增塑剂对1,1,1-三[1′-(2′-氧杂-4′-氧代-5′-氮杂-5′-甲基)十二烷基]丙烷PVC膜钠离子电极性能的影响

以1,1,1-三[1′-(2′-氧杂-4′-氧代-5′-氮杂-5′-甲基)十二烷基]丙烷(即ETH 227,Fluka No.71732)为中性载体的钠离子选择电极由于具有较强的抗钾离子干扰的能力,因而颇受注意。Guggi等首先用邻硝基苯辛醚和癸二酸二丁酯增塑,以合成的ETH227制成了K_((Na)~+,K~+)~(pot),<<10~(-2)的PVC膜钠离子电极.Jenny等以癸二酸二异辛酯为增塑剂,     

对称性和配合物的构型——Ⅱ.混合配体配合物

从库仑定律出发,采用最优化法,计算了MLaL_b′型配合物各种几何异构体的几何构型稳定化能。在计算中考虑了配体L、L′的相对电荷。 计算结果表明,对称性是决定构型的首要因素。具体构型与配体的相对电荷有关。 在若干配合物中,中心原子的dⁿ构型决定其构型的骨架。 配体对构型的作用也应予考虑。对共价性程度大的配合物,应考虑轨道重叠对构型的影响。     

A facile preparation of nanocrystalline Mo2C from graphite or carbon nanotubes

Nanocrystalline Mo₂C powders were successfully synthesized at 500 °C by reacting molybdenum chloride (MoCl₅) with C (graphite or carbon nanotube) in metallic sodium medium. X-ray powder diffractometer (XRD), transmission electron microscope (TEM), X-ray photoelectron spectroscope (XPS) and surface area analyzer (BET method) were used to characterize the samples. Experiments reveal that the carbon source used for the carbide synthesis has a great effect on the particle size and the surface area of the samples. When micro-sized graphite was used as C source the obtained nanocrystalline Mo₂C powder consists of particles of 30∼100 nm, with a surface area of 2.311 m²/g. When carbon nanotubes were used as C source, the as-synthesized Mo₂C sample is composed of particles of 20∼50 nm, with a surface area of 23.458 m²/g, which is an order of magnitude larger than that of the carbide prepared from the graphite.     

Viscometric study of poly(vinyl chloride)/poly(vinyl acetate) blends in various solvents

The intermolecular interactions between poly(vinyl chloride) (PVC) and poly(vinyl acetate) (PVAc) in tetrahydrofuran (THF), methyl ethyl ketone (MEK) and N,N^′-dimethylformamide (DMF) were thoroughly investigated by the viscosity measurement. It has been found that the solvent selected has a great influence upon the polymer-polymer interactions in solution. If using PVAc and THF, or PVAc and DMF to form polymer solvent, the intrinsic viscosity of PVC in polymer solvent of (PVAc+THF) or (PVAc+DMF) is less than in corresponding pure solvent of THF or DMF. On the contrary, if using PVAc and MEK to form polymer solvent, the intrinsic viscosity of PVC in polymer solvent of (PVAc+MEK) is larger than in pure solvent of MEK. The influence of solvent upon the polymer-polymer interactions also comes from the interaction parameter term Δb, developed from modified Krigbaum and Wall theory. If PVC/PVAc blends with the weight ratio of 1/1 was dissolved in THF or DMF, Δb<0. On the contrary, if PVC/PVAc blends with the same weight ratio was dissolved in MEK, Δb>0. These experimental results show that the compatibility of PVC/PVAc blends is greatly associated with the solvent from which polymer mixtures were cast. The agreement of these results with differential scanning calorimetry measurements of PVC/PVAc blends casting from different solvents is good.     

Synthesis and Characterization of Ag2S Nanocrystals in Hyperbranched Polyurethane at Room Temperature

Ag₂S nanoparticles in hyperbranched polyurethane matrix were prepared through the in situ reaction with thioacetamide as the sulfur source at room temperature. Transmission electron microscopic analysis revealed a uniform spherical shape for Ag₂S nanoparticles, with an average size of about 4-10 nm and a narrow size distribution. X-ray powder diffraction and UV-vis spectroscopy were also used to characterize the obtained nanoparticles     

Extraction of uranium(VI) and thorium(IV) from nitric acid solution by N-alkylcaprolactam

Extraction of uranium(VI), thorium(IV) from nitric acid has been studied with N-octylcaprolactam and N-(2-ethyl)hexylcaprolactam. Distribution coefficients of U(VI), Th(IV) and HNO₃ as a function of aqueous NHO₃ concentration, extractant concentration and temperature have been studied. The compositions of extracted species, thermodynamic parameters of extraction have been evaluated. Third phase formation in extraction of U(VI) has been studied. Back extraction behavior of U(VI) and Th(IV) from the organic phase has also been tested. The results obtained are compared with those obtained by using TBP under the same experimental conditions.     

DNA Separation by Capillary Electrophoresis with Ultraviolet Detection using Mixed Synthetic Polymers

The mixtures of two polymers, poly (N,N-dimethylacrylamide) (PDMA) and polyvinylpyrrolidone (PVP) were synthesized and used as the separation medium for double-stranded and single-stranded DNA fragments by capillary electrophoresis with UV detector. On optimal conditions, 2%w/v PDMA 2%w/v PVP can be used to separate the doublet 123/124bp in pBR322/Hae Ⅲ Markers.     

介孔分子筛的制备与苯加氢反应的催化性能

1992年美国Mobil公司的研究人员首次报道合成出具有规则孔结构的M41S系列介孔分子筛材料.由于介孔材料独特的性质,引起了人们极大的兴趣,在其合成与性能等方面进行了大量的研究,合成出了多种系列不同性能的介孔分子筛,并研究了介孔分子筛作为催化剂或催化剂载体在各类催化反应中的催化性能.     

手性聚甲基丙烯酸酯液晶聚合物的合成及相行为的研究

手性聚甲基丙烯酸酯液晶聚合物的合成及相行为的研究向前，张纪宇，张树范（中国科学院化学研究所北京１０００８０）关键词手性液晶聚合物，相行为手性侧链液晶聚合物在侧链中含有不对称碳原子的末端基，使聚合物显示Ｓｔ相．Ｓ？相层中的分子呈倾斜排列而产生自发极化．...     

新型吸附剂——球形碳化树脂的研究Ⅲ.

聚偏二氯乙烯球体经185℃预裂解后,进行960℃高温裂解,得到0.6—0.8mm粒径的球形碳化吸附树脂,碳收率为74％以上。碳化吸附树脂机械强度好,比表面为1,000M~2/g以上,对肌酸酐吸附率可达99％。