氟烷基化和氟烷氧基化的研究18.2-卤四氟碘乙烷与含氮亲核试剂的反应

2-卤四氟碘乙烷[1,XCF_2CF_2I,(X=Cl或l)]能与多种亲核试剂按自由基或亲卤机理反应。1在没有溶剂时,于室温下,可以和胺作用迅速形成分子络合物。本文则进一步报道1与含氮亲核试剂在各种溶剂中反应的结果。     

高效液相色谱手性流动相添加剂法拆分酪氨酸甲酯对映体

分别将β-环糊精、羟丙基-β-环糊精作为手性流动相添加剂，研究了酪氨酸甲酯对映体在反相HPLC系统中的拆分，考察了流动相种类、pH和手性流动相添加剂浓度对手性拆分的影响，建立了β-环糊精手性流动相添加剂法拆分酪氨酸甲酯对映体的方法。     

化学键合吸附剂的合成及吸附行为

在无定型硅胶上化学键合十八烷基三氯硅烷，键合率17%-20％，粒度5μm-10μm，以此键合的吸附剂可有效地吸附香烟烟气中的焦油、亚硝胺，吸附率分别为15%-18％和37%-43％，研究了化学键合吸附剂的粒度和加入量对吸附性能的影响。     

从静态应力松弛实验求材料准松弛时间谱的一种数值计算方法

避开繁琐困难的函数求解过程，采用数值计算方法，从常规的静态应力松弛实验，直接求被测材料的松弛单元的表现松弛强度．主松弛时间τ０由单－ＭＡＸＷＥＬＬ模型求得，其他松弛时间分别约取为１０（－２）·τ０，１０（－１）·τ０，１０１·τ０，１０３·τ０。应力松弛万程取５参数模型，记为谱的强度ａｉ（或Ａｉ）通过多元线性回归，由最小二乘法确定．对一种天然橡胶试样在不同温度下的松弛曲线进行处理，回归值与原始实验值吻合良好，不同温度下的松弛单元对总松弛的贡献，反映出温度对松弛过程的活化作用．     

BaCe0.8Ho0.2O3-a陶瓷的性质与应用

Ceramic BaCe0.8Ho0.2O3-α with orthorhombic perovskite structure was prepared by conventional solid state reaction, and its conductivity and ionic transport number were measured by ac impedance spectroscopy and gas concentration cell methods in the temperature range of 600-1000 ℃ in wet hydrogen and wet air, respectively. Using the ceramics as solid electrolyte and porous platinum as electrodes, the hydrogen-air fuel cell was constructed, and the cell performance at temperature from 600-1000 ℃ was examined. The results indicate that the specimen was a pure protonic conductor with the protonic transport number of 1 at temperature from 600-900 ℃ in wet hydrogen, a mixed conductor of proton and electron with the protonic transport number of 0.99 at 1000 ℃. The electronic conduction could be neglected in this case, thus the total conductivity in wet hydrogen was approximately regarded as protonic conductivity. In wet air, the specimen was a mixed conductor of proton, oxide ion and electron hole. The protonic transport numbers were 0.01-0.09, and the oxide-ionic transport numbers were 0.27-0.32. The oxide ionic conductivity was increased with the increase of temperature, but the protonic conductivity displayed a maximum at 900 ℃, due to the combined increase in mobility and depletion of the carriers. The fuel cell could work stably. At 1000 ℃, the maximum short-circuit current density and power output density were 346 mA/cm^2 and 80 mW/cm^2, respectively.     

Isolation, Mapping, DNA Sequence and RFLPs Studies of Random Single-Copy DNA Segments on Human X Chromosome

Using the total human/mouse DNA as the probe, screening has been carried out three times with in situ plaque hybridization to obtain the single-copy DNA sequence from the human X chromosome genomic library. The effective rate of screening is 1. 45%. DNAs from clones containing single-copy inserts have been analyzed by a panel of hybrid cells with or without human X chromosome. Three segments, designated by DXFD52,73,75, are mapped to the X chromosome. DXFD52 has been precisely localized on Xq12-q13 with in situ chromosomal hybridization. DXFD52 has been partially sequenced. The results indicate that DXFD52 is a new isolated single-copy segment on the X chromosome. Great progress in the RFLPs study with DXFD52 has been achieved in the population of Chongqing, Sichuan Province. The results show that the DXFD52 can be used to detect the RFLP with Hind Ⅲ, Bgl Ⅱ, and Hinf Ⅰ. DXFD52 will be a potential "landmark" for the construction of the complete linkage map of human genome and the analysis of genomic s     

CHARACTERIZATION OF AMPHIPHILIC AND MICROPHASE SEPARATED GRAFT COPOLYMERS Ⅱ SURFACE CHARACTERIZATION AND IN VITRO BLOOD-COMPATIBILITY ASSESSMENT OF POLYSTYRENE-GRAFT-ω-STEARYLPOLY (ETHYLENE OXIDE)*

This paper reported the research results concerning the surface characterization ofpolystyrene-graft-w-stearyl poly(ethylene oxide) (PS-g-SPEO) by means of XPS,contactangle measurement and TEM, and its in vitro blood compatibility assessment by measuringthe plasma recalcification time (RT) and partial thromboplastin time (PTT). The XPSresults demonstrated that the surface and bulk composition of the PS-g-SPEO graftcopolymers differ remarkably from each other,and that SPEO component was constantlyenriched at the copolymer/air interface. Contact angle studies indicated that the surfacewater wettability can be adjusted effectively by changing the composition of the copolymer.PS-g-SPEO graft copolymers can undergo microphase separation as clearly illustrated byTEM photographs. The relationship between the surface properties of PS-g-SPEO graftcopolymer and its blood compatibility was also discussed.     

含氧膦结构的可溶性感光聚酰亚胺合成与表征

聚酰亚胺(PI)是一类综合性能优异的功能性材料,广泛应用于航天、航空及电子工业等领域[1].感光聚酰亚胺可以采用光刻工艺,大大简化了其应用加工程序[2,3],因而备受人们所青睐.含查尔酮结构的聚合物对UV辐射敏感度高和化学稳定性好,最近被广泛的研究和应用[4～7].主链含查尔酮结     

高分子化学课程中若干论题的进展

高分子化学课程中下列五个论题被加以修正和补充:(1)1,2-二取代乙烯单体的聚合;(2)乙烯基单体聚合时的键连方式;(3)自由基聚合的自动加速;(4)引发转移和引发转移终止剂;(5)氢转移聚合和基因转移聚合。     

Y2O3, La2O3, Sm2O3对氧化铝瓷烧结及力学性能的影响

研究了3种稀土氧化物对氧化铝陶瓷烧结性能和力学性能的影响.结果表明 含Y2O3,La2O3,Sm2O3的添加剂促进了氧化铝瓷的烧结,提高了氧化铝瓷的力学性能.Y2O3和Sm2O3掺量为0.50%,La2O3掺量为0.75%时氧化铝瓷在1600或1620 ℃保温2 h烧结,相对密度达98.9%以上,强度超过439 MPa,断裂韧性达5.15 MPa·m1/2以上.微观结构分析表明,Y2O3,La2O3,Sm2O3抑止氧化铝晶粒生长,细化晶粒,使晶粒尺寸较均匀形成致密化结构.