Synthesis, spectroscopic studies and crystal structure of a polyoxoanion cluster incorporating para-bromophenylimido ligand, (Bu4N)2[Mo6O18(NC6H4Br-p)]

An organic-inorganic hybrid compound, (Bu₄N)₂[Mo₆O₁₈(NAr)] (Ar = p-BrC₆H₄) has been synthesized via the DCC dehydrating protocol of the reaction of [α-Mo₈O₂₆]⁴⁻ with 4-bromoaniline hydrochloride in anhydrous acetonitrile, which has been characterized by UV-Vis spectra, ¹H NMR and single crystal X-ray diffraction study. By comparing the UV-Vis spectra, which were used to monitor the reaction, the optimum preparative condition for this compound was also determined. This compound crystallizes in the monoclinic space group P2₁/n, which is featured in a terminal para-bromophenylimido group linked to an Mo atom of a hexamolybdate cluster by a Mo-N triply bond. In addition, there are π-π dimerization of the neighboring cluster anions though the parallel aromatic rings in their crystals.     

Synthesis and Structure of Dimolybdenum Carbonyl Thiolate Compound [Et4N]2[Mo2（CO）8（SC6H4—CH3—m）2]

1 INTRODUCTION In 1984, thiolate ligand was successfully introduced into molybdenum carbonyl compound by the reaction of Mo(CO)6 with [Et4N]SR( R = C6H5, But) in a moderate condition[1]. From then on, a series of dinuclear molybdenum(0) carbonyl thiolate compounds have been synthesized and characterized by using a variety of thiolate ligands in our research group. It was found that a planar Mo2S2 unit is in the compound [Et4N]2[Mo2(CO)8(SC6H4-CH_3-p)2][2] (2) and a "butterfly" t…     

纳米晶复合Nd2Fe14B/α-Fe合金制备与磁性能的研究

采用熔体快淬及晶化处理工艺制备Nd11Fe71Co8V1.5Cr1B7.5纳米晶合金。经21m·s-1快淬及640℃ 4min晶化处理后,制成的粘结磁体的磁性能最佳,为:Br=0.64T,JHc=903.5kA·m-1,(BH)max=71kJ·m-3。添加Cr元素可提高内禀矫顽力,从而提高最大磁能积。     

YPxV1—xO4（0≤x≤1）：Dy^3＋的合成及其光谱性质的研究

本文报道了不同组成的ＹＰｘＶ１－ｘＯ４（０≤ｘ≤１）：Ｄｙ＾３＋的合成和结构。ＹＰｘＶ１－ｘＯ４（０≤ｘ≤１）为四方晶系，晶胞参数随ｘ的增大呈线性减小。基质的Ｓｔｏｋｅｓ位移随ｘ的增大逐渐变大，而激发光谱峰值则向短波方向移动。在ＹＰｘＶ１－ｘＯ４：０．００６Ｄｙ＾３＋体系中，ｘ＞０．４时出现的基质发射是由ＰＯ＾３－４引起的。基质及Ｄｙ＾３＋的发光效率和Ｄｙ＾３＋的发光强度的黄蓝比均与ｘ有关。同时探     

Maximum spectrum of continuous wavelet transform and its application in resolving an overlapped signal

To estimate the number of peaks and to find the individual peak positions in an overlapped signal, a new method called maximum spectrum of continuous wavelet transform (MSCWT) was developed by extracting the maximum coefficients of continuous wavelet transform (CWT). The peak position in MSCWT was the same as that in its original signal. In this process, CWT was performed not on a single dilation but on an appreciation dilation range. To obtain such a range, a new criterion was introduced to choose a center dilation, which was used to form the dilation range. If Cdilation denoted the center dilation, the proper dilation range was [Cdilation -6 +/- 2, Cdilation +1 +/- 1]. The Mexican Hat function was an analytical wavelet. Utilizing the information of the peak number and the position detected by MSCWT, a fitting route was performed to recover the original signal. One simulated and four true overlapped signals, including high performance liquid chromatography (HPLC), ultraviolet-visible (UV) spectrum, and differential pulse voltammetric (DPV), were processed, and the results indicated that MSCWT could detect an overlapped peak number and position, and the curve fitting based on information of MSCWT had a higher accuracy. The proposed method was an efficient one in resolving different types of overlapped signals.     

