增量维纳滤波法在波前探测解卷积中的应用

一个常规的自适应光学系统通常包含三个重要环节：波前探测、波前校正和波前重构。因此对系统的技术要求非常高,造成系统复杂,成本昂贵。基于哈特曼-夏克波前探测的图像解卷积处理就是“事后”处理的一种,它省去了波前校正环节,使常规的自适应光学系统得到简化,降低了系统成本。其基本原理为对瞬时波面进行短时间曝光探测,同时记录相应的短时间曝光图像,来进行解卷积处理。将增量维纳滤波法应用于基于哈特曼-夏克波前探测的解卷积中,并对室内模拟点源情况下的三组畸变光斑图像数据进行了解卷积恢复处理。结果表明,将增量维纳滤波法应用于基于波前探测的解卷积是完全可行的,在室内模拟点源情况下,恢复的图像可以达到衍射极限分辨力。与维纳滤波相比,它扩展了噪声抑制因子的选取范围,在噪声抑制因子选取不正确的情况下,仍能得到比维纳滤波更好的结果。     

Emission spectra simulation of calcium plasmas in non-local thermodynamic equilibrium

We use previous high-quality experimental spectra to test the accuracy of atomic data and the validity of the collisional－radiative (CR) model used in this paper. The synthetic spectrum with electron temperature log T_e(K)=6.745 and electron density n_e=6.0×10^{13}cm^{-3}, which almost reproduces the experimental spectra, is presented. Nearly all the features of the experimental spectra were identified. The results of the CR modelling for the emission spectra of calcium plasmas all agree well with the measured spectral line intensities within the experimental error for most of the lines. Furthermore, we make the electron temperature diagnostic through the synthetic spectrum and population fractions of every ionization state as a function of charge state at different electron temperatures, as well as the electron density diagnostic through the intensity ratios of two lines of Be-like calcium and three lines of C-like calcium. A good agreement between the calculated values and the measured ones is found.     

Monte Carlo simulation of the dynamic evolution ofbinary lamellar eutectic in directional solidification

The dynamic evolution of the lamellar eutectic of binary alloys in directional solidification is studied in detail using the Monte Carlo technique. The simulated results can be summarized into two aspects: ({1}) the lamellar spacing λ is found to be inversely proportional to the chemical potential difference Δμ, predicting a linear relationship between the kinetic supercooling ΔT_k and total supercooling at the solid/liquid (S/L) interface; (2) as the solidifying velocity R is low, the dynamic product λ^{2}R shows a considerable dependence on temperature gradient G_T in the liquid in front of the S/L interface, although this dependence becomes much weaker at a high R.     

A theoretical study of the reaction of O(3P) with isobutene

The reaction of O((3)P) with isobutene ((CH(3))(2)C=CH(2)) is investigated using the unrestricted second-order M?ller-Plesset perturbation (UMP2) and complete basis set CBS-4M level methods. The minimum energy crossing point (MECP) between the singlet and triplet potential energy surfaces is located using the Newton-Lagrange method, and it is shown that the MECP plays a key role. The calculational results indicate that the site selectivity of the addition of O((3)P) to either carbon atom of the double bond of isobutene is weak, and the major product channels are CH(2)C(O)CH(3) + CH(3,) cis-/trans-CH(3)CHCHO + CH(3), (CH(3))(2)CCO + H(2), and CH(3)C(CH(2))(2) + OH, among which (CH(3))(2)CCO + H(2) is predicted to be the energetically most favorable one. The complex multichannel reaction mechanisms are revealed, and the observations in several recent experiments could be rationalized on the basis of the present calculations. The formation mechanisms of butenols are also discussed.     

A Study of the Interaction Between Cucurbit[8]uril and Alkyl‐Substituted 4‐Pyrrolidinopyridinium Salts

The interaction between cucuribit[8]uril (Q[8]) and a series of 4‐pyrrolidinopyridinium salts bearing aliphatic substituents at the pyridinium nitrogen, namely 4‐(C₄H₈N)C₅H₅NRBr, where R=Et (g1), n‐butyl (g2), n‐pentyl (g3), n‐hexyl (g4), n‐octyl (g5), n‐dodecyl (g6), has been studied in aqueous solution by ¹H NMR spectroscopy, electronic absorption spectroscopy, isothermal titration calorimetry and mass spectrometry. Single crystal X‐ray diffraction revealed the structure of the host–guest complexes for g1, g2, g3, and g5. In each case, the Q[8] contains two guest molecules in a centrosymmetric dimer. The orientation of the guest molecule changes as the alkyl chain increases in length. Interestingly, in the solid state, the inclusion complexes identified are different from those observed in solution, and furthermore, in the case of g3, Q[8] exhibits two different interactions with the guest. In solution, the length of the alkyl chain plays a significant role in determining the type of host–guest interaction present.     

Preparation and characterization of modified graphite oxide/poly(propylene carbonate) composites by solution intercalation

Modified graphite oxide (MGO)/Poly (propylene carbonate) (PPC) composites with excellent thermal and mechanical properties have been prepared via a facile solution intercalation method. An intercalated structure of MGO/PPC composites was confirmed by X-ray diffraction and scanning electron microscope. The thermal and mechanical properties of MGO/PPC composites were investigated by thermal gravimetric analysis, differential scanning calorimetric, dynamic mechanical analysis, and electronic tensile tester. Due to the nanometer-sized dispersion of layered graphite in PPC matrix and the strong interfacial interaction between MGO and PPC, the prepared MGO/PPC composites exhibit improved thermal and mechanical properties in comparison with pure PPC. Compared with pure PPC, the MGO/PPC composites show the highest thermal stability and the T_g is 13.8 °C higher than that of pure PPC, while the tensile strength (29.51 MPa) shows about 2 times higher than that of pure PPC when only 3.0 wt.% MGO is incorporated. These results indicate that this approach is an efficient method to improve the properties of PPC.     

