Numerical study of simultaneous natural convection heat transfer from both surfaces of a uniformly heated thin plate with arbitrary inclination

 Numerical studies were conducted to investigate the natural convection heat transfer around a uniformly heated thin plate with arbitrary inclination in an infinite space. The numerical approach was based on the finite volume technique with a nonstaggered grid arrangement. For handling the pressure–velocity coupling the SIMPLE-algorithm was used. QUICK scheme and first order upwind scheme were employed for discretization of the momentum and energy convective terms respectively. Plate width and heating rate were used to vary the modified Rayleigh number over the range of 4.8×10⁶ to 1.87×10⁸. Local and average heat transfer characteristics were compared with regarding to the inclination angle. The empirical expressions for local and average Nusselt number were correlated. It has been found that for inclination angle less than 10^∘, the flow and heat transfer characteristics are complicated and the average Nusselt number can not be correlated by one equation while for inclination angle larger than 10^∘, the average Nusselt number can be correlated into an elegant correlation. Received on 18 April 2001 / Published online: 29 November 2001     

Dihedral crossed products of exponent 2 are abelian

We prove that assuming enough roots of unity in the base field, a central simple algebra of exponent 2 which is split by a dihedral group, is also split by certain abelian groups.     

A Note on an Input Control Model of a Predictive Regression Interval

A well-known problem of prediction in linear regression models is to find a confidence interval for the random value of the dependent variable when the values of the independent variables are given. Such a situation may arise in economic quality control models when the independent variables are costly inputs and the dependent variable is some measure of quality or production. In such a circumstance, an important control objective may be to find values for the inputs that will maximize the lower limit of the prediction confidence interval for a fixed budget, or alternatively, to minimize the cost of the inputs for a fixed lower limit of the confidence interval. In this paper, we shall show that global optima can be found using known algorithms. The special case of simple linear regression is discussed and an illustrative example is provided.     

Influence of preparation methods on structure and properties of PA6/PA66 blends: A comparison of melt‐mixing and in situ blending

The blends composed of polyamide 6 (PA6) and polyamide 66 (PA66) were obtained using two different preparation methods, one of which was the melt‐mixing through a twin‐screw extruder and the subsequent injection molding; and the other, the in situ blending through anionic polymerization of ε‐caprolactam in the presence of PA66. For the former, there existed a remarkable improvement in toughness but a drastic drop in strength and modulus; however, for the latter, a reverse but less significant trend of mechanical properties change appeared. Various characterizations were conducted, including the analyses of crystalline morphology, crystallographic form, and crystallization and melting behaviors using polarized optical microscopy (POM), wide‐angle X‐ray diffraction (WAXD), and differential scanning calorimetry (DSC), respectively; observation of morphology of fractured surface with scanning electron microscope (SEM); measurement of glass transition through dynamic mechanical analysis (DMA); and the intermolecular interaction as well as the interchange reaction between the two components by Fourier transform infrared spectrometry (FT‐IR) and ¹³C solution NMR. The presence and absence of interchange reaction was verified for the in situ and melt‐mixed blends, respectively. It is believed that the transreaction resulted in a drop in glass transition temperature (T_g) for the in situ blends, contrary to an increase of T_g with increasing PA66 content for the melt‐mixed ones. And the two kinds of fabrication methods led to significant differences in the crystallographic form, spherulite size and crystalline content and perfection as well. Accordingly, it is attempted to explain the reasons for the opposite trends of changes in the mechanical properties for these two blends. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1176–1186, 2007     

A characterization of certain irreducible symplectic 4-folds

 We give a characterization of irreducible symplectic fourfolds which are given as Hilbert scheme of points on a K3 surface. Received: 26 June 2002 / Revised version: 9 September 2002 Published online: 14 February 2003 Mathematics Subject Classification (2000): Primary 14J32, Secondary 32Q20     

Monstrous Branes

 We study D-branes in the bosonic closed string theory whose automorphism group is the Bimonster group (the wreath product of the Monster simple group with ℤ₂). We give a complete classification of D-branes preserving the chiral subalgebra of Monster invariants and show that they transform in a representation of the Bimonster. Our results apply more generally to self-dual conformal field theories which admit the action of a compact Lie group on both the left- and right-moving sectors. Received: 20 February 2002 / Accepted: 17 August 2002 Published online: 19 December 2002 Communicated by R.H. Dijkgraaf