二次包覆法制备煤沥青基硅/碳复合物及其锂离子电池性能

本文采用市售纳米硅为硅源,以软化点低、得碳率高、价格便宜的煤沥青作为碳源,通过两步包覆法制备了煤沥青基硅/碳(Si/C/C)复合物,并研究其作为锂离子电池负极材料的电化学性能。 结果表明,所得复合物的粒径在300~350 nm间,Si纳米粒子被C包覆并相互连结成C-Si-C网络结构,其中Si含量为27%的硅/碳复合物(Si/C/C-27%)作为锂电池电极材料表现了良好的储锂性能。 在0.1 A/g的小电流密度下,Si/C/C-27%的放电比容量为1281 mA·h/g;在3 A/g的大电流密度下,其放电比容量仍能保持在582 mA·h/g,表现了良好的倍率性能。Si/C/C-27%在2 A/g的电流密度下经过100次的循环后其比容量保持率为76.61%,表现了良好的循环稳定性。 相比于煤沥青基碳的一次包覆所得的硅/碳复合材料(Si/C),Si/C/C有效提高了Si纳米粒子的导电性并抑制了其在嵌锂和脱锂过程中的体积膨胀。 本文提出的二次包覆的新方法为制备具有优异电化学性能的锂离子电池负极材料提供了新的研究思路。     

Supramolecular Assemblies of Three New Metronidazole Derivatives Constructed with Various Dihydroxy-benzoic Acids via Hydrogen Bonds

Metronidazole(MTZ) is an important antibiotic, which has been widely applied to cure protozoal and bacterial diseases for human beings or animals. Herein, three novel drug supramolecular crystals constructed by MTZ with 2,5-dihydroxy-benzoic acid(2,5-DHBA)(1), 2,6-dihydroxy-benzoic acid(2,6-DHBA)(2) and 3,5-dihydroxy-benzoic acid(3,5-DHBA)(3), respectively, have been discovered. The hydrogen bonds of N-H···O(O-H···N), C-H···O and O-H···O play important roles in the 3D supramolecular framework formation for crystals 1-3. Interestingly, due to the vary locations of the substituent groups, the two-dimensional layers in crystals 1 or 2 are constructed via intermolecular hydrogen bonds between MTZ and 2,5-DHBA or 2,6-DHBA, while in crystal 3 water molecules play a significant role except the intermolecular hydrogen bonds between MTZ and 3,5-DHBA. In addition, five synthons of I R₂²(8), II R₃³(9) in crystal 1, III R₁²(4), IV R₂²(8) in crystal 2 and V R₂²(7) in crystal 3 formed through various hydrogen bonds are founded in this work. Systematic studies of syntheses, crystal structures and thermal analysis are reported.     

17.1%-Efficiency organic photovoltaic cell enabled with two higher-LUMO-level acceptor guests as the quaternary strategy

Quaternary blended organic solar cells utilize four blended material components(one donor plus three acceptors, two donors and two acceptors, or three donors plus one acceptor) as the active layer materials. The use of four material components allows us to have more material selections and more mechanism choices to improve the photon-to-electron conversion efficiency. In this contribution, we present a new case of quaternary material system, that shows 17.1% efficiency obtained by adding IDIC and PC_(71)BM as the guest acceptors of the host binary of PM6:Y6. The lowest unoccupied molecular orbital(LUMO) levels of IDIC and PC_(71)BM are both higher than that of Y6, which is one reason to obtain increased open-circuit voltage(V_(oc)) in the quaternary device. Upon introduction of IDIC and PC_(71)BM as the acceptor guests, the hole and electron mobilities are both increased, which contributes to the increased short-circuit current-density(J_(sc)). Effects of the weight ratios of the three acceptor components are investigated, which demonstrates that the increased hole and electron mobilities, the accelerated hole-transfer, and the reduced monomolecular recombination are the factors contributing to the increased J_(sc)and fill-factor. This case of quaternary device demonstrates the applicability of the quaternary strategy in increasing the device functions and hence the efficiencies in the field of organic photovoltaic cells.     

