异烟肼及其代谢产物的串联质谱分析

报道了血样中异烟肼的串联质谱快速分析，利用这种分析方法，证实了一男性死者血样中异烟肼及其代谢产物的存在，从而为法庭诉讼提供了可靠的证据。这种方法具有快速性，高灵敏度和高选择性，适合于需要快速分析的场合。     

载波钝化和钼酸盐后处理对不锈钢钝化膜性能的影响

一般认为交流电对金属的腐蚀过程具有加速作用,但我们发现,在直流电位基础上叠加适当波形、幅值和频率的交流电对不锈钢进行载波钝化,尔后再进行适当后处理可使钝化膜的稳定性提高,我们曾就不经后处理的载波钝化过程进行过探讨,本文着重探讨钼酸盐后处理对载波钝化膜表面状态和化学稳定性改善的作用机理。     

Effect of Electrical Pulse Forms on the CO2 Reforming of Methane Using Atmospheric Dielectric Barrier Discharge

Methane conversion using an electric discharge has been studied for many years. Recently, many research groups have developed high-frequency pulsed plasma reaction for methane conversion to higher hydrocarbons and synthesis gas. CO₂ reforming of methane to synthesis gas has also attracted considerable interest as a method of utilization of the greenhouse gases, CO₂ and CH₄, which occupy most of man-made greenhouse gases. In this study, the influence of pulse form of applied voltage on methane and carbon dioxide conversions and product selectivity has been investigated using a cylindrical type DBD reactor. For this purpose, two kinds of power supply were compared, that is, AC power supply which has a high-frequency sinusoidal wave form, and AC pulse power supply which has modified AC pulse wave form. The conversions of methane and carbon dioxide were enhanced using pulsed plasma. The lower pulse width was more profitable economically.     

Tunable magnetic arrangement of iron oxide nanoparticles in situ synthesized on the solid substrate from diblock copolymer micelles

Hexagonal arrangement of iron oxide nanoparticles was fabricated by utilizing a single-layered film of diblock copolymer micelles. The synthesis was directly performed on the solid substrate by oxygen plasma with preserving the dimensional order of micelles so that separate procedures for synthesis and deposition of nanoparticles were not necessary. Since the oxygen plasma treatment also eliminated polymers, pure patterns of iron oxide nanoparticles were obtained. Moreover, easy control over the size of nanoparticles enabled us to selectively create a ferrimagnetic or a superparamagnetic pattern of iron oxide nanoparticles without altering the fabrication process.     

用亚铁氰化钛钾从模拟高放废液中吸附Cs研究

本文研究了溶胶-凝胶法合成的无机离子交换剂亚铁氰化钛钾的耐酸性和辐照稳定性等性能，测定了从模拟酸性高放废液中主要常量组分离子相对于Cs的分离系数，研究了流速对Cs吸附曲线的影响。实验结果表明，该交换剂具有良好的辐照稳定性，交换剂经2×106Gy的辐照，亚铁氰化钛钾对Cs的表观交换容量下降6～7％，为0．873mmolCs／g干交换剂。在0．5～1．5mol／LHNO3中具有良好的化学稳定性。在模拟酸性高放废液中对几种离子的选择吸附顺序为：Cs＞＞M＞Fe＞Sr＞Na＞Cr＞Nd，Mn，该交换剂具有较高的吸附容量，对Cs具有良好的选择性，有希望用作从酸性高放废液中去除Cs的材料。     

LaNi4Fe催化合成氨反应性能的研究

用冶金法、还原扩散法、共沉淀法制得了LaNiFe,并对其催化合成氨反应性能进行了研究。实验结果表明:还原扩散法,共沉淀法制得的LaNi_4Fe催化活性均比冶金法好。X—射线分析指出LaNi_4Fe在合成氨反应过程中变为Ni_4Fe和LaN。