Study on the Phase Diagram of CsCl-CeCl3-HCl(11%)-H2O System and the Properties of the Compounds

The equilibrium solubility of CsCl-CeCl3-HCl(11%)-H2O qua-ternary system at 25℃ has been determined by the physicchemical analysis method ,and the phase diagram was plotted, Two new double salts 3CsCl.CeCl3.3H2O and CsCl.CeCl3.4H2O obtained from the complicated system were identified and characterized by XRD,TG-DTA ,DSC,UV and fluorescence spectroscopy, Studies on the fluorescence excitation and emission show that 3CsCl.CeCl3.3H2O and CsCl.CeCl3.4H2O have upconversion luminescence of infrared-visible range,and the upconversion emission intensity increases with the increase of ratio of CeCl3 in CsCl.     

Interaction of Fluorocarbon Containing Hydrophobically Mdified Polyelectrolyte with Nonionic Surfactants

The interaction of fluorocarbon containing hydrophobically modified polyelectrolyte(FMPAANa) with two kinds of nonionic surfactants(hydrogenated and fluorinated)in a semidilute (0.5wt%) aqueous solution had been studied by rheological measurements,Association behavior was found in both systems.The hydrophobic interaction of FMPAANa with fluorinated surfactant(FC171) is much stronger than that with hydrogenated surfactant(NP7.5) at low surfactoant concentrations.The interaction is strengthened by surfactants being added for the density of active junctions increased.Whereas distinct phenomena for FC171 and NP7.5 start to be found as the surfactants added over their respective certain concentration.The interaction of polyelectrolyte with fluorinated surfactant increases dramatical ly while that with hydrogenated surfactant decreases.     

Inorganic—Organic Hybrid 18—Molybdodiphosphate Nanoparticles Bullk—modified Carbon Paste Electrode and Its Electrocatalysis

A kind of inorganic‐organic hybrid 18‐molybdodiphosphate nanoparticles ([(C₄H₉)₄N]₆P₂Mo₁₈Q₆₂·4H₂O) was firstly used as a bulk‐modifier to fabricate a three‐dimensional chemically modified carbon paste electrode (CPE) by direct mixing. The electrochemical behavior of the solid nanoparticles dispersed in the CPE in acidic aqueous solution was characterized by cyclic and square‐wave voltammetry. The hybrid 18‐molybdodiphosphate nanoparticles bulk‐modified CPE (MNP‐CPE) displayed a high electrocatalytic activity towards the reduction of nitrite, bromate and hydrogen peroxide. The remarkable advantages of the MNP‐CPE over the traditional polyoxometalates‐modified electrodes are their excellent reproducibility of surface‐renewal and high stability owing to the insolubility of the hybrid 18‐molybdodiphosphate nanoparticles.     

信号处理技术在重叠化学信号解析中的应用*

重叠峰解析是目前分析化学中亟须解决的一个重要问题,化学计量学用于重叠峰解析就是借助某些数学或统计学方法,把通过化学方法和仪器未能完全分离的复合量测信号分解成几个单儿组分的信号,从而从重叠谱中获取每个组分的相关信息。本文综述了几种常见信号处理技术在重叠化学信号分辨中的应用,引用文献146篇。     

应用普通扫描仪作薄层色谱定量分析的初步研究

尝试应用普通扫描仪作薄层色谱定量分析。样品通过硅胶板层析展开后，用碘蒸汽显色，再用普通扫描仪记录其图像，通过图像分析技术计算出斑点中样品的量。结果表明，对油醇、油酸、月桂胺和焦谷氨酸油酯等长碳链有机化合物，样点在nmol级的范围内时计算量与实际量有良好的线性相关性。     

苯基荧光酮荧光分光光度法测定痕量锗的研究

锗具有增血、抗炎症、抗衰老等多种医疗功能 ,因此 ,越来越受到人们的关注。荧光光度法测定微量锗已有报道[1～ 4] 。用苯基荧光酮荧光度法测定锗未见报道。本文利用苯基荧光酮与锗在醋酸 醋酸钠缓冲溶液中络合物形成速度快的优势 ,使其先在缓冲溶液中显色 ,然后在 0 .3ｍｏｌ ＬＨＣｌ介质中测定其荧光强度 ,用于粉煤灰中痕量锗的测定 ,得到满意结果。1　实验部分1 1　仪器与试剂ＲＦ - 5 4 0荧光分光光度计 (日本岛津 )。锗标准溶液 ( 1ｇ Ｌ) :称取 0 .1 0 0 0ｇ纯锗粉于 5 0ｍｌ小烧杯中 ,加入 5ｍｌＮａＯＨ ,再加入几滴 30 %Ｈ2 Ｏ2…     

交替三线性分解算法与反相高效液相-二极管阵列检测方法相结合同时测定苯二酚的位置异构体

 利用交替三线性分解算法与反相高效液相 二极管阵列检测 (RP HPLC DAD)相结合 ,在洗脱时间为1 0 86min～ 1 399min(间隔 1 / 1 50min)、紫外吸收波长为 2 68nm～ 2 98nm(间隔 1nm)时对苯二酚位置异构体的重叠及光谱体系进行了分辨研究。分辨结果与实际结果一致。同时测定了水溶液中共存的邻苯二酚、间苯二酚和对苯二酚的含量 ,回收率分别为 (1 0 0 1± 1 0 ) % ,(99 4± 1 4) % ,(1 0 0 5± 1 7) %。研究结果表明 :该方法定量快速准确 ,实验操作步骤简单 ,解决了在干扰物存在条件下三者很难同时分辨的问题。     

液相微波介电加热法制备纳米粒子的研究进展

随着纳米科技的飞速发展,合成纳米材料的新方法层出不穷。在这些新方法当中,液相微波介电加热法近年来得到了飞速的发展,引起了科学界越来越多的关注。本文介绍了近年来液相微波介电加热法制备纳米粒子的一些研究进展,主要是该方法在制备金属、过渡金属氧化物和金属硫族化合物纳米粒子中的应用,并且对该领域未来的发展作了一些展望。     

锡铅银等低熔点合金中氧的测定方法研究

研究了锡铅银等低熔点合金中杂质氧的测定方法。针对这些金属高温下易挥发、分解的特点，选择适宜的加热温度，使用铜和石墨粉作为浴料，选择标准坩埚，以电流920A加热进行试验。对氧的质量分数为0.017%的试样，分析精密度为5.9%，加标回收率为91％－108％。     

压力、温度和晶粒尺寸对Fe-N合金的合成及结构的影响

在 1× 1 0 - 3 Pa～ 4 GPa的压力和 5 80～ 930 K温度范围内 ,利用高压技术并结合机械球磨 ,研究了压力、温度和晶粒尺寸对α-Fe与非晶 BN的固态反应的影响 .发现高压和晶粒细化可以极大地促进α-Fe和非晶 BN的固态反应过程 ,α-Fe与非晶 BN发生固态反应的临界晶粒尺寸约 8nm.压力和温度对反应产物及其晶体结构有明显影响 .2 GPa和 80 0 K时 ,反应产物为具有正交结构的 Fe-N新相 ;在 3～ 4 GPa和 690～80 0 K时 ,可形成单一ε-Fex N合金相 ;而在 4 GPa和 930 K以上 ,反应产物由 Fe-N合金相转变为 Fe3B相