The honeycomb network structure of poly[[[μ2‐1,3‐bis(1H‐benzimidazol‐2‐yl)benzene‐κ2N3:N3′](μ2‐terephthalato‐κ2O:O′)zinc(II)] ethanol solvate]

The terephthalate dianion and the bis(imidazolyl)benzene ligand of the title compound, {[Zn(C₈H₄O₄)(C₂₀H₁₄N₄)]·C₂H₆O}_n, each bridges two adjacent zinc centers, resulting in a layer‐type coordination polymer; the zinc center shows tetrahedral coordination. The disordered ethanol solvent molecules occupy the spaces between the layers and are hydrogen bonded to the layers. The two symmetry‐independent dianions lie on different inversion sites.     

铁羰基络合物制备的一氧化碳加氢催化剂的研究

本文采用Ｆｅ＿３（ＣＯ）＿（１２）制备担载型络合物催化剂。采用程序升温反应技术考察了这类催化剂（ＣＯ＋Ｈ＿２）的反应性能，井使用紫外漫反射光谱和穆斯堡尔谱对催化剂进行了表征。经２５０℃和１５０℃还原的Ｆｅ／γ－Ａｌ＿２Ｏ＿３催化剂不仅活性远远高于４５０℃还原的Ｆｅ／γ－Ａｌ＿２Ｏ＿３，而且前者在反应过程中有乙烯和乙烷生成，后者则只有甲烷生成。经２５０℃还原的Ｆｅ／分子筛催化剂的活性高于４５０℃还原的Ｆｅ／分子筛催化剂，而且前者在反应过程中有乙烯、乙烷和丙烯生成，后者则只有甲烷生成。紫外漫反射谱和穆斯堡尔谱结果表明：较温和条件下活化的催化剂上有金属于属键骨架的存在。     

Effect of drug-loading methods on drug load, encapsulation efficiency and release properties of alginate/poly-L-arginine/chitosan ternary complex microcapsules

The drug-loaded alginate/poly-L-arginine/chitosan ternary complex microcapsules were prepared by mixing method, absorption method and the combined method of mixing and absorption, respectively. The effect of drug-loading methods on drug load, the encapsulation efficiency and the release properties of the complex microcapsules were investigated. The results showed that the absorption process is a dominating factor to greatly increase the drug load of Hb into microcapsules. Upon loading Hb into microcapsules by combined method of mixing and absorption, the drug load (19.9%) is up to the maximum value, and the encapsulation efficiency is 93.8%. Moreover, the drug release is a zero-order kinetics process for the ternary complex microcapsules made by mixing. For the complex microcapsules made by absorption, the drug release is a first-order kinetics. However, for the complex microcapsules made by combining the mixing and the absorption, the drug release obeys a first-order kinetics during the first eighteen hours, changing afterwards to a zero-order kinetics process. Effect of drug-loading methods on drug load and encapsulation efficiency of alginate/poly-L-arginine/chitosan ternary complex microcapsules.     

ToF-SIMS analysis of surface-anchored organometallic clusters

ToF-SIMS analysis of the organometallic cluster Os₃(μ-H)(CO)₁₀(μ-SCH₂CH₂SH) chemically attached onto a silver or gold surface, and of the cluster fragment Os₃(μ-H)(CO)₁₀(μ-OSi) on a silica surface, allows for identification of the surface organometallic species, and also gives information on its reactivity.     

高阻隔材料——偏氯乙烯悬浮共聚树脂

本文介绍偏氯乙烯悬浮共聚树脂的优异阻隔性能、合成配方与工艺。     

磷脂酰胆碱与牛血清白蛋白相互作用的FT-IR研究

利用傅立叶变换红外(FT-IR)和拉曼(FT-Raman)光谱研究了高浓度磷脂酰胆碱(PC)与牛血清白蛋白(BSA)的相互作用,及Eu3＋对该作用的影响.FT-IR结果显示,PC/BSA混合体系中二者的相互作用主要发生在PC头部极性基团,且这一作用随BSA含量的增加而增强,作用后蛋白质二级结构中α螺旋的比例有所增加. FT-Raman光谱说明PC与BSA的相互作用影响磷脂CH链的排列有序程度. PC/BSA/Eu3＋体系的红外光谱显示, Eu3＋与PC的磷氧键发生了强相互作用,并使蛋白α螺旋的比例进一步增加.     

