AlN/Al dual protective coatings on NdFeB by DC magnetron sputtering

AlN/Al dual protective coatings were prepared on NdFeB by DC magnetron sputtering in a home-made industrial apparatus. Comparing with Al coating, AlN/Al coatings have a denser structure of an outmost AlN amorphous layer following an inner Al columnar crystal layer. The coatings and NdFeB substrate combine well, and moreover, there is occurrence of metallurgy bonding in the interface layer. Both Al and AlN/Al coatings have a good protective ability to NdFeB. Especially, the corrosion resistance of AlN/Al coated NdFeB is improved largely. AlN/Al and Al protective coatings not only do not deteriorate the magnetic properties of NdFeB, but contribute to their slight increase.     

准相位型光子筛设计

提出了一种准相位型光子筛。该准相位型光子筛通过改变暗环上小孔直径与带宽的比值,对焦点处的相位分布进行调制,使通过亮环和暗环上小孔的光波在焦点处发生相长干涉,生成聚焦光斑。该准相位型光子筛无需对基底进行特殊处理,即可完成相位型光子筛的制作,降低了加工难度。和普通振幅型光子筛相比,在相同最小加工尺寸的条件下,准相位型光子筛具有较大的数值孔径,可降低聚焦光斑尺寸。并且,和多区光子筛相比,在同样的最小加工尺寸及数值孔径的条件下,准相位型光子筛光斑尺寸及质量均优于对方。为大数值孔径光子筛设计提供了一种新的设计方法。     

Computer design of a compact cyclotron

Here we present results of the computer design of the structural elements of a compact cyclotron by the example of HITFiL cyclotron selected as the driving accelerator that is under construction at the Institute of Modern Physics (Lanzhou, China). In the article a complex approach to modeling of the compact cyclotron, including calculation of electromagnetic fields of the structural elements and beam dynamics calculations, is described. The existing design data on the axial injection, magnetic, acceleration and extraction systems of the cyclotron are used as a starting point in the simulation. Some of the upgrades of the cyclotron structural elements were proposed, which led to substantial improvement of the beam quality and transmission.     

Tunable self-shifting Bloch modes in anisotropic hexagonal photonic lattices

We study controllable self-shifting Bloch modes in anisotropic hexagonal photonic lattices. The shifting results from a deformed band structure due to deformation of the index distribution in each unit cell. By reconfiguration of the index profile of the unit cell, the direction in which the Bloch modes move can be controlled. Our theoretical predictions are experimentally demonstrated in hexagonal lattices optically induced in an anisotropic nonlinear crystal.     

卷绕式螺旋形薄膜介质脉冲形成线设计

采用模块化结构,设计了一种卷绕式螺旋形薄膜介质脉冲形成线,并且对绝缘材料、电极材料的选择依据进行了分析。基于模块化卷绕式脉冲形成线,研制的重复频率脉冲方波产生器采用4个开关同步触发四级形成线模块,从而实现多模块的电压串联叠加,以达到产生高压的目的。开关采用气体火花间隙开关,每级开关及充放电采用电感隔离。研制的脉冲产生器输出电压220 kV,脉冲宽度182 ns,前沿50 ns,可10 Hz重复频率稳定运行。     

Infrared broadband emission of bismuth–thulium co-doped lanthanum–aluminum–silica glasses

The Bi–Tm co-doped SiO₂–Al₂O₃–La₂O₃ (SAL) glasses, which exhibited a broadband near-infrared (NIR) emission was investigated by the optical absorption and photoluminescence spectra. The super broadband near-infrared emission from 1000 to 2100 nm, which covered the whole O, E, S, C and L bands, was observed in the Bi–Tm co-doped samples, as a result of the overlap of the Bi-related emission band (centered at 1270 nm) and the emission from Tm^{3+ 3}H₄→³F₄ transition (1440 nm) as well as Tm^{3+ 3}F₄→³H₆ transition (1800 nm). Relative luminescence intensity at 1270, 1440 and 1800 nm wavelength varied depending on the mixing ratio of Bi and Tm and the full-width at half-maximum (FWHM) extending from 1000 to 1600 nm could be 400 nm. These results indicated that Bi–Tm co-doped SiO₂–Al₂O₃–La₂O₃ glasses could provide potential applications in tunable lasers as well as the broadband optical amplifiers in WDM system.     

用近红外无损肌氧及运动心率检测技术评定100 m极量强度运动对心脏冲击影响

利用连续双波长近红外光技术测量肌肉中血红蛋白含氧量的变化情况,同时应用运动心率无线实时采集设备,设计了检测实时肌肉组织血氧含量和瞬时心率实验方案,对6名健康男性进行了100 m跑同步实测实验。实验表明,肌肉组织氧合血红蛋白浓度在100 m跑结束后继续降低,达到最低值的时刻滞后于运动结束时刻的时间为(6.65±1.10)s;心率则在运动结束后继续上升,达到最高值的时刻滞后于运动结束时刻的时间为(8.00±1.57)s。这些结果显示了双波长近红外光组织氧测试技术和运动心率无线实时采集系统能够正确检测极量强度运动时的血氧参数和心率,揭示了极量强度运动过程中肌肉中氧运输与消耗的过程及其与心率之间的动力学特征。     

正压流体中具有β效应与地形效应的强迫Rossby孤立波

正压流体中,从有外源的准地转位涡方程出发采用摄动方法和时空伸长变换推导了具有β效应、地形效应和外源的强迫Rossby孤立波方程,得到孤立Rossby波振幅的演变满足带有地形与外源强迫的非齐次 Boussinesq方程的结论. 通过分析孤立Rossby波振幅的演变,指出β效应、地形效应以及外源都是诱导Rossby孤立波产生的重要因素,说明在地形强迫效应和非线性作用相平衡的假定下,Rossby孤立波振幅的演变满足非齐次Boussinesq方程,给出在切变基本气流下地形和正压流体中R     

Size controlled synthesis of semiconductor nanocrystals in a continuous-flow mode microcapillary reactor

A microcapillary reactor with 320 μm inner diameter was utilized for CdSe nanoparticle synthesis. The influence of the reaction temperature and flow rate of precursors on the size and size distribution of prepared CdSe nanoparticles was systematically studied. The as-prepared nanoparticles exhibit sharp excitonic absorption and photoluminescence peak (FWHM 30 nm) with a quantum-yield around 10–40%. The microcapillary reactor was also used for CdSe/ZnS core-shell nanoparticle synthesis in continuous-flow mode. The quantum yield of the core-shell nanoparticles was found to be considerably influenced by the reactor temperature and have a close correlation with the thickness of ZnS shell under growth. An optimized quantum yield up to 70% was obtained for the CdSe/ZnS core-shell nanoparticles.