased as the weight fraction of LDHs in the nanocomposites increased.     

A new route to semirigid poly(amide-ester)s with ordered structure

Four novel semirigid poly(amide-ester)s having the same ordered amide-amide-ester-ester (-AAEE-) and the same or the different phenyl structure were synthesized from the various combination of active acylamide of benzotriazole (HBT) such as 1,1′-(isophthaloyl)bisbenzotriazole (IPBBT) and 1,1′-(terephthaloyl)bisbenzotriazole (PBBT) with diols such as N,N'-bis(2-hydroxyethyl)isophthamide (HEIPA) and N,N'-bis(2-hydroxyethyl)terephthamide (HEPTA) which prepared from the selective N-acylation of IPBBT or PBBT with aminoethanol in excellent yield at room temperature. Before the preparation of diol monomers, a model reaction of selective N-acylation was also completed from active monoacylamide of benzotriazole, 1-benzoylbenzotriazole with aminoethanol. The ordered structure of poly(amideester)s were characterized by infrared (IR) and NMR spectra. On the bases of different reactivity between selective N-acylation and O-acylation of active acylamide of benzotriazole, poly(amide-ester)s having the ordered AAEE and the same phenyl structure were also readily synthesized from the IPBBT or PBBT with aminoethanol under mild conditions by one-bath process.     

Synthesis, spectroscopic studies and crystal structure of a polyoxoanion cluster incorporating para-bromophenylimido ligand, (Bu4N)2[Mo6O18(NC6H4Br-p)]

An organic-inorganic hybrid compound, (Bu₄N)₂[Mo₆O₁₈(NAr)] (Ar = p-BrC₆H₄) has been synthesized via the DCC dehydrating protocol of the reaction of [α-Mo₈O₂₆]⁴⁻ with 4-bromoaniline hydrochloride in anhydrous acetonitrile, which has been characterized by UV-Vis spectra, ¹H NMR and single crystal X-ray diffraction study. By comparing the UV-Vis spectra, which were used to monitor the reaction, the optimum preparative condition for this compound was also determined. This compound crystallizes in the monoclinic space group P2₁/n, which is featured in a terminal para-bromophenylimido group linked to an Mo atom of a hexamolybdate cluster by a Mo-N triply bond. In addition, there are π-π dimerization of the neighboring cluster anions though the parallel aromatic rings in their crystals.     

Synthesis and Structure of Dimolybdenum Carbonyl Thiolate Compound [Et4N]2[Mo2（CO）8（SC6H4—CH3—m）2]

1 INTRODUCTION In 1984, thiolate ligand was successfully introduced into molybdenum carbonyl compound by the reaction of Mo(CO)6 with [Et4N]SR( R = C6H5, But) in a moderate condition[1]. From then on, a series of dinuclear molybdenum(0) carbonyl thiolate compounds have been synthesized and characterized by using a variety of thiolate ligands in our research group. It was found that a planar Mo2S2 unit is in the compound [Et4N]2[Mo2(CO)8(SC6H4-CH_3-p)2][2] (2) and a "butterfly" t…     

5-氟尿嘧啶-1-乙酸合铜(Ⅱ)的合成及其与DNA的作用

The 5-fluorouracil-1-acetic acid (5FuAA) and its Cu(Ⅱ) complex (5FuAACu) were synthesized and the date for the crystal complex was obtained. The interaction of 5-fluorouracil-1-acetic acid (5FuAA) and its Cu(Ⅱ) complex (5FuAACu) with DNA was also investigated by using spectral, viscometric, electrochemical and agarose gel electrophoresis methods. The results of interaction with DNA suggest that both 5FuAA and 5FuAACu can bind to DNA in a static electricity attraction mode. But the attraction of 5FuAACu is greater than that of 5FuAA.     

Effect of drug-loading methods on drug load, encapsulation efficiency and release properties of alginate/poly-L-arginine/chitosan ternary complex microcapsules

The drug-loaded alginate/poly-L-arginine/chitosan ternary complex microcapsules were prepared by mixing method, absorption method and the combined method of mixing and absorption, respectively. The effect of drug-loading methods on drug load, the encapsulation efficiency and the release properties of the complex microcapsules were investigated. The results showed that the absorption process is a dominating factor to greatly increase the drug load of Hb into microcapsules. Upon loading Hb into microcapsules by combined method of mixing and absorption, the drug load (19.9%) is up to the maximum value, and the encapsulation efficiency is 93.8%. Moreover, the drug release is a zero-order kinetics process for the ternary complex microcapsules made by mixing. For the complex microcapsules made by absorption, the drug release is a first-order kinetics. However, for the complex microcapsules made by combining the mixing and the absorption, the drug release obeys a first-order kinetics during the first eighteen hours, changing afterwards to a zero-order kinetics process. Effect of drug-loading methods on drug load and encapsulation efficiency of alginate/poly-L-arginine/chitosan ternary complex microcapsules.