非晶SiO2纳米灯笼的制备和表征

在1000 ℃用活性炭把二氧化锡粉末还原成单质锡, 锡作为催化剂, 硅片作为硅源同时作为收集衬底, 在硅片上制备出了非晶SiO2纳米灯笼. 灯笼的一端连在硅片上, 另一端为一个锡球, 中间是一些圆弧状的SiO2纳米线把两端相连. 纳米灯笼具有良好的对称性. 利用扫描电子显微镜(SEM)、高分辨透射电子显微镜(HRTEM)、选区电子衍射(SAED) 和HRTEM自带的能谱分析仪(EDS)对样品的表面形貌、微观结构和成分进行了分析研究. 结果表明, 灯笼中SiO2纳米线为非晶态, 结点是晶态锡, 结点表面覆盖一层非晶态的硅的氧化物. 结合实验条件对纳米灯笼的生长机理进行了讨论, 提出了纳米灯笼生长的一个模型.     

同步辐射白光全反射XRF在痕量元素检测的初步应用研究

叙述了同步辐射白光全反射Ｘ射线荧光分析的实验装置，给出了几种标准物质ＴＸＲＦ实验的检出限，并对实验结果进行了讨论。     

控制异丁烯阳离子聚合终止方式的新方法—活性中心转化法

控制异丁烯阳离子聚合终止方式的新方法──活性中心转化法曹宪一，王强，武冠英（北京化工大学高分子材料研究所，北京，１０００２９）关键词异丁烯，阳离子聚合，活性中心转化自八十年代中期Ｈｉｇａｓｈｉｍｕｒａ及Ｋｅｎｎｅｄｙ等人陆续发现乙烯基醚类单体及异丁烯...     

密胺树脂/硼酸锌双层包覆微胶囊化红磷的制备及其在阻燃聚烯烃中的应用

描述了采用密胺树脂和硼酸锌连续双层包覆微胶囊化红磷(MRP)的最新制备方法。采用红外光谱、电子能谱和透射电镜等分析手段对其进行了表征，并证实红磷已被完全包覆。实验数据表明：经包覆的MRP的热稳定性获得了明显改善，吸水率和磷化氢的发生量均大大减少。MRP作为阻燃助剂应用于聚烯烃阻燃材料表现出了良好的阻燃效果。实时红外和热失重测量以及扫描电镜观察表明：其阻燃机制是红磷受热时与树脂反应促进了含磷膨胀炭层的形成，从而提高了材料的热稳定性，碳层起到了隔氧、隔热作用，而且主要在凝聚相中发挥其阻燃作用。     

Guest sorption and desorption in the metal-organic framework [Co(INA)(2)] (INA=isonicotinate)--evidence of intermediate phases during desorption

The metal-organic framework [Co(INA)(2)]x0.5EtOH (INA = isonicotinate, NC(5)H(4)-4-CO(2)(-)), was synthesised under solvothermal conditions. Its X-ray crystal structure shows channels containing ethanol guests which are hydrogen-bonded to carboxylate oxygens of the framework. The pyridyl rings of the framework alternate between 'open' and 'closed' positions along the channels resulting in large variation in the channel cross-sectional area from ca. 1.4 by 2.3 A at the narrowest point to 4.9 by 5.3 A at the widest. Despite the very small windows, the ethanol guests (of van der Waals diameter ca. 4.2-6.1 A) may be reversibly desorbed and sorbed into the structure quantitatively, as shown by in situ variable-temperture IR spectroscopy and XRPD. The single-crystal structure of the desolvated form [Co(INA)(2)] shows that there is no change in the overall connectivity on desolvation, but the rotational positions of the pyridine rings are altered. This suggests that pyridyl rotation may occur to allow guests to pass in and out. When the synthesis was conducted in 1-propanol solvent [Co(INA)(2)]x0.5Pr(n)OHxH(2)O, was obtained, and a single-crystal X-ray structure revealed the same overall connectivity as in but with pyridine rings disordered over closed and open positions. There was no evidence of included guests from X-ray crystallography, suggesting that they are also highly disordered. Variable-temperature XRPD performed on bulk samples showed peaks which were unsymmetrical and exhibited shoulders, suggesting that for each pattern obtained the material actually consisted of several closely-related phases. The movements of the peaks during desolvation showed the presence of intermediate phases before the final desolvated product was formed. The peak positions of the intermediate phases matched more closely with the calculated pattern for than with or, suggesting that they may have disordered structures similar to. The results also suggest that the intermediate phase represents an initial increase in volume before a larger decrease in volume occurs to give the final desolvated material.