合成香料β-大马酮的高效液相色谱分析

本文提出了用分析型HPLC仪器制备β-大马酮标准品的方法及用HPLC测定β-大马酮含量的方法。制备色谱柱为Zorbax SIL 9.4 mmφ×25cm,流动相为石油醚(30～60℃)/乙醚98.5/1.5。分析用色谱柱为Shim CLC SIL 6 mmφ×15cm(岛津全多孔硅胶柱),流动相为石油醚(60—90℃)/无水乙醇99.88/0.12,检测器为紫外可见分光光度检测器。波长253nm或302nm,标准曲线的线性范围0～1.4mg/ml。峰高或峰面积均可用于测定,回收率100.7%。     

Neutron activation analysis of semiconductor materials

Two examples of the use of neutron activation analysis for the characterization of semiconductor materials are given. 23 elements were determined in ASTM silicon intercomparison samples. Most elements are below the detection limits, which vary between 0.009–300 ng/g. CdS/CdTe thin films have been characterized by determining the Cd, Te, Cl, I and In concentrations of dissolved films. Parallel determinations in different samples of films prepared under identical conditions agreed within 0–53% (average deviation 21%) for Cl, Cd, In and I in CdS and 1.6–22% (average 8.7%) for Cd and Te in CdS/CdTe, respectively. It was determined both by NAA and resonance ionization spectrometry (RIS). The order of magnitude of the results was 1 ng/g and they agree within the range 7–64% (average difference 25%). The analytical procedures are described and discussed.     

Flow injection spectrofluorimetric determination of reserpine in tablets by on-line acetone sensitized photochemical reaction

On-line photochemical reaction of reserpine in the presence of acetone was investigated. Acetone was found to speed up the on-line photochemical conversion of reserpine into an intensively fluorescent compound. Not only reaction acidity but also the acetate buffer concentration affected the on-line photochemical induced fluorescence signal. Based on the observation an automated flow injection photochemical fluorimetric approach was developed. An injected sample zone was carried by a water stream to be merged with a acetate buffer (pH 3.4) solution containing 0.02% acetone in a knotted PTFE reactor (KR), which was freely coiled around a 6-W low pressure mercury lamp. While passing the KR, reserpine was transformed into an intensively fluorescent compound. It was on-line detected in a flow-through cell at the emission wavelength of 490 nm and excitation wavelength of 386 nm. At optimized conditions, a detection limit 0.45 mug l(-1) was achieved at a sampling rate of 90 h(-1). Eleven determinations of a 0.5 mg l(-1) reserpine standard solution gave a R.S.D. of 0.3%. The linear dynamic range of reserpine calibration curve was 0.01-0.75 mg l(-1). The proposed method was applied to assay the reserpine content in tablets and to monitor the dissolution profile of reserpine tablets. Satisfactory results were obtained for both the assays and dissolution studies.     

Fluoro-substituted DPP-bisthiophene conjugated polymer with azides in the side chains as ambipolar semiconductor and photoresist

Photoresists are essential for the fabrication of flexible electronics through all-photolithographic processes. Single component semiconducting photoresist exhibits both semiconducting and photo-patterning properties, and as a result, the device fabrication process can be simplified. However, the design of semiconducting polymeric photoresist with ambipolar semiconducting property remains challenging. In this paper, we report a single component semiconducting photoresist (PFDPPF4T-N₃) by incorporating azide groups and noncovalent conformation locks into the side alkyl chains and conjugated backbones of a diketopyrrolopyrrole-based conjugated polymer, respectively. The results reveal that PFDPP4FT-N₃ exhibits ambipolar semiconducting property with hole and electron mobilities up to 1.12 and 1.17 cm² V^?1 s^?1, respectively. Moreover, field effect transistors with the individual photo-patterned thin films of PFDPPF4T-N₃ also show ambipolar semiconducting behavior with hole and electron mobilities up to 0.66 and 0.80 cm² V^?1 s^?1, respectively. These results offer a simple yet effective design strategy for high-performance single component semiconducting photoresists, which hold great potential for flexible electronics processed by all photolithography.

