紧凑型P波段相对论返波振荡器的粒子模拟

 设计了一种紧凑型P波段相对论返波振荡器,其电动力学结构是由同轴慢波结构和同轴引出结构组成的。同轴慢波结构缩小了器件的径向尺寸;同轴引出结构缩短了器件的轴向长度,且提高了束波作用效率。通过粒子模拟研究了器件内束波作用的物理过程,模拟结果表明：器件具有结构紧凑、束波作用效率高的特点。在二极管电压700 kV,电流7 kA,导引磁场1.5 T时,器件在频率833 MHz处获得较高的微波输出,饱和后输出微波的平均功率达1.58 GW,效率约为32%,器件电磁结构尺寸仅为108 mm×856 mm。     

中等能量P波段相对论返波振荡器的理论设计与粒子模拟

提出了一种新型的中等能量P波段相对论返波振荡器,该器件将慢波结构由低波段普遍采用的同轴外波纹结构变为同轴双波纹结构,使得径向束-波作用空间扩大了2倍,一定程度上增加了器件的功率容量;另外同轴双波纹结构还较大提高了器件的时间增长率,从而有效地减小了微波输出饱和时间.经优化设计,该结构在二极管电压300 kV、电流3 kA...     

微波注入反相器基本电路的非线性效应

采用理论分析和微波注入实验相结合的方法,分别研究了以74HC04和74LVCU04A两种芯片为核心的反相器基本缓冲及数模转换电路的微波效应问题,通过反相器闩锁过程对非线性扰乱进行了机理分析,并利用微波注入实验详细分析了非线性扰乱效应的微波有效功率阈值及其随频率、脉冲宽度的变化。实验结果表明:在固定环境温度条件下,有效注入功率大于33 dBm,频率在3 GHz以下的微波均可使74HC04效应电路的非线性扰乱强度达到10%以上;有效注入功率大于30 dBm,频率在3 GHz以下的微波均可使74LVCU04A效应电路的非线性扰乱强度达到10%以上。相同非线性扰乱强度的注入有效功率阈值近似随频率的提高而增大。非线性扰乱阈值随注入微波信号脉宽变化明显,拐点为40~70 ns不等,与反相器中的互补型金属氧化物半导体器件寄生三级管的导通电流积累有关。     

基于卷绕型带状线的感应电压叠加器的初步实验

 提出了一种基于卷绕型带状线和感应电压叠加器的重复频率脉冲电子束加速器的技术方案。介绍了一台感应电压叠加器感应单元的结构设计,并建立相应的电路模型,对其响应特性进行了模拟研究。介绍了卷绕型带状线的设计原理,制作了一台输出阻抗约3 Ω、脉冲宽度约230 ns的固态化卷绕型带状脉冲形成线。利用该脉冲发生器作为馈源,对感应电压叠加器感应单元的响应特性进行了实验研究,表明感应单元响应良好。对4级感应电压叠加器分别进行了单次脉冲和5 Hz重复频率的实验研究,结果表明叠加器的输出电压约为输入电压幅值的4倍,电流效率约80%,重复频率条件下,脉冲序列重复性较好。     

基于ANSYS的芯片冷却器传热分析

针对微槽式芯片冷却器,建立三维仿真模型,分析其稳态工况下的传热情况,获得其温度和热应力分布.分析了五种不同结构形式芯片冷却器工作性能的影响,比较了纯铜和氮化硅复合物两种材质对散热性能的影响.结果表明,铜质冷却器散热性能较好,但内部热应力却高于复合材质冷却器.通过将原冷却通道分割成两个相同的小通道,可提高冷却性能,且应将...     

基于无衍射光的表面粗糙度三角测量及其灰色评定方法

 激光三角法是表面形貌非接触测量中的一种常用方法,在几何测量领域应用广泛。传统的激光三角法采用高斯光束作为指示光源,在机械扫描机构的配合下,通过对被测表面逐点扫描完成表面形貌的测量。采用新型的无衍射光替代传统激光光源,解决了普通高斯光束存在的“焦深”问题,简化了机械结构。并采用基于灰色系统理论的灰色滤波进行表面形貌的分离与评定,克服了原有方法对测量数据样本量和统计特性的依赖,并通过实验表明该系统能够准确地完成表面形貌的三维测量,所提出的灰色评定方法能够比较有效地进行表面形貌的分离与评定。     

Phase-controlled preparation of iron (oxyhydr)oxide nanocrystallines for heavy metal removal

Obtaining cost-effective iron (oxyhydr)oxide nanocrystallines is the essential prerequisite for their future extensive applications in environmental remediation, such as the removal of heavy metals from contaminated waters. Here, various phases of iron (oxyhydr)oxide nanocrystallines were simply synthesized from the phase-controlled transformation of amorphous hydrous ferric- or ferrous-oxide in thermal solution with a certain ethanol/water ratio and with the presence of oleic acid. According to this method, goethite nanorods in diameter of 3–4 nm, hematite nanocubes sized 20–30 nm, and magnetite nanoparticles in diameter of 6–7 nm were successfully obtained. The final products of this transformation can be conveniently controlled by adjusting the reaction parameters, such as pH, temperature, and ethanol/water ratio. Due to the enhanced specific surface area and probably the modifications of the surface structure of nanocrystallines, the as-synthesized goethite nanorods and magnetite nanoparticles demonstrated extremely strong As(III) affinity, with 5.8 and 54 times of As(III) adsorption, respectively, higher than the micron-sized relatives. The cost-effective feature of as-synthesized nanocrystallines and their remarkably enhanced affinity toward arsenic made them potentially applicable for the removal of arsenic and such like heavy metals from the contaminated environment.     

Growth and micromagnetic simulation of magnetite nanoparticles

Magnetite nanoparticles with different sizes and different assemblies were synthesized via hydrothermal method.Micromagnetic simulation shows the magnetite nanocubes with different sizes have different energy states,which determines the assembly mode.Magnetite nanocubes with the side length of 30-60 nm tended to be dispersed while both nanochains and dispersed nanoparticles were found to grow for the nanocubes with the side length less than 30 nm,which can be explained in the fact that the above two assembl...     

Transmission-mode GaN photocathode based on graded Al_xGa_(1-x)N buffer layer

We create a GaN photocathode based on graded Alx Ga1-x N buffer layers to overcome the influence of buffer-emission layer interface on the photoemission of transmission-mode GaN photocathodes.A gateshaped spectral response with a 260-nm starting wavelength and a 375-nm cut-off wavelength is obtained.Average quantum efficiency is 15% and short wavelength responses are almost equivalent to long wavelength ones.The fitted interface recombination velocity is 5×104 cm/s,with negligible magnitude,proving that the design of the graded buffer layers is efficient in obtaining good interface quality between the buffer and the emission layer.