煤颗粒燃烧破碎特性及其分数维理论

本文采用激光衍射法和光学显微计算机图像系统及自行开发的软件,测量了三个典型煤在快速加热初期燃烧、等温加热燃烧和火焰燃烧方式的颗粒尺寸,运用分数维理论,建立了煤燃烧颗粒破碎理论,实验和理论研究揭示了煤燃烧中颗粒尺寸变化的本质,理论计算和实验结果符合良好。     

规则结构多孔填料塔两相流动特性实验研究

本文以空气和水为工质,对规则结构多孔填料塔的气-液逆向流动特性进行了可视化实验,研究了填料塔内气一液两相流动规律.实验结果表明:当液体流量一定时,随着气体流量的增加,压力损失增大;当气体流量一定时,随着液体流量的增加,气相压力损失增加.根据实验结果提出了采用水力雷诺数、韦伯数和无量纲流动参数的填料塔内气-液两相流动阻力系数实验关联式.     

Preparation and microwave absorption properties of electroless Co-Ni-P coated strontium ferrite powder

A new type of Co-Ni-P coated strontium ferrite nanocomposite was prepared with electroless plating enhanced by ultrasonic wave at room temperature. The plating process was studied carefully. The morphology, crystal structure and microwave absorption properties of the Co-Ni-P coated powder were studied with field emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), energy dispersive analysis of X-rays (EDX) and vector network analyzer. The results show that the strontium ferrite powder was successfully coated with Co-Ni-P alloy and possesses excellent microwave absorption properties. The maximum microwave loss of the composite powder reaches −44.12 dB. The bandwidth with the loss above −10 dB exceeds 13.8 GHz.     

Two New Ionone Derivatives from Rhododendron przewalskii Maxim

Two new ionone derivatives,named rhododendrone and rhododendronside,were isolated from the alcohoilc extract of the aerial parts of Rhododendron przwalskii Maxim.Their structures were elucidated on the basis of spectroscopic analysis.     

巴旦杏中脂肪酸的测定

采用气相色谱仪进行定量分析，气－联质联用仪进行定性分析，巴旦杏中脂肪酸进行了测定，并探讨了样品处理方法和气－质联用仪的分析条件，得到了较为满意的分析结果。     

In situ observation of NaBi(WO4)2 dendrite growth and the study on microstructure of solidification

The dendrite growth process of transparent NaBi(WO₄)₂ with small prandtl and high melting point was studied by using the in-situ observation system. According to the dynamic images and detailed information, there are two kinds of restriction effect on the dendrite growth, the competition between arms and branches and the convection in the melt. The dendrite growth rate was time dependent, and the rate of arm growth reached the maximum 5.8 mm/s in the diffusive-advective region and rapidly decreased in the diffusive-convective region. The growth rate of branch had the same change trends as the arm’s. Based on the EPMA-EDS data of solidification structure of quenched NaBi(WO₄)₂ melt, it was found that there were component differences from stoichiometric concentration in the melt near the interface during the growth process. Supported by the National Natural Science Foundation of China (Grant No. 50331040) and the Innovation Funds from Shanghai Institute of Ceramics, Chinese Academy of Sciences (Grant No. SCX0623)     

睾酮类兴奋剂测定中一些β-葡萄糖醛酸甙酶酶解能力的比较

睾酮是国际奥委会规定禁用的99种兴奋剂之一,由于睾酮是内源性激素,因此不能靠定性来判断运动员是否服用了睾酮,在人体激素代谢中,产生睾酮差向异构体——表睾酮,在男性黄种人中睾酮与表睾酮浓度比约为1:1,白种人中略高一些,根据这一情况,国际奥委会规定,人尿中睾酮与表睾酮之间浓度比不得超过6:1,尿中排泄出的睾酮和表睾酮是以葡     

Christoffel functions and mean convergence for Lagrange interpolation for exponential weights

For exponential weights, a necessary condition of weighted mean convergence for Lagrange interpolation is given.     

The Design of Single Mode Large Cross-section Glass-based Waveguides for Photonic Integrated Circuits

This paper presents our recent simulation results and novel designs of single mode large cross-section glass-based waveguides for photonic integrated circuits (PICs). Simulations were performed using an in-house Finite Difference (FD) based mode solver and the FD Beam propagation Method (FD-BPM). Our simulation results show that this innovative technology could provide a simplified means to couple optical energy efficiently between optical components in a single chip. This would provide the base for the future large-scale integration of optical components in PICs. The novel idea of using single mode large cross-section glass-based waveguides as an optical integration platform is an evolutionary innovative solution for the monolithic integration of optical components, in which the glass-based structures act both as waveguides and as an optical bench for integration. This allows easy and efficient optical coupling between optical components and optical fibres, removing costly and tedious alignment problems and considerably reducing optical coupling losses in PICs. We expect that the glass-based waveguide PICs technology will enable the emergence of a new generation of compact, reliable, high speed, and multifunctional devices.     

微纳米加工技术在纳米物理与器件研究中的应用

物质在纳米尺度下可能呈现出与体材料不同的物理特件，这正是纳米科技发展的基础之一。要想探索在纳米尺度下材料物埋性质的变化规律及可能的应用领域，离不开相应的技术手段，微纳米加工技术作为当今高技术发展的重要技术领域之一，是实现功能人工纳米结构与器件微纳米化的基础。本文根据几个不同的应用领域，介绍了微纳米加工技术在纳米物理与器件研究领域的应用。