     

Separation and determination of podophyllum lignans by micellar electrokinetic chromatography

A micellar electrokinetic chromatography method was established for the quantitative analysis of seven podophyllum lignans in Podophyllum emodi Wall. var. chinesis sprague. The optimum buffer system was 10 mM NaH2PO4-5 mM borate-100 mM sodium dodecylsulfate-30% isopropanol (pH 7.20). Voltage was 18 kV and detection at 214 nm. The second derivative chromatogram was used to determine a low-content component and those not fully separated from adjacent ones. The RSD values of migration times and peak areas were <2.2 and <5.5%, respectively. The effects of several CE parameters on the resolutions were studied systematically.     

Use of p-dimethylaminobenzalhyde as a colored reagent for determination of procaine hydrochloride by spectrophotometry

Spectrophotometric determination of procaine hydrochloride is described. The procaine hydrochloride reacts with p-dimethylaminobenzalhyde in glacial acetic acid to form an Schiff base which is a yellow compound, and its maximum absorption wavelength is at 455nm, ₄₅₅=3.46×10⁴. The absorbance for procaine hydrochloride from 0.2 to 15 μg ml⁻¹ obeys Beer's law. The linear regression equation of the calibration graph is C=5.866A−0.02, with a linear regression correlative coefficient is 0.9994 and relative standard deviation (RSD) of 1.7%; the detection limit is 0.1 μg ml⁻¹; recovery is from 92.0 to 110.0%. Effects of reaction medium, temperature, gentamycin, beneylpenicillin, kanamycin, streptomycin, foreign ions, and stand for time on the determination of procaine hydrochloride have been examined. The results obtained by this method agreed with those by the official method (dead-stop titration). This method is rapid and simple, and can be used for the determination of procaine hydrochloride in injection solution of procaine hydrochloride.     

2-(8-quinolylazo)-7-phenylazochromotropic acid as an analytical reagent

2-(8-Quinolylazo)-7-phenylazochromotropic acid (QAPAC) has been synthesized by coupling diazotized 8-aminoquinoline with 2-phenylazochromotropic acid as well as by coupling diazotized aniline with 2-(8-quinolylazo)chromotropic acid. The properties of QAPAC and the spectrophotometric characteristics of some metal-QAPAC complexes are reported.     

Oxidative reactivity of S-nitrosoglutathione with Hantzsch 1,4-dihydropyridine

[formula: see text] S-Nitrosoglutathione oxidized 4-substituted Hantzsch 1,4-dihydropyridines in CH3CN/H2O or CH3CN/phosphate aqueous buffer solution to give aromatic products in various yields.     

A metallo-capped polyrotaxane containing calix[4]arenes and cyclodextrins and its highly selective binding for Ca2+

A water-soluble nanometer-scale metallocapped polyrotaxane has been prepared by the inclusion complexation of azo-calixarenes with metallo-bridged bis(beta-CD)s, displaying highly selective binding for Ca(2+).     

Chiral separation of N-(trans-4-isopropylcyclohexylcarbonyl)-D,L-phenylalanine isomers by high performance liquid chromatography

Summary A high-performance liquid chromatographic method was developed for the chiral separation of a new anti-diabetic agent, N-(trans-4-isopropylcyclohexylcarbonyl)-D-phenylalanine, and its L-enantiomer. The separation was performed on a Sumichiral OA-3300 column. Optimized mobile phase was 0.025 mol.L⁻¹ ammonium acetate in methanol solution. UV detection was at 210 nm. Baseline chiral separation was obtained within 12 minutes. The detection limits are 80 pg for the D-enantiomer and 120 pg for the L-enantiomer. RSD of the method was below 1% (n=5).