Mutation Breeding of Lycopene-Producing Strain Blakeslea Trispora by a Novel Atmospheric and Room Temperature Plasma (ARTP)

To improve the fermentation efficiency of lycopene, a plasma jet, driven by an active helium atom supplied with atmospheric and room temperature plasma (ARTP) biological breeding system, was used as a new method to generate mutations in Blakeslea trispora (?). After several rounds of screening, a mutant A5 with high concentration of lycopene and dry biomass was isolated, which showed a maximum lycopene concentration (26.4?±?0.2 mg/g dry biomass) which was 55 % higher than the parent strain (16.9?±?0.3 mg/g dry biomass) in the production of lycopene. Compared with parent strain, B. trispora A5 required less dissolved oxygen (10 % less than that of parent strain) to reach maximum concentration in a 5-L stirred tank reactor batch fermentation.     

Microstructure characterization of short-chain branching polyethylene with differential scanning calorimetry and successive selfnucleation/annealing thermal fractionation

A series of the copolymers of ethylene with 1-hexene(M1–M9) synthesized by metallocene catalyst Et[Ind]2ZrCl2/MAO was studied by differential scanning calorimetry and successive self-nucleation and annealing(SSA) thermal fractionation. The distribution of methylene sequence length(MSL) in the different copolymers was determined using the SSA method. The comonomer contents of samples M4 and M5 are 2.04 mol% and 2.78 mol%, respectively. Both M4 and M5 have low comonomer content and their MSL distribution profiles exhibit a monotonous increase trend with their MSL. The longest MSL of M5 is 167, and its corresponding molar percent is 43.95%, which is higher than that of M4. Moreover, the melting temperature(Tm) of M5 is also higher than that of M4. The comonomer contents of samples M7, M8, and M9 are 8.73 mol%, 14.18 mol% and 15.05 mol%, respectively. M7, M8, and M9 have high comonomer contents, and their MSL distribution profiles display unimodality. M7 has a lower peak value of 33 and a narrow MSL distribution, resulting in a Tm lower than that of M8 and M9. The MSL and its distribution are also key points that influence the melting behavior of copolymers. Sometimes, MSL and its distribution of copolymers have a greater impact on it than the total comonomer contents, which is different from traditional views.     

Solubility and solution rheology of acrylamide-sulfobetaine copolymers

The copolymer of acrylamide and 3-[N-(2-methacryloxylethyl)-N,N-dimethylammonio]-propane sulfonate (PAM-MDMPS) was prepared via free radical copolymerization. Solubility of the copolymers was studied by turbidimetric titration method under different conditions. It was found for the first time that the critical salt concentration to dissolve the copolymer showed a plateau over one order of magnitude up to the critical overlap concentration. Rheological behavior and chain conformation of the copolymers in 1 M NaCl solution were also studied. The concentration regions according to scaling theory were found the same as neutral polymers in good solvent. The specific viscosities could be normalized by the overlap parameter. According to the Huggins relation, the copolymers adopted a more compact conformation in 1 M NaCl with increasing MDMPS content due to the hydrophobic association of the betaine unit in the macromolecular backbone, which was stabilized by the strongly hydrated dipolar pendant chains.     

Conductive Cotton Prepared by Polyaniline In Situ Polymerization Using Laccase

The high-redox-potential catalyst laccase, isolated from Aspergillus, was first used as a biocatalyst in the oxidative polymerization of water-soluble conductive polyaniline, and then conductive cotton was prepared by in situ polymerization under the same conditions. The polymerization of aniline was performed in a water dispersion of sodium dodecylbenzenesulfonate (SDBS) micellar solution with atmospheric oxygen serving as the oxidizing agent. This method is ecologically clean and permits a greater degree of control over the kinetics of the reaction. The conditions for polyaniline synthesis were optimized. Characterizations of the conducting polyaniline and cotton were carried out using Fourier transform infrared spectroscopy, UV–vis spectroscopy, cyclic voltammetry, the fabric induction electrostatic tester, and the far-field EMC shielding effectiveness test fixture.     

Synthesis and self-assembly behavior of thermoresponsive poly(oligo(ethylene glycol) methyl ether methacrylate)-POSS with tunable lower critical solution temperature

This article reports on the synthesis of a novel amphiphilic polyhedral oligomeric silsesquioxane (POSS) end-capped poly(2-(2-methoxyethoxy)ethyl methacrylate)-co-oligo(ethylene glycol) methacrylate) (POSS-P(MEO₂MA-co-OEGMA)). These thermoresponsive organic–inorganic hybrid polymers exhibit critical phase transition temperature in water, which can be finely tuned by changing the feed ratio of OEGMA and MEO₂MA. The lower critical solution temperature (LCST) of POSS-P(MEO₂MA-co-OEGMA) increases from 31 to 59 °C with the increasing of OEGMA content. Dynamic light scattering (DLS) and transmission electron microscopy (TEM) studies show that these polymers can self-assemble into spherical micelles with the thermosensitive block into the corona and the POSS forming the core, and larger aggregates are formed when the temperature values are above their LCSTs. These thermoresponsive polymers POSS-P(MEO₂MA-co-OEGMA) with self-assembly behavior and tunable tempetature-responsive property have the potential applications in material science and biotechnology.     