Coatings of one monomer molecularly imprinted polymers for open tubular capillary electrochromatography

One monomer molecularly imprinted polymer coatings were first synthesized in fused silica capillary columns with 2-methacrylamidopropyl methacrylate (MAM) as single functional monomer in addition to a cross-linking monomer. Since MAM may generate no or little EOF, a strategy of precursor of polymerization, which does not interfere with the formation of defined imprints, was used to introduce an ionizable functional monomer to generate a stable electroosmotic flow for electrochromatography (CEC) by post-polymerization hydrolization. The resulting MAM-based open-tubular imprinted capillary was able to separate enantiomers by means of CEC. The resolution of enantiomers separation achieved on S-amlodipine-imprinted capillary was up to 16.1. The strong recognition ability (selectivity factor was 3.23) and high column performance (theory plates was 26,053 plates m(-1)) of template were obtained. The MIP coatings were also prepared using either S-naproxen or S-ketoprofen as template molecule. The resolutions of enantiomers separation were 2.20 and 4.56, respectively. The results illustrate that the synthesis of MIP using one monomer is not only an experimental-simplified process, but also an approach to producing chiral stationary phase with high efficiency and selectivity.     

Microsensor Chip Integrated with Gold Nanoparticles‐Modified Ultramicroelectrode Array for Improved Electroanalytical Measurement of Copper Ions

This paper presents a microsensor chip integrated with a gold nanoparticles‐modified ultramicroelectrode array (UMEA) as the working electrode for the detection of copper ions in water. The microsensor chip was fabricated with Micro‐Electromechanical System technique. Gold nanoparticles were electrodeposited onto the surface of UMEA at a constant potential of ?0.3 V. The ratio d/R_b of interelectrode spacing (d) over the individual electrode’s radius (R_b) was investigated to improve the electrochemical performance. The UMEA with a d/R_b of 20 showed the best hemispherical diffusion mode, resulted in fast response time and high current response. The gold nanoparticles increased the active surface area of UMEA by not changing the geometries of UMEA, and the current response was increased further. Incorporating the optimized characteristic of UMEA and gold nanoparticles, the microsensor showed a good linear range from 0.5 to 200 µg L^?1 of copper ions in the acetate buffer solutions with the method of square wave stripping voltammetry. Compared with the gold nanoparticles‐modified disk electrode, the gold nanoparticles‐modified UMEA showed higher sensitivity (0.024 µA mm^?2 µg^?1 L) and lower limit of detection (0.2 µg L^?1). Water samples from river water and tap water were analyzed by the microsensor chip with recovery ranging from 100.7 % to 107.8 %.     

Bulk derivatization and cation exchange restricted access media-based trap-and-elute liquid chromatography–mass spectrometry method for determination of trace estrogens in serum

Estrone (E1), estradiols (α/β-E2), and estriol (E3) are four major metabolically active estrogens exerting strong biological activities at very low circulating concentrations. This paper reports a sensitive and efficient method with automated, on-line clean-up and detection to determine trace estrogens in a small volume of serum samples using liquid chromatography–electrospray ionization–tandem mass spectrometry directly, without off-line liquid–liquid or solid-phase extraction pretreatments. Serum aliquots (charcoal stripped fetal bovine serum, 100 μL) were spiked with four estrogen standards and their corresponding isotope-labeled internal standards, then bulk derivatized with 2-fluoro-1-methyl-pyridium p-toluenesulfonate (2-FMP) to establish the calibration curves and perform method validation. Calibration was established in the concentration ranges of 5–1000 pg mL⁻¹, and demonstrated good linearity of R² from 0.9944 to 0.9997 for the four derivatized estrogens. The lower detection limits obtained were 3–7 pg mL⁻¹. Good accuracy and precision in the range of 86–112% and 2.3–11.9%, respectively, were observed for the quality control (QC) samples at low, medium, and high concentration levels. The stability tests showed that the derivatized serum samples were stable 8 h after derivatization at room temperature and at least to 48 h if stored at −20 °C. The method was applied to measure trace estrogens in real human and bovine serum samples, and three of four estrogen compounds studied were observed and quantified.     

Facile synthesis of highly dispersed palladium/polypyrrole nanocapsules for catalytic reduction of p-nitrophenol

In this study, a facile one-step redox polymerization method for the preparation of highly dispersed palladium (Pd)/polypyrrole (PPy) nanocapsules has been demonstrated. During the polymerizaion process, the formation of RB-PdCl(4)(2-) complex via an electrostatic interaction plays a key role for the preparation of Pd/PPy composite nanocapsules. The well-dispersed Pd nanocrystals with small sizes of 2-4 nm embedded in PPy nanocapsules exhibited a good catalytic activity during the catalytic reduction of p-nitrophenol into p-aminophenol by NaBH(4) in aqueous solution. The kinetic apparent rate constant (k(app)) was about 8.87×10(-3) s(-1). Moreover, the as-prepared Pd/PPy composite nanocapsules exhibited a good reusability, which could be repeatedly used for the reduction of p-nitrophenol with a high catalytic activity for at least 10 successive cycles.