Nanoscale Broadband Viscoelastic Spectroscopy of Soft Materials Using Iterative Control

A novel approach to nanoscale broadband viscoelastic spectroscopy is presented. The proposed approach utilizes the recently developed modeling-free inversion-based iterative control (MIIC) technique to achieve accurate measurement of the material response to the applied excitation force over a broad frequency band. Scanning probe microscope (SPM) and nanoindenter have become enabling tools to quantitatively measure the mechanical properties of a wide variety of materials at nanoscale. Current nanomechanical measurement, however, is limited by the slow measurement speed: the nanomechanical measurement is slow and narrow-banded and thus not capable of measuring rate-dependent phenomena of materials. As a result, large measurement (temporal) errors are generated when material is undergoing dynamic evolution during the measurement. The low-speed operation of SPM is due to the inability of current approaches to (1) rapidly excite the broadband nanomechanical behavior of materials, and (2) compensate for the convolution of the hardware adverse effects with the material response during high-speed measurements. These adverse effects include the hysteresis of the piezo actuator (used to position the probe relative to the sample); the vibrational dynamics of the piezo actuator and the cantilever along with the related mechanical mounting; and the dynamics uncertainties caused by the probe variation and the operation condition. In the proposed approach, an input force signal with frequency characteristics of band-limited white-noise is utilized to rapidly excite the nanomechanical response of materials over a broad frequency range. The MIIC technique is used to compensate for the hardware adverse effects, thereby allowing the precise application of such an excitation force and measurement of the material response (to the applied force). The proposed approach is illustrated by implementing it to measure the frequency-dependent plane-strain modulus of poly(dimethylsiloxane) (PDMS) over a broad frequency range extending over 3 orders of magnitude (~1 Hz to 4.5 kHz).     

Pattern discrimination and firing behavior of cold receptor model aided with noise

A method for characterizing and identifying firing patterns of neural spike trains is presented. Three characteristic variables defined at sequential moments, including two formal derivatives and the integration of the counting process, are introduced to reflect the temporal patterns of a spike train. This paper also examines how noise interacts with encoding mechanisms of neuronal stimulus in a cold receptor. From ISI series and bifurcation diagrams it is shown that there are considerable differences in interval distributions and impulse patterns caused by purely deterministic simulations and noisy simulations. The ISI-distance can be used as an effective and powerful way to measure the noise effects on spike trains quantitatively. It is found that spike trains observed in cold receptors can be more strongly affected by noise for low temperatures than for high temperatures in some aspects; meanwhile, spike train has greater variability with the noise intensity increasing.     

Homogenization of layered elastoplastic composites: Theoretical results

Exact closed-form solutions are derived that completely characterize the effective behavior of a composite material made of elastic-perfectly plastic parallel plane layers perfectly bonded together. The derivation is framed within a rigorous theory of homogenization for elastoplastic composites, and based on the fundamental fact that the in-plane part of the strain tensor and the out-of-plane part of the stress tensor are uniform throughout the composite provided no free-edge effects occur. The obtained expressions are coordinate-free and valid in the general anisotropic case. As an example, a layered composite material with isotropic constituents is examined in detail.     

On the initial layer solution of the Boltzmann equation with small Knudsen number

We extend our method of systematic removal of secular terms in a singular perturbation treatment of the Boltzmann equation with small Knudsen numbers to the initial layer. The requirement that the solution through the initial layer should connect smoothly to the normal solution removes an ambiguity noted in our previous paper. We show that removal of secular terms improves Grad's solution for the initial layer and reintroduces soundlike modes associated with higher moments, first found by Wang Chang and Uhlenbeck.     

GaAs：Cr探测器中子辐照改性研究

介绍了一种新型脉冲辐射探测器以及提高其性能的一种方法,并报告了探测器性能与中子积分通量关系的实验结果。     

腔靶等离子体辐射温度空间分布测量

本文描述了用膜吸收法测量激光等离子体辐射温度空间分布的原理和方法给出了柱形缝靶轴向辐射温度随空间位置变化的特征,对测量结果进行了分析讨论。     

LD side-pumped Nd:GGG CW laser operating at 1110 and 1105 nm dual wavelengths and 1110 nm single wavelength

A diode-side-pumped continuous-wave Nd:GGG laser operating at dual-wavelength (1110 and 1105 nm) and single wavelength of 1110 nm is demonstrated for the first time. The maximum output power of the 1110 and 1105 nm dual-wavelength operation is 13.2 W. By adjusting the orientation of an insertion mirror, the relative intensities of the two wavelengths can be changed. Thus single wavelength operation at 1110 nm is obtained, and the output power is 9.6 W.     

Event-shape-engineering study of charge separation in heavy-ion collisions

Recent measurements of charge-dependent azimuthal correlations in high-energy heavy-ion collisions have indicated charge-separation signals perpendicular to the reaction plane, and have been related to the chiral magnetic effect(CME). However, the correlation signal is contaminated with the background caused by the collective motion(flow) of the collision system, and an effective approach is needed to remove the flow background from the correlation. We present a method study with simplified Monte Carlo simulations and a multi-phase transport model,and develop a scheme to reveal the true CME signal via event-shape engineering with the flow vector of the particles of interest.     

A novel MI-insensitive and filterless frequency octupling scheme based on two parallel dual-parallel Mach–Zehnder modulators

A novel MI-insensitive and filterless frequency octupling scheme based on two parallel dual-parallel Mach–Zehnder modulators (DP-MZMs) is proposed. The proposed scheme is not sensitive to modulation index and relatively strong MMW signal with good radio frequency spurious suppression ratio (RFSSR) can be obtained without strict requirement on modulation index. Filterless feature makes the scheme quite suitable for wavelength division multiplexing (WDM) applications. For verification, a 60 GHz millimeter wave with 44 dB RFSSR is generated from a 7.5 GHz radio frequency wave by simulation. Performance of the proposed scheme has been characterized under different conditions including DC-bias drifts of MZMs, different amplitudes of RF inputs and different extinction ratios of MZMs.