An oxovanadium(IV) complex with o-vanillin-valine Schiff base and 1,10-phenanthroline ligands: synthesis,crystal structure and DNA interactions

A new mixed-ligand V(IV) complex, [VO(o-Van-Val)(phen)]·CH₃CN (o-Van-val = Schiff base derived from o-vanillin and l-valine, phen = 1,10-phenanthroline), was synthesized and characterized by physico-chemical methods and single-crystal X-ray diffraction. In the crystal, the V(IV) atom is six-coordinated by one oxo ligand, two oxygen atoms and one nitrogen atom from a valine Schiff base ligand, and two nitrogen atoms from 1,10-phenanthroline, giving a distorted octahedral arrangement. The DNA-binding properties of the complex were investigated by spectroscopic methods and viscosity measurements. The results suggest that the oxovanadium(IV) complex binds to DNA in an intercalation mode.     

Synthesis of star-shaped polyhedral oligomeric silsesquioxane (POSS) fluorinated acrylates for hydrophobic honeycomb porous film application

Two different eight-arm star-shaped polyhedral oligomeric silsesquioxane (POSS) fluorinated acrylates were synthesized through atom transfer radical polymerization (ATRP) and applied for hydrophobic honeycomb-patterned porous films through the breath figure (BF) method. The structure of polymers was characterized by Fourier transform infrared (FT-IR) spectroscopy, nuclear magnetic resonance (NMR), and gel permeation chromatography (GPC), and surface analysis was featured by X-ray photoelectron spectroscopy (XPS). Depending on the influences of polymer architectures, solvents utilized, and solution concentrations, honeycomb-patterned porous films were obtained. It could be found that the introduction of fluorine components was a favorable condition for BF formation and chloroform (CHCl₃) utilized as solvent with an appropriate concentration of 30 mg/mL was the best condition for these hydrophobic honeycomb-patterned porous films. Meanwhile, the obtained honeycomb films could be retained after long-time preservation in an acid-base condition, which shows a great potential in filtration, cell culture, tissue engineering, and marine antifouling applications.     

Apoptosis in BEL-7402 cells induced by ruthenium(II) complexes through a ROS-mediated mitochondrial pathway

Three Ru(II) polypyridyl complexes [Ru(dmb)₂(HMSPIP)](ClO₄)₂ (1), [Ru(phen)₂(HMSPIP)](ClO₄)₂ (2) and [Ru(dmp)₂(HMSPIP)](ClO₄)₂ (3) were synthesized and characterized. The cytotoxicity in vitro, apoptosis, cell cycle arrest, reactive oxygen species and mitochondrial membrane potential were assayed. The IC₅₀ values of complexes 1, 2 and 3 toward BEL-7402, A549, MG-63 and SK-BR-3 cell lines ranged from 10.9 ± 1.6 to 42.0 ± 3.4 μM. Complexes 1, 2 and 3 can effectively induce apoptosis and inhibit the growth of BEL-7402 cells at the G2/M phase. These complexes can enhance the level of reactive oxygen species and induce decrease in the mitochondrial membrane potential. Additionally, complex 2 can down-regulate the expression of antiapoptotic protein of Bcl-2 protein and up-regulate the levels of proapoptotic protein Bim in BEL-7402 cells.     

质量控制图用于石墨炉原子吸收光谱法检测海水中铅元素

为保证海水中重金属检测结果的准确可靠,以铅元素为例,每个工作日使用石墨炉原子吸收光谱仪平行测定铅质控样2次,收集20组有效数据后,通过计算均值、标准差得出上下控制限、警告线及辅助限,绘制出在当前实验室环境条件、仪器设备、试剂药品和人员水平等因素条件下的质量控制图。该质量控制图不仅用于实际检测过程中对检测结果进行监控,还可为该实验室的人员考核、留样复测等实验室质量控制行为提供结果判定依据。     

Single-Atom Iron Catalysts on Overhang-Eave Carbon Cages for High-Performance Oxygen Reduction Reaction

Single-atom catalysts have drawn great attention, especially in electrocatalysis. However, most of previous works focus on the enhanced catalytic properties via improving metal loading. Engineering morphologies of catalysts to facilitate mass transport through catalyst layers, thus increasing the utilization of each active site, is regarded as an appealing way for enhanced performance. Herein, we design an overhang-eave structure decorated with isolated single-atom iron sites via a silica-mediated MOF-templated approach for oxygen reduction reaction (ORR) catalysis. This catalyst demonstrates superior ORR performance in both alkaline and acidic electrolytes, comparable to the state-of-the-art Pt/C catalyst and superior to most precious-metal-free catalysts reported to date. This activity originates from its edge-rich structure, having more three-phase boundaries with enhanced mass transport of reactants to accessible single-atom iron sites (increasing the utilization of active sites), which verifies the practicability of such a synthetic approach.