Enhanced optical limiting properties in suspensions of CdO nanowires

Optical limiting (OL) properties of CdO nanowires in water and ethanol were investigated by using nanosecond laser pulses at 532 nm. Experimental results show that suspension of CdO nanowires in ethanol exhibits better OL property than solution of C₆₀ in toluene and suspension of CdO nanowires in water. The dominant mechanism for the observed enhanced optical limiting in ethanol suspensions of CdO nanowires is due to nonlinear scattering.     

正交试验法优选都梁凝胶贴剂的提取工艺

采用超声法优选都梁凝胶贴剂中白芷、川芎药对的最佳提取工艺.按照L9（34）正交试验设计,以欧前胡素、阿魏酸的转移率及干浸膏得率为综合评价指标,用高效液相色谱法进行含量测定.结果表明,都梁凝胶贴剂中白芷、川芎药对的最佳超声提取工艺为：8倍量的80％乙醇提取2次,每次超声40min;此时浸膏中欧前胡素的平均含量为0.1379％,阿魏酸的平均含量为0.1410％.本实验所建立的高效液相色谱法的准确度、精密度与重现性良好;提取工艺简便,合理.     

Study on fast linear scanning for a new laser scanner

In the field of lidar system design, there is a need for laser scanners that offer fast linear scanning, are small size and have small a rotational inertia moment. Currently, laser scanners do not meet the above needs. A new laser scanner based on two amplified piezoelectric actuators is designed in this paper. The laser scanner has small size, high mechanical resonance frequencies and a small rotational inertia moment. The size of the mirror is 20 mm×15 mm. To achieve fast linear scanning performance, an open-loop controller is designed to compensate the hysteresis behavior and to restrain oscillations that are caused by the mechanical resonances of the scanner's mechanical structure. By comparing measured scanning waveforms, nonlinearities and scan line images between the uncontrolled and controlled scanner, it was found that the scanning linearity of linear scanning was improved The open-loop controlled laser scanner realizes linear scanning at 250 Hz with optical scan angle of ±12 mrad.     

TADF激基复合物主体材料提升溶液法制备蓝色荧光有机发光二极管的效率

为了提升溶液法制备的蓝色荧光有机发光二极管(OLEDs)的效率,采用了基于热激活延迟发光(TADF)的激基复合物作为主体材料。TADF激基复合物主体可以利用反向系间窜跃上转换形成单线态激子并将能量传递到客体,从而可以同时利用发光层中的三线态激子和单线态激子,以提升蓝色荧光器件的效率。选择蓝色荧光材料1-4-Di-[4-(N,N-diphenyl)amino]styryl-benzene(DSA-ph)作为客体发光材料,4,4′,4″-T-ris(carbazol-9-yl)triphenylamine(TCTA)掺杂1,3,5-Tri(1-phenyl-1H-benzo[d]imidazol-2-yl)phenyl)(TPBi)作为热激活延迟荧光激基复合物主体,通过溶液法制备了蓝色荧光OLEDs。通过测试TCTA,TPBi以及TCTA掺杂TPBi的光致发光光谱发现,与TCTA和TPBi相比,TCTA掺杂TPBi的光致发光谱(PL)发生了明显的红移(峰值波长变为437 nm),而且光谱变宽,证明了TCTA∶TPBi激基复合物的形成。通过对于DSA-ph掺杂激基复合物主体的薄膜与DSA-ph掺杂poly(methyl methacrylate)(PMMA)的薄膜进行PL测试发现,两者发光峰相同,都是来自DSA-ph的发光,说明激基复合物主体将能量传递到了DSA-ph;DSA-ph的吸收光谱与激基复合物主体的PL光谱存在很大重叠,说明激基复合物主体与DSA-ph的能量传递非常有效;通过对激基复合物主体掺杂不同浓度客体的薄膜进行瞬态PL衰减测试发现,与纯DSA-ph的寿命相比,DSA-ph掺杂激基复合物主体之后其寿命会延长,纯DSA-ph的寿命只有1.19 ns,DSA-ph掺杂激基复合物主体的荧光衰减曲线与激基复合物主体的荧光衰减曲线相似,这进一步证明了激基复合物主体将能量传递到了DSA-ph。研究了主体引入以及DSA-ph掺杂浓度对器件性能的影响。对于器件的亮度、电流密度、电压、电流效率、电致发光光谱等参数进行了测试,与不采用激基复合物主体的器件相比,采用激基复合物主体的器件性能明显改善,在DSA-ph掺杂浓度为10%时,器件亮度从2133.6 cd·m^-2提升到了3597.6 cd·m^-2,器件效率从1.44 cd·A-1提升到了3.15 cd·A-1,发光峰只有来自DSA-ph的发光。采用TADF激基复合物主体的方法有潜力实现溶液法制备的高效蓝色荧光OLEDs。     

阴离子-π复合物(I-·C6F6)的成键分析

最近Anst?ter, et al. 发表了对阴离子-π复合物(I^-·C₆F₆)的第一个定量谱学测量[J. Am. Chem. Soc. 141, 6132 (2019)],认为成键作用中相关作用占41%,静电作用占23%,得出相关作用占主导的结论. 本研究表明,该文献的“静电作用”中混入了Pauli排斥作用,后者在数值上抵消了前者的作用. 在复合物I^-·C₆F₆中,发现静电作用是相关作用的两倍多,因而阴离子-π复合物中仍应是静电作用占主导.     