[100]LiF单晶在60 GPa以内冲击加载下的高压屈服强度特性

获取光学窗口自身的高压强度特性是开展材料高压高应变率冲击响应行为精密测量和数据反演的重要基础。利用平板撞击和双屈服面法,通过冲击-卸载、冲击-再加载原位粒子速度剖面精细测量和数据反演,获得了约60 GPa范围内[100]LiF屈服强度特性随冲击压力的变化规律。结果表明:在实验压力范围内,[100]LiF的屈服强度随加载压力的提高而显著提高,压力硬化效应显著;同时,LiF在冲击加载下的屈服强度高于磁驱准等熵加载结果,应变率硬化效应强于热软化效应。采用Huang-Asay模型确定了可描述冲击加载[100]LiF强度特性的本构模型参数,为LiF在强度、相变、层断裂等加窗测量实验中的深入应用和数据准确解读提供了重要支撑。     

EXISTENCE AND UNIQUENESS OF THE GLOBAL L1 SOLUTION OF THE EULER EQUATIONS FOR CHAPLYGIN GAS

In this paper,we establish the global existence and uniqueness of the solution of the Cauchy problem of a one-dimensional compressible isentropic Euler system f...     

Effects of High-Intensity Ultrasound Pretreatment on Structure,Properties, and Enzymolysis of Walnut Protein Isolate

The purpose of this paper was to investigate the effect of high-intensity ultrasonication (HIU) pretreatment before enzymolysis on structural conformations of walnut protein isolate (WPI) and antioxidant activity of its hydrolysates. Aqueous WPI suspensions were subjected to ultrasonic processing at different power levels (600–2000 W) and times (5–30 min), and then changes in the particle size, zeta (ζ) potential, and structure of WPI were investigated, and antioxidant activity of its hydrolysates was determined. The particle size of the particles of aqueous WPI suspensions was decreased after ultrasound, indicating that sonication destroyed protein aggregates. The ζ-potential values of a protein solution significantly changed after sonication, demonstrating that the original dense structure of the protein was destroyed. Fourier transform infrared spectroscopy indicated a change in the secondary structure of WPI after sonication, with a decrease in β-turn and an increase in α-helix, β-sheet, and random coil content. Two absorption peaks of WPI were generated, and the fluorescence emission intensity of the proteins decreased after ultrasonic treatment, indicating that the changes in protein tertiary structure occurred. Moreover, the degree of hydrolysis and the antioxidant activity of the WPI hydrolysates increased after sonication. These results suggest that HIU pretreatment is a potential tool for improving the functional properties of walnut proteins.     

煅烧温度对Li4Ti5O12的电化学性能的影响

用溶胶-凝胶法制备了尖晶石型锂钛复合氧化物L i4Ti5O12,并研究了煅烧温度对其电化学性能的影响。结果表明,在800℃煅烧12 h得L i4Ti5O12,晶型良好,粒度较均匀。并且表现出良好的电化学性能,循环10次后比容量仍保持在160 mAh.g-1左右。     

2-十二烷基二硫代-4-苯基-1,3,4-噻二唑-5-硫酮的合成及其对铜的缓蚀性能

合成了2-十二烷基二硫代-4-苯基-1,3,4-噻二唑-5-硫酮(DPTT),用元素分析、IR1、H NMR等技术对化合物进行了结构表征.采用动态旋转挂片法考察了DPTT和苯并三唑(BTA)复配时对铜的缓蚀作用.结果表明,单一DPTT在浓度为3.0 mg/L时缓蚀效果最佳;DPTT与BTA复配使用时显示出较好的协同效应,1.0 mg/L DPTT和1.0 mg/L BTA复配时缓蚀效果最好.     

胶质液体泡沫(CLA)的形成及其稳定性研究

以研究胶质液体泡沫(CLA)内部结构及其特性为最终目的, 对组成为十二烷基醇聚氧乙烯(3)醚(AEO-3)/正癸烷/十二烷基硫酸钠(SDS)/水的CLA体系形成过程和稳定动力学行为进行了电导率测定和光学显微观察. 通过上述两过程的电导率变化探明了CLA的形成和稳定性动力学行为, 并被光学显微照片所证实. 实验结果表明CLA的形成是一个低能量乳化过程, 经历了水相泡沫化→油相替代气泡乳化→CLA形成. 在整个乳化过程中, 没有发生相的转变现象, CLA呈O/W型乳状液. 其稳定性并不遵守一级动力学模型. 在常温下, 其电导率曲线呈直线关系; 当温度超过318.15 K时, 其电导率曲线近似于Langmuir等温线形. 并可用Sigmoidal模型σ_t=(σ₁－σ₂)/[1＋e^(t－t₀)/S] ＋σ₂较好的拟合, 式中, σ_t表示t 时的电导率值(μS/cm); t表示时间(min); σ₁, σ₂分别代表存储过程中电导率最小值和最大值(μS/cm); t₀对应于σ_t等于 1/2(σ₁＋σ₂)的时间t值(min); S描述了电导率曲线陡峭程度(min). 并提出了CLA的破乳过程包括液膜排液和液膜破裂两个阶段, 同时伴随有絮凝过程发生的稳定性机理.