A Novel Organic—Inorganic Complex：Synthesis and Crystal Structure of [Ca（DMSO）5（H2O）]2 SiMo12O40

It is becoming a focus to synthesize and assemble organic-inorganic materials, especially, to synthesize charge-transfer complexes formed by polyoxometalate and organic donors. They have attracted much attention because such complexes are active in their electric, magnetic and optic properties1-4, many investigations about them have been done and some crystal structures of them were reported5-6. But, the disadvantage of these crystals is instability at room temperature. According to the view…     

Synthesis and magnetic properties of copper(II)-MII-copper(II) trinuclear complexes with N,N′-bis(2-aminoethyl)oxamidocopper(II) [M = Co and Ni]

Summary Two novel trinuclear complexes were prepared, namely [Cu₂(oxae)₂(H₂O)₂M] (ClO₄)₂, [oxae = N,N-bis(2-aminoethyl) oxamido dianion; M = Co and Ni]. Based on elemental analyses, conductivity measurements and i.r. spectra, the complexes are proposed to have extended oxamidobridged structures. The magnetic susceptibility of [Cu₂-(oxae) ₂(H₂O)₂Co](ClO₄)₂ were measured over the 4–300 K range and the observed data were successfully simulated by an equation based on the spin Hamiltonian, =–2J(₁·₂·₂·₃). The exchange integral, J, was found to be equal to –29.2 cm^–1, indicating an antiferromagnetic spin-exchange interaction between the adjacent metal ions.     

红外镜反射光谱的测试与解析

红外镜反射（infrared specular reflection，简称SR）光谱与被测样品和衬底的折射指数、吸收指数以及入射角有密切关系，往往由之产生畸变。要从红外镜反射技术测得的光谱处理得到人们熟悉的吸收光谱，需要经过较复杂的计算机数学处理。本文通过几个比较特殊的镜反射例子，以说明镜反射光谱的测试和解析必须注意多种影响因素。     

Synthesis of monodisperse poly(chloromethylstyrene-co-divinylbenzene) beads and their application in separation of biopolymers

The monodisperse, porous poly(chloromethylstyrene-co-divinylbenzene) beads of 7.9 microm were prepared by a single-step swelling and polymerization method. The seed particles prepared by dispersion polymerization exhibited good absorption of the monomer phase. Based on this media, a weak cation-exchange (WCX) stationary phase for HPLC was synthesized by a new chemically modified method. The prepared resin has advantages of biopolymer separation, high column efficiency, low column backpressure, high protein mass recovery, and good resolution for proteins. The dynamic protein-loading capacity of the synthesized WCX packings was 18.2 mg/g. Five proteins were separated in 3.0 min using the synthesized WCX stationary phase. The experimental results show that the obtained WCX resin has very weak hydrophobicity. The WCX resin was also used for the rapid separation and purification of lysozyme from egg white in 5.0 min with only one step. The purity and specific bioactivity of the purified lysozyme were found to be more than 93% and 70 245 U/mg, respectively.     

A spectroscopic study on the 12-heteropolyacids of molybdenum and tungsten (H3PMo12−nWnO40) combined with cetylpyridinium bromide in the epoxidation of cyclopentene

The epoxidation of cyclopentene with hydrogen peroxide catalyzed by 12-heteropolyacids of molybdenum and tungsten (H₃PMo_12−nW_nO₄₀, n = 1–11), 12-tungstophosphoric acid and 12-molybdophosphoric acid combined with cetylpyridinium bromide as a phase transfer reagent was carried out in acetonitrile. Among 13 heteropolyacids investigated, catalyst of H₃PMo₆W₆O₄₀ showed the highest activity, giving a conversion of 60% and a selectivity of 95% in the epoxidation of cyclopentene. The fresh catalysts and the catalysts under reaction condition were characterized by UV–vis, FT-IR and ³¹P NMR spectroscopy, which has revealed that all of the molybdotungstophosphoric acids were degraded in the presence of hydrogen peroxide to form a considerable amount of phosphorus-containing species. The active species resulted from H₃PMo₆W₆O₄₀ are new kinds of phosphorus-containing species, which is different from {PO₄[WO(O₂)₂]₄}³⁻.     

无机锡催化δ-酮腈异构化成吡啶酮反应的研究

本文分别对三种无机锡(SnCl~2,SnO和SnO~2)催化δ-酮腈异构化成吡啶酮的条件进行了考察。实验结果表明:SnCl~2和SnO具有很高的催化活性。     

电子俘获材料Zn_4B_6O_(13)∶Dy~(3+)的热释光特性研究

通过高温固相扩散反应合成了稀土元素镝掺杂的 Zn4 - x B6 O1 3∶ x Dy3+ 磷光体 .测定了该化合物在高能6 0 Co伽玛射线辐照下的热释发光曲线和三维热释光谱 .三维热释光谱表明 ,位于大约 480 nm和 5 80 nm的发光谱带来自于 Dy3+ 离子的 f-f 跃迁 .基质中掺杂的 Dy3+ 离子浓度的变化能够改变陷阱的相对分布 ,随着Dy3+浓度的增加 ,发光峰温向高温方向移动 ,这可提高剂量器的热稳定性 .当辐照剂量增加时 ,发光峰温亦向高温方向移动 ,即陷阱加深 .确定了 Zn3.86 B6 O1 3∶ 0 .1 6Dy3+样品主峰的陷阱深度 E=0 .73 e V,频率因子S=2 .43× 1 0 9s- 1 .在 1～ 1 0 0 Gy治疗级范围内 ,Zn3.86 B6 O1 3∶ 0 .1 6Dy3+ 对 6 0 Co伽玛射线辐照的热释光剂量响应呈良好的线性关系 .实验结果表明 ,Zn3.86 B6 O1 3∶ 0 .1 6Dy3+是一个潜在的应用于临床医疗的伽玛射线电离辐射热释光剂量计材料 .     

拓扑指数法研究显色剂结构与反应性能关系

本文讨论了２９个不对称色酸双偶氮膦酸型显色剂的分子联接性指数，并将其与结构选择性因子相结合，用于偶氮类剂结构与铈显色反应灵敏度的相关性研究，讨论了显色剂结构对显色反应灵敏度的影响。     

高碲酸合铜（Ⅱ,Ⅲ）配合物的合成和性质

在Ｈ６ＴｅＯ６／ＫＯＨ水溶液中以臭氧为氧化剂，将二价铜化合物氧化成三价铜化合物，并获得一个新的三价铜化合物Ｂａ４Ｋ［Ｃｕ（Ｈ２ＴｅＯ６）２］（ＯＨ）４．６Ｈ２Ｏ；描述了碱性溶液中“Ｃｕ（Ⅲ）／Ｃｕ（Ⅲ）”循环伏安图。对铜（Ⅲ）化合物，Ｎａ４Ｈ［Ｈ２ＴｅＯ６）２］．１７Ｈ２Ｏ以及相应的铜（Ⅱ）配合物的电子光谱和Ｃｕ２ｐＸＰＳ进行了研究，给出了其配位场场强参数和Ｃｕ２ＰＸＰＸ的电子结合能。由于价态升高