梳状-线性共聚物自组装的耗散粒子动力学模拟

梳状-线性共聚物在选择性溶剂中可以自组装形成两种不同类型的聚集体, 其中第I类的自组装发生在亲、疏溶剂链之间, 而第II类发生在线性链和梳状亚结构之间. 本工作利用耗散粒子动力学方法, 分别研究了梳状-线性共聚物在侧链和主链选择性溶剂中形成的这两类聚集体, 探讨了侧链长度和侧链数量等对聚集体类型及形貌的影响. 研究表明, 第II类聚集体在侧链长度较短且侧链数量较多时容易形成. 将模拟结果与文献报道的实验结果相比较, 发现两者能较好地吻合. 此外, 本研究获得了一些在实验中较难得到的信息, 有助于进一步理解梳状-线性共聚物的自组装行为.     

钼钒砷杂多酸有机铵盐的合成及热稳定性研究

合成了4个系列（14种）钼钒砷有机铵盐,用红外光谱、pH电位滴定、DAT－TG对其进行表征,确认其分子式为[RnNH4-N]4[HPA](R=Me、Et、Pr、Bu基;n＝1、2、3、4）;并采用DTA－TG、IR进行系列盐分步切断的热性质研究。发现其稳定性随烷基增大、取代基数目增多而增加;且盐的分解是分步进行的,最终产物为杂多阴离子的组成氧化物。     

2,5—二取代—1,3—4—恶二唑和N,N‘—二酰基肼化合物的合成与生物活性

合成了１８种新的对称与不对称的２，５－二取代－１，３，４－恶二唑及Ｎ，Ｎ“＇－Ｆ二酰基肼化物，用元素分析，红外光谱，核磁氢谱和质谱确定了其结构，并对它们的杀虫，抗菌活性进行了测试，发现了数个具有较强生物活性的化合物。     

增塑剂对1,1,1-三[1′-(2′-氧杂-4′-氧代-5′-氮杂-5′-甲基)十二烷基]丙烷PVC膜钠离子电极性能的影响

以1,1,1-三[1′-(2′-氧杂-4′-氧代-5′-氮杂-5′-甲基)十二烷基]丙烷(即ETH 227,Fluka No.71732)为中性载体的钠离子选择电极由于具有较强的抗钾离子干扰的能力,因而颇受注意。Guggi等首先用邻硝基苯辛醚和癸二酸二丁酯增塑,以合成的ETH227制成了K_((Na)~+,K~+)~(pot),<<10~(-2)的PVC膜钠离子电极.Jenny等以癸二酸二异辛酯为增塑剂,     

Platinum(II)-bis(aryleneethynylene) complexes for solution-processible molecular bulk heterojunction solar cells

Four new solution-processible small-molecular platinum(II)-bis(aryleneethynylene) complexes consisting of benzothiadiazole as the electron acceptor and triphenylamine and/or thiophene as the electron donor were conveniently synthesized and characterized by physicochemical and computational methods, and utilized as the electron-donor materials in the fabrication of solution-processed bulk heterojunction (BHJ) solar cells. The effect of different electron-donor groups in these small molecules on the optoelectronic and photovoltaic properties was also examined. The optical and time-dependent density functional theory studies showed that the incorporation of stronger electron-donor groups significantly enhanced the solar-absorption abilities of the complexes. These molecular complexes can serve as good electron donors for fabricating BHJ devices by blending them with the [6,6]-phenyl-C(71)-butyric acid methyl ester (PC(70)BM) as the electron acceptor. The best power conversion efficiency of 2.37% was achieved with the open-circuit voltage of 0.83 V, short-circuit current density of 7.10 mA cm(-2) and fill factor of 0.40 under illumination of an AM 1.5 solar-cell simulator. The spin-coated thin films showed p-channel field-effect charge transport with hole mobilities of up to 2.4×10(-4) cm(2) V(-1) s(-1) for these molecules. The present work illuminates the potential of well-defined organometallic complexes in developing light-harvesting small molecules for efficient power generation in organic photovoltaics implementation.     

二(β-羟亚胺)二氯化钛配合物的合成及催化乙烯聚合

报道了3个β-羟亚胺配体(2,6-^emPr₂C₆H₃)N＝C(Ph)CH₂CH(Ph)OH(1a), (2,6-^emPr₂C₆H₃)N＝C·(Ph)CH₂C(Ph)₂OH(1b)和(2,6-^emPr₂C₆H₃)N＝C(Ph)CH₂C(C₁₂H₈)OH(1c)及其二(β-羟亚胺)二氯化钛配合物[(2,6-^emPr₂C₆H₃)N＝C(Ph)CH₂CH(Ph)O]₂TiCl₂(2a), [(2,6-^emPr₂C₆H₃)N＝C(Ph)CH₂C(Ph)₂O]₂·TiCl₂(2b)和[(2,6-^emPr₂C₆H₃)N＝C(Ph)CH₂C(C₁₂H₈)O]₂TiCl₂(2c)的合成, 并对其结构进行了表征. 在助催化剂甲基铝氧烷(MAO)作用下, 以化合物2b为主催化剂, 研究了Al/Ti摩尔比、 反应时间、 温度和聚合压力等对乙烯聚合的影响, 发现该催化体系在较宽的反应条件下均可得到很高分子量的聚乙烯, 熔点均在140℃左右. 以化合物2a~2c为主催化剂对乙烯进行催化聚合, 发现在β碳位上取代基的立体位阻对催化剂活性有很大影响. 当化合物2b上引入2个苯基取代基时, 催化剂显示出最佳催化活性.     

Structures and stability of N9, N9 − and N9 + clusters

 Ab initio molecular orbital calculations for N₉, N⁻ ₉ and N⁺ ₉ isomers were carried out at the HF/ 6-31G*, B3PW91/6-31G*, B3LYP/6-31G* and MP2/ 6-31G* levels of theory. Stable equilibrium geometric structures were determined by harmonic vibrational frequency analyses at the HF/6-31G*, B3PW91/6-31G* and B3LYP/6-31G* levels of theory. The most stable free-radical N₉ cluster is structure 1 with C _{2 v} symmetry and that of anion N⁻ ₉ is structure 3 with C _s symmetry. Only one stable structure of the N⁺ ₉ cation with C _{2 v} symmetry was predicted. Their potential application as high-energy-density materials has been examined. Received: 15 June 1999 / Accepted: 11 October 1999 / Published online: 14 March 2000     

阳、阴、非离子表面活性剂胶束对酯碱性水解的影响

应用紫外分光光度法和热动力学方法研究了芳香酸酯和正脂肪酸酯在表面活性剂ＤＴＡＢ、ＴＴＡＢ、ＣＴＡＢ、ＳＤＳ、Ｂｒｉｊ３５、ＴｒｉｔｏｎＸ－１００胶束中的碱性水解反应。阳、阴、非离子表面活性剂胶束对酯的碱性水解均有禁阻作用。讨论了胶束对酯碱性水解禁阻作用的原因。     

二甲醚反应化学的研究进展

随着GTL(Gas-to-Liquid)技术的发展,从煤炭或天然气经由合成气制备甲醇的反应过程已转向合成二甲醚的反应过程,最近的研究表明由合成气直接生产二甲醚能突破甲醇合成的热力学限制,实现单程的完全转化[1],其中煤基合成气一步法合成二甲醚较甲醇更具技术和经济优势.从物理性质看,