导热增强聚乙二醇相变复合材料的制备及其性能

本文以聚乙二醇(PEG)为相变材料,通过添加不同的无机填料,采用熔融共混浇筑方式制备了导热增强型相变复合材料。 通过扫描电子显微镜(SEM)、热常数分析仪、差示扫描量热仪(DSC)、红外热成像和热重分析仪研究了所制备复合材料的微观结构、导热性能与相变过程。 研究结果表明,相比于碳酸钙和氧化铝,在相同添加含量下,氮化硼(BN)可有效提高PEG的导热系数,当BN质量分数为40%时,导热系数可达到3.40 W/(m·K);当填料添加量相同时,片状BN和不规则纳米碳酸钙(CaCO₃)比球形氧化铝(Al₂O₃)对PEG具有更加优良的定型效果,在相变过程中,能够更加有效阻隔PEG的流动,保持复合材料的形状稳定性。     

Solvent Effect on the Photocatalytic Activity of g-C3N4/BiOBr and its Effect on Degradation of Acetochlor

Russian Journal of Physical Chemistry A - g-C3N4/BiOBr composites were obtained via solvothermal method. XRD, SEM, FTIR, UV–Vis DRS, BET, and BJH methods were used to characterize the...     

“蜡烛火焰划分”实验的局限成因分析及改进研究

人教版初中化学首个探究性实验"蜡烛及其燃烧"明确指出火焰的划分方法，但在实际教学中肉眼观察法和火柴梗燃烧法对蜡烛火焰的划分存在一定的局限性。采用文献研究法和实验验证法分析其局限性的成因——燃料的析炭能力强弱、材料结构的不同等，并提出相应的改进建议。     

利用手持技术探究加热过程中石棉网上表面的温度

利用手持技术实时精确测量加热中石棉网上表面不同位置的温度，采用独立样本t检验比较石棉网上表面无铁丝点和有铁丝点间的温度差异与温差差异，通过回归分析探究石棉网上表面温度与其主要影响因素间的关系。研究表明：同等条件下加热中的石棉网上表面无铁丝点与有铁丝点存在显著温度差异，而无铁丝点间的单位距离温差与有铁丝点间的单位距离温差无显著差异；石棉网升温阶段上表面温度与时间、位置的关系可拟合为二元一次线性方程，恒温阶段上表面温度与位置的关系可拟合为一元三次曲线方程；石棉网上表面温度从中心向边缘小幅递减，均匀分布，最大温差小于玻璃仪器的耐热骤变温差。研究结果为化学教育实践中科学使用石棉网以及化学实验教材的编写提供参考依据。     

退火温度对TiO2/CdSe纳米片异质结薄膜光电性能的影响

采用水热法在FTO上制备（001）高活性晶面主导的TiO₂纳米片薄膜,利用循环伏安法在TiO₂纳米片薄膜上沉积CdSe颗粒,制备了TiO₂/CdSe纳米片异质结薄膜。分别在150、250、350、450 ℃,氩气保护气氛中对样品进行退火。利用X射线衍射仪（XRD）、场发射扫描电镜（FESEM）、X射线光电子能谱分析仪（XPS）、紫外-可见（UV-Vis）分光光度计以及电化学工作站对不同温度退火后的TiO₂/CdSe纳米片异质结薄膜的微观形貌、晶体结构、光电化学性能进行表征和测试。结果表明：六方相CdSe纳米颗粒均匀包覆在TiO₂纳米片表面,直径30 nm左右;随着退火温度的升高CdSe纳米颗粒长大,形成光滑的CdSe薄膜,且晶化程度提高;TiO₂纳米片表面的Se元素与Cd元素发生氧化;TiO₂/CdSe纳米片异质结薄膜对可见光的吸收光谱发生红移,禁带宽度逐渐减小。光电化学性能测试表明随着退火温度的升高,TiO₂/CdSe纳米片异质结薄膜的光电流密度显著提高,开路电压减小,但由于SeO2和CdO的出现,导致填充因子减小,影响光电转换效率的提高。在本实验条件下,TiO₂/CdSe纳米片异质结薄膜的最佳退火温度为150 ℃,填充因子为0.77,光电转换效率达到3.12%。     