乙苯脱氢铁系催化剂的穆斯堡尔谱研究

用穆斯堡尔法对乙苯脱氢铁系催化剂在反应条件下进行了研究。结果表明,反应前催化剂中的铁主要以α-Fe_2O_3和α-FeOOH的形式存在,在反应中主要组分为Fe_3O_4。用K_2CO_3和α-Fe_2O_3在高温下加热可以生成KFeO_2,后者在室温下很不稳定,在同样条件下很容易转化为Fe_3O_4。但钾的存在可促进催化剂中Fe~(3+)还原为Fe~(2+),有利于电子的交换,对催化活性起着助催作用。     

Novel alginate-poly(L-histidine) microcapsules as drug carriers: in vitro protein release and short term stability

Spherical, smooth-surfaced and mechanically stable alginate-poly(L-histidine) (PLHis) microcapsules with narrow particle size distributions were prepared by incubating calcium alginate beads in aqueous solutions of PLHis. The in vitro release characteristics, drug loading and encapsulation efficiency of the microcapsules were investigated using bovine erythrocytes hemoglobin (Hb) as a model drug. The results showed that the concentration of Ca(2+) ions had a considerable effect on the drug loading, encapsulation efficiency and in vitro release behavior of the microcapsules. When the concentration of CaCl(2) in the PLHis solution was increased from 0 to 3.0% (w/v), the drug loading and encapsulation efficiency decreased significantly from 38.0 to 4.3% and from 92.9 to 8.0%, respectively, while the total cumulative release of Hb from microcapsules in phosphate buffered saline solution (PBS, pH 6.8) decreased from 96.2 to 72.8% in 24 h. No significant protein release was observed during 70 h of incubation in hydrochloric acid solution (pH 1.2). However, under neutral conditions (PBS, pH 6.8), the Hb was completely and stably released within 24-70 h. An explosion test showed that the stability of alginate-PLHis microcapsules depended strongly on the concentration of PLHis and the calcium ions in solution. [Diagram: see text] Microscopy photo of Hb-loaded alginate-PLHis microcapsules.     

CRYSTALLIZATION AND MECHANICAL PROPERTIES OF POLYPROPYLENE FILLED WITH SiO2 NANOPARTICLES

Oleic acid （OA）-modified SiO2 （OA-m-SiO2） nanoparticles were prepared using surface modification method. Infrared spectroscopy （IR） was used to investigate the structure of the OA-m-SiO2 nanoparticles, and the result showed that OA attached onto the surface of SiO2 nanoparticles through esterification. Effect of OA concentration on the dispersion stability of OA-m-SiO2 in heptane was also studied, and the result indicated that OA-m-SiO2 nanoparticles were dispersed in heptane more stably than the unmodified ones. OA-m-SiO2 nanoparticles can also be dispersed in polypropylene （PP） matrix in nano-scale. The effect of OA-m-SiO2 on crystallization of PP was studied by means of DSC. It was found that the introduction of OA-m-SiO2 resulted in significant increase in the crystallization temperature, crystallization degree and crystallization rate of PP, and OA-m-SiO2 could effectively induce the formation of β-crystal PP. Effect of OA-m-SiO2 content on mechanical properties of PP/OA-m-SiO2 nanocomposites was also studied. The results show that OA-m-SiO2 can significantly improve the mechanical properties of PP.     

Bis[bis­(methoxy­carbimido)amine‐κ2N,N′]bis­(perchlorato‐κO)copper(II) bis­[bis­(methoxy­carbimido)amine‐κ2N,N′]bis­(methanol‐κO)copper(II) bis­(perchlorate) methanol disolvate

The title compound, [Cu(ClO₄)₂(C₄H₉N₃O₂)₂][Cu(C₄H₉N₃O₂)₂(CH₄O)₂](ClO₄)₂·2CH₃OH, comprises two independent Cu^II species lying on different inversion sites. In the Cu complexes, a distorted octa­hedral geometry arises (from basic square‐planar N₄ coordination) from the weak coordination of two perchlorate ions (as Cu—O) in one species and two methanol mol­ecules in the other (also as Cu—O). Inter­actions between the O atoms of the perchlorate anions or methanol groups and the imide or amine NH groups afford an extensive inter­molecular hydrogen‐bonding network.