VEGA: visual comparison of phylogenetic trees for evolutionary genome analysis (ChinaVis 2019)

In the field of evolutionary genome analysis, biologists seek to identify important genes or chromosome regions by comparing phylogenetic trees and analyzing the mutation at which locus might affect phenotypic traits. Unfortunately, the tree comparison and accompanying analysis are often performed manually. In this paper, we characterize the workflow of evolutionary genome analysis and present a task analysis for the fundamental questions asked by biologists during the analysis procedure. We propose two algorithms to enable quantitative tree comparison. One is to measure the differences between corresponding leaf nodes on two trees, and the other is to compute the classification inconsistency of each leaf node by comparing tree structure with a given biological classification. Configuring with the obtained difference and inconsistency, we present a visual analysis system, visual comparison of phylogenetic trees for evolutionary genome analysis, which not only enables biologists to intuitively explore trees but also identify locus which affects their traits by comparing SNP variants of selected leaf nodes. We conclude with case studies from two biologists who used our system to augment their previous manual analysis workflow and demonstrate that our system can reveal more insight.     

就单摆问题引入大学物理教学新模式

单摆教学的过程中引入MATLAB数值计算的教学新模式,可以有效地改善大学物理教学的枯燥方式,有助于提高学生对大学物理课中抽象的、复杂的物理现象和规律的理解,也有助于促进对所学数学知识的实际应用.这种新教学模式是深化高等工程教育改革、加快新工科建设、促进创新型工科人才培养的有效手段.     

A new method to test the cosmic distance duality relation using the strongly lensed gravitational waves

We propose a new method to test the cosmic distance duality relation using the strongly lensed gravitational waves. The simultaneous observation of the image positions, relative time delay between different images, redshift measurements of the lens and the source, together with the mass modelling of the lens galaxy, provide the angular diameter distance to the gravitational wave source. On the other hand, the luminosity distance to the source can be obtained from the observation of the gravitational wave signals. To our knowledge this is the first time a method is proposed to simultaneously measure the angular diameter distance and the luminosity distance from the same source. Hence, the strongly lensed gravitational waves provide a unique method to test the cosmic distance duality relation. With the construction of the third generation gravitational detectors such as the Einstein Telescope, it will be possible to test the cosmic distance duality relation with an accuracy of a few percent.     

超声动载荷下三维随机骨料混凝土的损伤

混凝土是一种由粗骨料与水泥砂浆组成的非均质复合材料。本研究利用APDL语言程序编写三维水泥混凝土骨料随机投放程序并导入ABAQUS中,同时赋予各相材料塑性损伤本构关系来研究混凝土动态加载下的破坏规律,运用超声波在混凝土破碎中的作用机理对混凝土动态损伤破坏过程进行模拟研究。结果表明:随着超声动态载荷的增大,粗骨料体积分数为40%的混凝土始终能够承受最大应力载荷;随着超声应力波幅值增大,混凝土在动载荷下的损伤值逐渐增大,且粗骨料体积分数为40%时,其抗损伤能力最优;当粗骨料最大粒径逐渐增大,或者当粗骨料最小粒径增大,混凝土级配不合理导致性能不稳定,更易损伤破坏。     

激光惯性约束聚变中光学汤姆逊散射研究进展

当前,激光惯性约束聚变在越来越接近点火的极端能量密度条件下,实验与模拟的偏离逐渐增大,一个关键原因是缺乏对黑腔等离子体状态及其影响黑腔能量学和内爆对称性的细致研究和判断。光学汤姆逊散射主动式、诊断精确、参数完备的优点,使之成为激光惯性约束聚变黑腔等离子体状态参数精密诊断的标准方法。中国面向激光惯性约束聚变研究的光学汤姆逊散射实验技术的发展与神光系列激光装置的建设和在其上开展的物理实验紧密相关。近年来,四倍频汤姆逊散射实验技术在神光III原型和100 kJ激光装置上相继建立,部分实验结果不仅加深了对激光惯性约束聚变靶物理的认识,还反映了实验条件对汤姆逊散射诊断的影响,促进了实验技术的精密化发展。在未来,还需要进一步发展多支路汤姆逊散射、五倍频汤姆逊散射和超热相干汤姆逊散射等新技术,面向点火黑腔条件,大幅提升激光等离子体状态参数的诊断精度,开展新物理机制的探索和研究,在激光惯性约束聚变和其他高能量密度物理科学领域发挥更重要的作用。