阴-非离子表面活性剂复合改性水滑石的表面性质研究

采用十二烷基苯磺酸钠（SDBS）、吐温-80（Tween-80）及两种表面活性剂复合改性镁铝水滑石,得到SDBS-LDHs,Tween-LDHs及SDBS/Tween-LDHs₃种改性水滑石。利用反相气相色谱法（IGC）对样品进行表面性质的研究,定量计算了表面吸附自由能（ΔG₀）和表面能色散组分（γ_s^d）。结果表明,改性材料的ΔG₀与γ_s^d值均比未处理的镁铝水滑石小,其中阴-非离子表面活性剂复合改性后的水滑石的ΔG₀与γ_s^d值最小,说明阴-非离子表面活性剂复合改性水滑石较单一改性水滑石更有利于提高材料的稳定性。此外,各类水滑石的γ_s^d值均随着温度的升高而减小,因此,在制备聚合物/水滑石类材料时,可以利用提高温度来改善其与聚合物的相容性。     

Resonant-Mie-scattering of aggregates of phosphomolybdate and papaverine for measuring activities and screening inhibitors of cyclic nucleotide phosphodiesterase isozymes

A resonant-light-scattering (RLS) method was proposed to quantify phosphate for screening inhibitors of isozymes of cyclic nucleotide phosphodiesterase (PDE). In acidified mixtures of phosphate, papaverine and molybdate, there were aggregates exhibiting micrometre sizes, no absorbance peaks over 360 nm but strong RLS peaks at 392 nm; Mie scattering thus accounted for the RLS signals. When papaverine was added before molybdate to acidified samples of phosphate, RLS signals at 392 nm were stable from 5 to 25 min since the addition of molybdate; after optimization, phosphate from 0.40 to 3.60 μM was quantifiable. This RLS method tolerated 60 mg L⁻¹ proteins besides common PDE inhibitors and dimethyl sulfoxide in acidified samples of phosphate; the integration of this RLS method with the coupled action of a phosphomonoesterase on PDE product was thus rational to measure PDE activities without the removal of proteins in samples. By quantifying activities of a truncated mutant of human PDE4B2 via this RLS method, Michaelis–Menten constant, inhibition constants of rolipram, papaverine and theophylline varied over three magnitudes and were consistent with those estimated by an improved malachite green assay of phosphate, respectively. Hence, this novel RLS method was promising for screening inhibitors of PDE isozymes.     

Synthesis and Mesogenic Properties of Novel Terthiophene Derivatives

To develop novel oligothiophene‐based liquid crystals involving hydrogen bonding, new terthiophene derivatives containing a stearylamide group, N,N′‐distearyl‐5,5″‐dicyano‐2,2′∶5′,2″‐terthiophene‐4,4″‐dicarboxamide (DNC₁₈DCN 3T) and N,N′‐distearyl‐5,5′‐dipropyl‐2,2′∶5′,2′‐terthiophene‐4,4″‐dicarboxamide (DNC₁₈ DP3T), were designed and synthesized, and their thermal behavior examined. Although DNC₁₈DP3T did not exhibit liquid crystallinity, DNC₁₈DCN3T was found to form smectic A phase.     

CATALASE MIMIC WITH Fe (II) METALLOMICELLE

The effect of Fe (II) metallomicelle as a model of catalase, which was formed by adding surfactants (CTAB, SDS, LSS, Brij35) in Fe (II) -trien complex of molar ratios 1: 500 on the decomposition of hydrogen peroxide was investigated at 20°C and 30°C in pH 10 using KI-color and UV Spectrophotometry. A kinetic model for metallomicellar catalysis was proposed. The association constant of the ternary complex K and the rate constant of the decomposition of hydrogen peroxide k3 were obtained. The results indicate that the metallomicelles making up of Fe (II) metal complex and cationic or nonionic surfactants have obvious catalysis on the decomposition of hydrogen peroxide, but the metallomicelles making up of Fe (II) metal complex and anionic or zwitterionic surfactants have inhibition on this reaction.     

RP-HPLC法检测发酵液中赤霉素GA4,GA7的含量

建立了反相高效液相色谱法(RP-HPLC)测定发酵液中赤霉素GA4,GA7的方法。探讨了流动相缓冲盐与甲醇的比例、缓冲盐pH、温度、流速等对两种赤霉素分离的影响,结果表明在Kromasil C18(250 mm×4.6 mm,5μm)色谱柱下,以V(甲醇):V(pH3.0,0.05 mol/L KH2PO4)=60:40为流动相,柱温35℃,流速1.0 mL/min,检测波长228nm,进样量20μL,分离度良好。GA4,GA7标准品质量浓度分别在0.1~8.0 mg/mL,0.1~3.0 mg/mL范围内线性关系良好,线性回归方程为Y4=1.58878+7.06978X4,Y7=0.48281+7.12931X7;GA4,GA7检出限分别为19.6,14.3μg/mL,平均加标回收率分别为98.8%,99.9%,相对标准偏差RSD分别为1.5%,0.34%。